STMicroelectronics

TS555IDT - 2.7MHz Low-Power CMOS Timer | STMicroelectronics

MPN: TS555IDT ✗ اختتامِ زندگی
2 V to 16 V Vdss 110 µA at 5 V Id 8-SOIC, 0.154 inch body width Package 2.7 MHz Speed
MOQ: 1 |

TS555IDT جائزہ

STMicroelectronics TS555IDT is a single CMOS programmable timer IC with a maximum astable operating frequency of 2.7 MHz, a 2 V to 16 V supply range, and an 8-pin SOIC package. The device provides low-power operation, with typical supply current of 110 µA at 5 V, while supporting both monostable and astable timing configurations.

A programmable timer is a timing IC that uses external resistors and capacitors to generate a delayed pulse or a periodic waveform. The TS555 belongs to the 555 timer family, which combines a voltage reference, comparators, a flip-flop, and a discharge transistor in one package. Its CMOS implementation places it within the broader semiconductor hierarchy of clock and timing ICs and programmable timer controllers.

The principal advantages of the TS555IDT are its 2.7 MHz maximum frequency, low 110 µA typical supply current at 5 V, and pin-to-pin and functional compatibility with the bipolar NE555. It supports supply voltages from 2 V to 16 V and an operating temperature range of -40°C to 125°C, making it suitable for precision timing, pulse generation, delay, and oscillator circuits across industrial and consumer systems.

Internally, the TS555 uses two comparators to monitor the timing voltage on the threshold and trigger nodes. A resistor-capacitor network controls these nodes, while the internal flip-flop determines the output state and the discharge transistor provides the reset interval. Accuracy remains stable in both one-shot and free-running modes, and the CMOS process also reduces supply-current spikes during output transitions.

Typical applications include LED and lamp flashers, debounce timers, pulse-width modulation, missing-pulse detection, periodic interrupt generation, audio tone generation, and simple RC oscillators. Its SOIC-8 package supports conventional surface-mount assembly, while its low consumption is useful in battery-operated and low-duty-cycle equipment.

When designing around the TS555IDT, maintain adequate input bypass capacitance and keep timing components close to the threshold and trigger pins. Confirm discharge-device current, output-drive capability, and duty-cycle limits against the load. Because this exact ordering code is listed as obsolete, engineers should review current STMicroelectronics timer options before committing a new production design.

This page organizes the key electrical limits, package information, pin functions, cross-reference alternatives, and practical application guidance into a compact engineering reference. It also highlights the operating distinctions that matter when comparing the TS555 with other CMOS and bipolar 555 timer implementations.

کے لیے ڈراپ اِن متبادل TS555IDT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں TS555IDT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Modes, Package, Supply Voltage Range, Typical Supply Current, Timer Type.

STMicroelectronics
Operating Modes: Astable and monostable
Package: 8-pin SOIC
موازنہ کریں TS555IDT →
STMicroelectronics
Operating Modes: Astable and Monostable
Package: 8-pin SOIC
Supply Voltage Range: 2 V to 18 V
موازنہ کریں TS555IDT →

TS555CDT

✅ ڈراپ-اِن
STMicroelectronics
📦 SOIC-8
Single CMOS programmable timer and oscillator · 2.7 MHz · 110 µA at 5 V · 2 V to 16 V · Astable and monostable · CMOS · Single timer output · 8-pin SOIC

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LMC555CM/NOPB

✅ ڈراپ-اِن
📦 SOIC-8
Same 8-pin SOIC timer footprint; documented maximum frequency is approximately 3 MHz versus 2.7 MHz for TS555IDT, a difference of 11%.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

TLC555CP

✅ ڈراپ-اِن
📦 SOIC-8
Same 8-pin SOIC timer footprint; maximum frequency is approximately 3 MHz versus 2.7 MHz for TS555IDT, an 11% difference, while supply and timing limits require verification.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

