WM8993ECS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic
MPN: WM8993ECS/RV ✓ فعالWM8993ECS/RV جائزہ
An audio codec is an interface IC that converts analog audio signals into digital data and reconstructs digital audio into analog signals. As part of the broader hierarchy of audio interface ICs, codecs connect microphones, speakers, headphones, and other analog audio hardware to a digital audio processor. Their conversion architecture, signal-to-noise performance, integrated analog drivers, package size, and power requirements determine how effectively they fit portable and embedded systems.
The WM8993ECS/RV combines a 24-bit resolution with two ADCs and two DACs in a single device. Listed ADC and DAC signal-to-noise ratios are 95 dB and 100 dB, respectively. Sigma-delta conversion supports high-resolution digital audio processing, while the integrated stereo speaker and Class W headphone drive functions reduce the need for separate output-driver circuitry in suitable speaker and headphone loads.
The WM8993ECS/RV belongs to the Wolfson audio-hub family associated with Cirrus Logic. Its integration is valuable in space-constrained systems because analog capture, digital playback, and headphone or speaker drive functions are consolidated within one 3.65 mm by 3.55 mm package. Exact clocking, supported sample rates, analog input configuration, output-power ratings, and control-interface details must be confirmed against the manufacturer datasheet before schematic capture.
Typical uses include smartphone and tablet audio, portable media players, Bluetooth audio accessories, headset electronics, compact voice-capture equipment, and connected audio products. The low-profile WLCSP footprint supports high-density PCB construction, while the integrated drivers can simplify signal routing compared with a discrete codec-and-amplifier implementation.
Designers should verify the supported microphone and line-input topology, required external passive components, digital interface voltage levels, clock sources, and thermal performance for the selected speaker impedance. The package also requires careful PCB layout with short analog paths and appropriate grounding to preserve signal integrity in compact systems.
This product page combines the manufacturer-part characteristics, converter configuration, package details, application guidance, and verified sourcing links into one engineering-focused reference. It also distinguishes directly documented attributes from parameters that must be confirmed during component selection and hardware validation.
کے لیے ڈراپ اِن متبادل WM8993ECS/RV — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںWM8993ECS/RV زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Converter Resolution | 24 bit |
| Number of ADCs | 2 |
| Number of DACs | 2 |
| Conversion Architecture | Sigma-delta |
| ADC Signal-to-Noise Ratio | 95 dB typical |
| DAC Signal-to-Noise Ratio | 100 dB typical |
| Nominal Supply Voltage | 1.2 V |
| آپریٹنگ درجہ حرارت رینج | -40°C to 85°C |
| Package Type | 48-terminal WLCSP |
| Package Dimensions | 3.65 mm x 3.55 mm |
| Terminal Count | 48 terminals |
| ماؤنٹنگ ٹائپ | SMD (SMT) |
| Packaging Type | Reel - TR |
| Integrated Speaker Driver | Stereo speaker driver |
| Headphone Driver | Class W headphone driver |
| Product Family | Wolfson audio hub |
| لائف سائیکل کی حالت | Active |
WM8993ECS/RV 3.65 mm x 3.55 mm پن کنفیگریشن گائیڈ
WM8993ECS/RV (3.65 mm x 3.55 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں WM8993ECS/RV.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
WM8993ECS/RV کے لیے موزوں ہے 6 ایپلیکیشنs: Smartphone and Tablet Audio, Bluetooth Headset Electronics, Portable Media Players, Voice-Capture and Conferencing Devices, Compact Audio Hub Products, Connected Audio and IoT Devices.
Smartphone and Tablet Audio
The WM8993ECS/RV fits compact mobile products that require microphone capture and high-resolution stereo playback in a limited board area. Its two 24-bit ADCs and two 24-bit DACs provide a unified conversion path, while the 95 dB typical ADC and 100 dB typical DAC signal-to-noise ratios establish useful converter performance targets. The integrated stereo speaker and Class W headphone drivers can also reduce the need for separate output stages. Designers should verify the supported audio interface, clocking scheme, speaker impedance, and headset-routing requirements against the manufacturer datasheet before assigning pins.
