TLV2544ID - 12-Bit 200 kSPS 4-Channel SAR ADC | Texas Instruments
MPN: TLV2544ID ✓ فعالTLV2544ID جائزہ
An ADC is an interface IC that converts continuously varying analog voltages into numerical values for processing by a microcontroller, DSP, or other digital controller. The TLV2544 belongs to the SAR ADC hierarchy, where an internal sample-and-hold circuit and successive comparison stages produce a digital result. This category is used when a system needs moderate resolution, predictable conversion speed, low power consumption, and a compact serial interface rather than a high-throughput parallel converter.
The TLV2544ID combines 12-bit resolution with a maximum conversion rate of 200 kSPS and four analog input channels. Automatic power-down can be controlled in software or hardware, helping reduce current consumption when conversions are not continuous. The family also supports an eight-word FIFO and a four-channel multiplexing arrangement, allowing a compact converter to sample multiple sources sequentially. A single 2.7 V to 5.5 V supply simplifies integration with both 3.3 V and 5 V systems.
The serial interface reduces the number of PCB traces and package pins required compared with a parallel ADC. Chip select permits sharing of the serial bus, while the three-state output can isolate devices on a common data line. Because the TLV2544 is a SAR ADC, sampling behavior, source impedance, acquisition time, reference stability, and digital-interface timing are central considerations in a complete measurement chain.
Typical uses include industrial sensor acquisition, portable measurement instruments, battery-powered monitoring systems, process-control nodes, and embedded data acquisition. The four inputs are useful for monitoring thermistors, potentiometers, analog sensors, and mixed bipolar or unipolar signals when the selected input range and front-end circuitry support those sources.
For reliable operation, keep analog and return paths short, bypass the supply close to the device, and confirm the source-impedance limits for the selected sampling rate. The digital interface should also use defined levels at all times because the three-state output must not contend with another driver.
This product record combines manufacturer specifications, distributor availability information, same-family alternatives, interface guidance, and application-oriented design notes to provide practical engineering context beyond the basic ordering table.
کے لیے ڈراپ اِن متبادل TLV2544ID — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں TLV2544ID (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Conversion Time, Resolution, FIFO Depth, Input Type, Package.
TLV2544CD
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →TLV2544IPD
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
TLV2544QDRG4
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →TLV2544AID
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
TLV1504ID
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →TLV2544ID زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ADC Resolution | 12 bit |
| Conversion Rate | 200 kSPS |
| Architecture | Successive-approximation register (SAR) |
| Analog Input Channels | 4 inputs |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Conversion Time | 3.86 us |
| FIFO Depth | 8 words |
| Digital Interface | Serial, 4-wire |
| Interface Signals | CS, SCLK, SDI, and SDO |
| Serial Output | 3-state |
| Power-Down Control | Software and hardware automatic power-down |
| Process Technology | CMOS |
| پیکیج | 16-pin SOIC (D) |
| ماؤنٹنگ ٹائپ | Surface mount |
TLV2544ID 16-pin soic (d) پن کنفیگریشن گائیڈ
TLV2544ID (16-pin soic (d) پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TLV2544ID.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
TLV2544ID کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Acquisition, Portable Measurement Instrument, Battery-Powered Monitoring System, Process-Control Data Logger, Embedded Analog Control Interface, Consumer Accessory and Display Control.
Industrial Sensor Acquisition
The TLV2544ID fits industrial sensor acquisition because it combines four analog inputs with 12-bit resolution, 200 kSPS conversion capability and a 2.7 V to 5.5 V supply range. It can multiplex temperature, pressure, position and level signals into a serial data stream for a controller or industrial communications module. The four-channel arrangement reduces connector and converter count, while the 3.86 microsecond conversion time supports timely sampling. Engineers should condition each sensor, limit source impedance and protect inputs according to the manufacturer datasheet.
تجویز کردہ
Portable Measurement Instrument
The TLV2544ID supports portable measurement instruments that combine several low-bandwidth analog channels with modest resolution. Its 2.7 V minimum supply supports 3.3 V systems, while automatic power-down controlled by software or hardware can reduce consumption between measurement bursts. The 12-bit result provides 4,096 digital codes for display, logging and threshold decisions. Designers should characterize input settling, reference drift and offset error before claiming laboratory-grade accuracy.