TS555IDT تفصیلات

Timer Type Single programmable timer/oscillator
Technology CMOS
Maximum Astable Frequency 2.7 MHz
Supply Voltage Range 2 V to 16 V
Typical Supply Current 110 µA at 5 V
سپلائی کرنٹ 65 µA
آپریٹنگ درجہ حرارت رینج -40°C to 125°C
پیکیج 8-SOIC, 0.154 inch body width
پنز کی تعداد 8 pins
ماؤنٹنگ ٹائپ Surface mount
Operating Modes Monostable and astable
NE555 Compatibility Pin-to-pin and functionally compatible with bipolar NE555

TS555IDT پن کنفیگریشن

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
پن 1 GND — Ground reference
پن 2 TRIG — Trigger input
پن 3 OUT — Timer output
پن 4 RESET — Reset input
پن 5 CV — Control voltage input
پن 6 THRESHOLD — Threshold input
پن 7 DISCHARGE — Discharge transistor output
پن 8 VCC — Positive supply input

عام استعمالات

TS555IDT کے لیے موزوں ہے 6 ایپلیکیشنs: Precision LED Flasher, Pulse-Width Modulation Control, Switch Debounce Circuit, Periodic Interrupt Generator, Low-Power Audio Tone Generator, Industrial Delay and Sequence Timer.

💡

Precision LED Flasher

The TS555IDT is appropriate for LED and lamp flashers because its CMOS operation limits typical supply current to 110 µA at 5 V while supporting a maximum astable frequency of 2.7 MHz. In a conventional astable circuit, the device charges and discharges a capacitor through external resistors and uses its output to gate the LED or transistor driver. The SOIC-8 package simplifies surface-mount assembly, while the standard trigger, threshold, output, discharge, reset, and control-voltage functions support straightforward timing-network layout. For battery-operated warning indicators, the low idle consumption helps preserve operating time. Designers should calculate the resistor and capacitor values for the intended flash rate, confirm that the transistor and LED remain within their current limits, and place the timing capacitor near the threshold and trigger connections to reduce sensitivity to PCB leakage and switching noise.

⚡

Pulse-Width Modulation Control

The TS555IDT can generate pulse-width-modulated control signals by operating in astable mode and adding comparator or threshold circuitry to vary the duty cycle. Its 2.7 MHz maximum frequency provides ample timing range for motor, lighting, and general-purpose proportional-control tasks, while its 2 V to 16 V supply range supports common low-voltage systems. A practical implementation uses two external timing resistors and a capacitor, with the output driving a logic gate or transistor stage rather than a load directly. The internal discharge output may also be used to form a voltage-controlled PWM circuit. Accurate PWM requires careful comparator selection, resistor tolerances, and propagation-delay analysis, particularly near the upper frequency limit. Confirm the output current and discharge-device ratings in the manufacturer datasheet before using the timer to switch high-current loads directly.

🧩

Switch Debounce Circuit

The TS555IDT can implement a monostable debounce circuit for mechanical switches, contactors, and digital control inputs. In the one-shot configuration, a valid transition triggers a fixed output pulse that prevents multiple contact events from propagating as separate commands. The low 110 µA typical supply current at 5 V is beneficial in battery-operated controls, and the 2 V to 16 V supply range allows use across several common logic levels. The external timing resistor and capacitor define the debounce interval, while the trigger and reset inputs handle edge detection and system recovery. For reliable operation, choose a timing capacitor and resistor suitable for the required pulse duration, keep leakage-sensitive nodes clean, and validate the circuit across switch bounce times, temperature, and supply variation. The reset pin should be managed carefully so normal startup does not create an unintended output pulse.

🖥️

Periodic Interrupt Generator

The TS555IDT is useful as a periodic interrupt or watchdog-delay source in embedded control systems because it can operate continuously in astable mode without a microcontroller generating the base timing. The standard trigger and threshold pins permit synchronization with an external system, while the reset input provides a direct shutdown or fault-response path. Its 2.7 MHz maximum frequency supports timing intervals well beyond typical human-interface debounce requirements, and its low CMOS supply current helps suit low-power embedded equipment. The output can drive a microcontroller interrupt line through appropriate interface logic when voltage and polarity differ. The designer must define a safe operating interval, consider oscillator drift from resistor and capacitor tolerances, and ensure that a hung timer cannot conceal the condition it is intended to report. A supervising watchdog or heartbeat check remains necessary if the timer itself is part of the safety path.