تجویز کردہ
Bluetooth Headset Electronics
The WM8993ECS/RV is suitable for Bluetooth headset and wireless audio products that need integrated microphone capture, digital playback, and headphone drive capability. Its 24-bit sigma-delta converters support high-resolution source recording and playback, while the integrated Class W headphone driver reduces the component count required around the audio output. The 3.65 mm by 3.55 mm WLCSP also supports dense headset and wearable layouts. Before schematic capture, confirm the headset impedance, microphone-bias arrangement, digital audio interface, clock source, and pin-level input-routing requirements.
تجویز کردہ
Portable Media Players
A portable media player benefits from the WM8993ECS/RV's combination of 24-bit conversion and integrated analog output functions. Two ADCs can support stereo line or microphone capture, while two DACs provide digital-to-analog playback paths and the integrated drivers target speaker and headphone outputs. Its nominal 1.2 V supply is suitable for low-voltage portable systems. The principal design trade-off is that integrated simplification does not eliminate analog-layout scrutiny: short input paths, clean return connections, appropriate decoupling, controlled clocking, and stable speaker drive are needed to realize the listed converter performance.
تجویز کردہ
Voice-Capture and Conferencing Devices
The WM8993ECS/RV can support voice-capture products that need synchronized analog input and headphone monitoring paths. Two sigma-delta ADCs provide a 24-bit conversion architecture, with a listed 95 dB typical signal-to-noise ratio suitable for many speech and conferencing systems. The integrated Class W headphone driver can handle the monitoring or receive-output stage when its specified load conditions are met. Engineering validation should cover microphone-bias voltage, input gain, sampling clock, echo-cancellation signal path, headset impedance, and the relationship between analog routing and the digital audio interface.
تجویز کردہ
Compact Audio Hub Products
The WM8993ECS/RV is appropriate for compact audio hubs that combine analog recording, digital playback, and local speaker or headphone output. Consolidating two converters and integrated drive functions into a 48-terminal WLCSP can reduce board-level component count compared with a discrete codec-and-amplifier approach. The 24-bit resolution and separate 95 dB ADC and 100 dB DAC signal-to-noise ratios give system architects clear performance targets. Actual suitability depends on supported interfaces, register configuration, output-power limits, thermal behavior, and whether the selected PCB can route high-speed digital and sensitive analog signals without excessive coupling.
تجویز کردہ
Connected Audio and IoT Devices
Connected audio products can use the WM8993ECS/RV to provide a complete analog-to-digital and digital-to-analog path around a host processor or communications SoC. Its 24-bit sigma-delta conversion supports high-resolution audio data, while integrated stereo speaker and Class W headphone drive functions provide local output options in a compact package. For connected products, engineers must carefully partition noisy digital, radio, clock, and power-supply regions from the analog section. Confirm the required digital audio protocol, supported sampling rates, I2C control arrangement, and system-level audio routing before approving the design.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا WM8993ECS/RV — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
ڈیزائن نوٹس
Route analog microphone, line-input, and headphone connections directly to the assigned WM8993ECS/RV terminals with short traces and a continuous ground reference. Keep digital interface, clock, and control routing away from sensitive audio inputs, and use a solid ground plane rather than fragmented return paths. The compact 3.65 mm by 3.55 mm WLCSP requires careful escape routing, so review every ball assignment and the manufacturer reference layout before fabrication.
Implement the manufacturer's recommended decoupling network at the supply terminals and verify it against the complete analog, digital, and driver load current. The codec has a nominal 1.2 V supply, but peripheral rails and transient events can still affect performance. Check startup order, voltage tolerances, and power-supply noise before relying on the listed 95 dB ADC or 100 dB DAC signal-to-noise ratios in the finished product.
Do not select a replacement solely by package dimensions or codec description. The WM8993ECS/RV combines 48-ball WLCSP packaging, converter topology, integrated speaker drive, Class W headphone drive, control registers, and electrical limits. A redesign requires checking every power pin, analog connection, clock, and digital signal. Likewise, confirm speaker impedance and headphone loading before using the integrated drivers, since connector or headset choices can change the required drive configuration.
Treat clocks and digital audio signals as high-speed interfaces even though the package is small. Use short point-to-point clock routes, provide the external components and termination specified by the manufacturer, and keep switching-node or radio-frequency regions away from microphone and headphone inputs. Validate the finished board with eye measurements where digital interfaces are involved and with THD-plus-noise measurements across the intended output-load conditions.
تعمیل کی معلومات
The device is an active audio codec. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the product information and remain unknown.