تجویز کردہ
Battery-Powered Monitoring System
The TLV2544ID is suitable for battery-powered environmental monitoring when the converter is operated intermittently rather than continuously. Software- or hardware-controlled automatic power-down supports duty-cycled measurements, and the 2.7 V to 5.5 V operating range covers common portable supply levels. Four inputs can share one converter for temperature, light or gas-sensor channels. Actual battery-life benefit depends on active current, wake-up latency and access frequency, which are not quantified in the supplied excerpts and must be taken from the official datasheet.
تجویز کردہ
Process-Control Data Logger
The TLV2544ID can serve as the acquisition element in a process-control node that monitors several slowly changing analog variables. Four multiplexed inputs reduce the number of converters required, and the 200 kSPS capability provides substantial timing margin relative to typical temperature, pressure and flow signals. The serial interface simplifies wiring to a microcontroller or industrial bus controller. For reliable process measurements, use buffered inputs, a stable reference, adequate acquisition settling time and calibration suited to the required accuracy.
تجویز کردہ
Embedded Analog Control Interface
The TLV2544ID provides a compact analog interface for embedded controllers that need more resolution than a simple internal comparator but do not require a high-speed parallel ADC. Its CS, SCLK, SDI and three-state SDO signals permit a compact serial connection and controlled bus sharing. The 12-bit, 200 kSPS part is appropriate for potentiometer, resistor-divider and moderate-bandwidth sensor inputs. Firmware must account for multiplexing order, acquisition settling and chip-select timing to prevent inaccurate or misaligned readings.
تجویز کردہ
Consumer Accessory and Display Control
The TLV2544ID can digitize controls and simple sensor inputs in consumer accessories where board area and power are constrained. Four channels support items such as analog buttons, position controls, ambient sensing or battery monitoring, and the 2.7 V to 5.5 V range accommodates common embedded supply rails. The 12-bit resolution gives sufficient granularity for many control and display tasks. Firmware should average or filter samples when noise dominates, and the analog inputs must remain within the device's specified common-mode and full-scale limits.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا TLV2544ID — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | TLV2544CD | TLV2544IPD | TLV2544QD | TLV2544AID | TLV1504ID |
|---|---|---|---|---|---|---|
| Package | 16-pin SOIC (D) | 16-pin SOIC (D) | 16-pin SOIC (D) | 16-pin SOIC (D) | 16-pin SOIC (D) | 16-pin SOIC (D) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Conversion Rate | 200 kSPS | 200 kSPS | 200 kSPS | 200 kSPS | 200 kSPS | 200 kSPS |
| Analog Input Channels | 4 inputs | 4 inputs | 4 inputs | 4 inputs | 4 inputs | 4 channels |
| Conversion Architecture | SAR | SAR | SAR | SAR | SAR | SAR |
اہم امتیازی خصوصیات
- Four inputs in one converter (بمقابلہTLV1504ID)
- Defined single-supply operating range (بمقابلہTLV2544AID)
- Established ordering-grade alternative (بمقابلہTLV2544CD)
ڈیزائن نوٹس
Do not treat the TLV2544ID as a high-impedance meter without checking the datasheet's acquisition-time and maximum-source-impedance limits. A resistive divider, thermistor or sensor network can require more settling time than the nominal 3.86 microsecond conversion interval. Place the selected channel close to the converter, minimize trace capacitance and validate the complete source network at the intended sampling rate.
The SDO output is three-state, so firmware and board design must ensure that no other device drives the shared serial-data line while the TLV2544ID is active. Use a defined level on SDI, observe chip-select setup and hold timing around SCLK edges, and keep the serial clock away from sensitive analog input traces. Breadboard wiring is generally unsuitable for validating nanovolt-to-millivolt-scale signal integrity because contact resistance and leakage can dominate the error budget.
Place the supply bypass capacitor close to the device's supply and ground pins, and route analog inputs away from SCLK and other fast digital edges. Keep the reference and analog return paths compact because parasitic resistance and shared copper impedance can create channel-dependent offsets. When the converter shares a board with switching regulators or communications circuitry, verify the input filtering experimentally with the converter enabled and disabled across the intended operating range.
تعمیل کی معلومات
The supplied verified excerpts do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals or AEC-Q100 status. The TLV2544ID ordering grade should not be treated as automotive-qualified without an explicit AEC-Q100 statement in the manufacturer documentation.