🎧

Low-Power Audio Tone Generator

The TS555IDT can generate a simple audio-frequency tone in astable mode, making it useful for alert, keypad, test, and low-cost signal-generation circuits. Its maximum frequency of 2.7 MHz allows the timing network to cover audio and ultrasonic ranges, although component parasitics become increasingly important as frequency rises. The output waveform can drive a transistor amplifier or logic-based audio stage, with series resistance used to limit load current. Compared with a bipolar NE555, the TS555’s 110 µA typical supply current at 5 V reduces power consumption in portable alert circuits. The audio frequency must remain below the application’s audible or ultrasonic requirement, and the output should not be connected directly to a low-impedance speaker without adequate drive circuitry. Verify the timer’s output characteristics and the transistor bias network to prevent clipping or excessive power dissipation.

🏭

Industrial Delay and Sequence Timer

The TS555IDT supports industrial delay, relay-actuation, and sequencing functions where a compact adjustable timer is needed. Its monostable mode can produce a defined output pulse after a triggering event, while the reset pin allows a controller to terminate the interval immediately. The -40°C to 125°C operating range is useful for industrial equipment, and the SOIC-8 package supports automated surface-mount assembly. Because the exact ordering code is listed as obsolete, a current lifecycle-compatible timer should be selected for new industrial designs after checking the full electrical limits. In an actual sequence controller, the timer output would normally drive an isolation or driver stage rather than a relay coil directly. Account for contactor inrush current, contact bounce, isolation requirements, and the tolerance of the external timing network so the sequence remains reliable across component and temperature variations.

What is the TS555IDT timer IC?
The TS555IDT is a single CMOS programmable timer IC from STMicroelectronics that supports monostable and astable operation. According to the STMicroelectronics TS555 product page, it reaches a maximum frequency of 2.7 MHz and consumes 110 µA typically at a 5 V supply. It is packaged in an 8-pin SOIC and is functionally and pin compatible with the conventional bipolar NE555 timer, making it useful for pulse, delay, oscillator, and PWM circuits.
What is the operating voltage range of TS555IDT?
The TS555IDT operates from 2 V to 16 V. This range is narrower than the maximum supply voltage commonly associated with bipolar NE555 timers, so the complete circuit must remain inside the TS555 rating even if the timer is pin compatible with an NE555. The distributor technical listing identifies a 2 V to 16 V supply range. Suitable bypass capacitors should be placed close to the supply pins to control supply transients and maintain stable timing behavior.
What is the maximum frequency of TS555IDT?
The TS555IDT supports a maximum astable frequency of 2.7 MHz. STMicroelectronics highlights this value as a major improvement over the bipolar NE555 maximum of 0.1 MHz. The useful operating frequency still depends on the selected timing resistors, capacitor tolerances, switching delays, and the required output waveform. At high frequencies, component parasitics and the timer’s switching characteristics become increasingly important to timing accuracy.
Why does TS555IDT consume less current than NE555?
The TS555IDT consumes 110 µA typically at a 5 V supply, compared with 3 mA typically for a bipolar NE555. Its CMOS implementation reduces the current required by the internal reference, comparators, and logic stages. This difference is especially useful in battery-operated equipment or long-duration timers where standby current contributes materially to total energy use, although the exact operating current still depends on supply voltage and output activity.
Where can I download the TS555IDT datasheet PDF?
The manufacturer’s TS555 product page is the primary starting point for the official TS555 documentation and datasheet access. The TS555IDT is the tape-and-reel ordering form of the TS555 family, so use the family datasheet together with the ordering-information section to confirm package and temperature-code details. The visible pin description table in that document should be used when assigning PCB tracks, and the manufacturer page is linked from this product page.
Where can I find the TS555IDT pinout?
The TS555IDT pinout uses the standard eight-function 555 timer arrangement in an SOIC-8 package. Pin 1 is GND, pin 2 is Trigger, pin 3 is Output, pin 4 is Reset, pin 5 is Control Voltage, pin 6 is Threshold, pin 7 is Discharge, and pin 8 is supply. Use the pin-description and package drawings in the manufacturer datasheet for the final PCB implementation and physical orientation.
Can TLC555CP replace TS555IDT in an 8-SOIC circuit?
The TLC555CP can serve as a pin-compatible 555 replacement when its timing, supply-voltage, output-drive, and temperature requirements match the original design. The TS555IDT is rated for 2 V to 16 V, 2.7 MHz maximum frequency, and -40°C to 125°C. Because the TLC555 family uses a different manufacturer-specific implementation, verify those limits and the output pin behavior in the replacement datasheet before production use.
When should I choose TS555IDT instead of LMC555CM/NOPB?
Choose the TS555IDT when its documented 2.7 MHz maximum frequency, 2 V to 16 V supply range, and -40°C to 125°C operating range align with the design. Choose the LMC555CM/NOPB when its manufacturer-specific frequency, supply, output, and timing limits better fit the circuit. Both use an 8-pin SOIC footprint, but package similarity alone does not replace checking the threshold, trigger, discharge-current, and output-drive specifications.
Is TS555IDT suitable for battery-powered timer circuits?
The TS555IDT is well suited to battery-powered timer circuits because its typical supply current is only 110 µA at 5 V. That operating current is substantially below the 3 mA typical current cited for a bipolar NE555. For an energy budget, also account for the load driven by the output, timing-resistor current, leakage through the timing capacitor, and any external pull-up or pull-down devices attached to the output or reset pins.
What is the best drop-in replacement for TS555IDT?
The closest documented drop-in choices are TS555CDT from the same manufacturer and LMC555CM/NOPB from a different manufacturer, subject to electrical verification. TS555CDT retains the TS555 function in an 8-pin SOIC package, while LMC555CM/NOPB provides an 8-SOIC CMOS timer with closely related timing behavior. The replacement datasheet must confirm supply range, maximum frequency, temperature grade, output current, and pin-level function.
Can an NE555 replace TS555IDT directly?
An NE555 can share the standard eight-pin timer interface, but it is not automatically equivalent under all operating conditions. The TS555IDT supports a 2.7 MHz maximum frequency and typical supply current of 110 µA at 5 V, whereas the bipolar NE555 is cited at a 0.1 MHz maximum frequency and 3 mA typical current. Direct substitution therefore requires careful review of frequency, supply voltage, timing accuracy, and output behavior.
How do I configure TS555IDT as an astable oscillator?
Configure the TS555IDT as an astable oscillator by connecting the trigger and threshold functions to the timing network and using the discharge transistor to charge and discharge a capacitor. The external resistors and capacitor determine the oscillation period and duty cycle. Keep the timing components close to the device, verify the discharge current, and account for trigger and threshold propagation delays when operating near the 2.7 MHz maximum frequency.
Where can I buy TS555IDT and check its lead time?
Use the Request a Quote form on this page to request TS555IDT availability, current lead time, minimum order quantity, and formal pricing. The exact ordering code is listed as obsolete, so availability may be limited and should not be assumed from general family listings. A quotation request should confirm the manufacturer status, shipment packaging, and whether any lot traceability can be provided.
What is the price of TS555IDT?
Use the Request a Quote form on this page for the current TS555IDT quotation, including quantity breaks and any available shipment options. Because the exact ordering code is listed as obsolete, its commercial availability may vary by lot and quantity. The form provides the appropriate channel for a current, application-specific response rather than presenting a potentially stale generic price.
Is TS555IDT in stock?
The current TS555IDT stock status should be confirmed through the Request a Quote form on this page. The manufacturer-related listing identifies the exact TS555IDT ordering code as obsolete, so inventory cannot be assumed even when related TS555 variants are available. Include your required quantity, target date, and acceptable delivery packaging in the request to obtain a direct availability response.

کے لیے انجینئرنگ ریفرنس ڈیٹا TS555IDT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the TS555IDT when an existing design requires the standard 8-pin SOIC timer interface, low CMOS consumption, operation down to -40°C, and timing frequencies well beyond the bipolar NE555 range. TS555CDT is the closest same-manufacturer alternative when the circuit does not require the TS555IDT’s extended cold-temperature capability. LMC555CM/NOPB and TLC555CP are useful cross-manufacturer alternatives because they also use an 8-pin SOIC footprint and support standard monostable and astable timer operation. Nevertheless, approve any substitution only after comparing supply limits, maximum frequency, timing tolerance, output current, discharge current, temperature grade, and reset behavior. For new designs, the obsolete lifecycle status of TS555IDT makes a currently supported timer family preferable unless maintaining an existing PCB and bill of materials is more important than lifecycle continuity.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ TS555CDT LMC555CM/NOPB TLC555CP
Brand STMicroelectronics STMicroelectronics Texas Instruments Texas Instruments
Package SOIC-8 SOIC-8 - same SOIC-8 - same SOIC-8 - same
Timer Type Single CMOS timer Single CMOS timer Single CMOS timer Single CMOS timer
Maximum Frequency 2.7 MHz 2.7 MHz Approximately 3 MHz Approximately 3 MHz
Operating Modes Monostable and astable Monostable and astable Monostable and astable Monostable and astable

اہم امتیازی خصوصیات

  • Higher maximum timing frequency than a bipolar NE555 (بمقابلہNE555)
  • Lower typical supply current than a bipolar NE555 (بمقابلہNE555)
  • Wider operating temperature range than the lower-grade TS555CDT option (بمقابلہTS555CDT)
  • Documented 2.7 MHz ceiling remains close to CMOS timer alternatives (بمقابلہLMC555CM/NOPB)

ڈیزائن نوٹس

Place the timing resistor-capacitor network close to the threshold, trigger, and discharge pins to minimize parasitic capacitance and resistive interference. Keep the control-voltage bypass capacitor close to its pin when it is used, and provide a short ground return from the timing components. Route the output separately when it drives a sensitive analog or high-impedance node. The SOIC-8 footprint is compact, so adequate copper and ground-plane continuity remain important even when the switching frequency is low.

Do not exceed the documented 2 V to 16 V supply range, and verify operation at the minimum rail required by the timing network. Decouple the supply close to pin 8 with a ceramic capacitor and provide a return path through pin 1. The typical 110 µA current at 5 V makes the TS555 efficient in standby, but output load current, timing-resistor current, and any external pull network must be included in the complete power budget.

Do not treat every NE555-compatible part as an automatic substitute. Although the TS555IDT is pin compatible with bipolar NE555 circuits, its 2.7 MHz maximum frequency and CMOS electrical behavior differ from the cited 0.1 MHz maximum and 3 mA typical current of a bipolar NE555. Confirm output drive, discharge current, supply limits, timing accuracy, and temperature grade before substitution, especially in astable or high-frequency designs.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact TS555IDT ordering code.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

TS555IDT datasheet TS555IDT pinout TS555IDT datasheet pdf TS555IDT SOIC-8 pinout TS555IDT equivalent TS555IDT replacement TS555IDT drop-in replacement TS555IDT vs TS555CDT TS555IDT vs TLC555CP STMicroelectronics TS555IDT TS555IDT 2.7MHz timer TS555IDT price TS555IDT stock TS555IDT application circuit How to replace TS555IDT

متعلقہ اجزاء اور اصطلاحات

STMicroelectronics TS555IDT TS555CDT LMC555CM/NOPB TLC555CP NE555 programmable timer 555 timer CMOS timer clock and timing IC monostable mode astable mode SOIC-8 QFN family surface-mount package 2.7 MHz 110 µA 2 V to 16 V threshold input trigger input control voltage discharge transistor LED flasher pulse-width modulation switch debounce
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں