WM9082ECSN/R - 3W Mono PDM Class D Driver | Cirrus Logic
MPN: WM9082ECSN/R ✓ فعالWM9082ECSN/R جائزہ
A Class D audio amplifier is a switching power amplifier that converts a digital or analog audio signal into a pulse-width-modulated output. The switching elements deliver energy to the speaker rather than dissipating the entire audio waveform as linear amplifiers do. A PDM input, also called pulse-density modulation, represents audio samples as a one-bit stream whose density changes over time. In the signal chain, the WM9082 belongs to the audio amplifier hierarchy and converts a PDM source into a mono Class D speaker output.
The WM9082ECSN/R provides a single mono output channel and is identified as a 3 W Class D speaker driver. Its operating characteristics include PDM input support and automatic output enablement when PDM audio data is detected or when a valid Start-Up Control Code is received. These functions are useful in portable and embedded audio products because they allow the amplifier to remain inactive until valid audio activity is present, helping reduce unnecessary system activity.
The compact 9-W-CSP construction is suitable for wearables, portable speakers, smart-home accessories, and compact consumer electronics where board area is limited. Because the package has a small thermal and electrical footprint, careful PCB layout is important. The speaker output, ground connection, PDM clock and data lines, supply connections, and any external filtering components should follow the manufacturer reference layout and recommended component values. This page emphasizes the distinctions that matter during schematic capture, PCB implementation, and sourcing.
The WM9082 is most appropriate when the host processor or codec already supplies PDM audio and the system needs a compact mono speaker stage. It is less suitable for designs requiring conventional analog line input, multiple output channels, or a larger specified output-power level without reviewing the complete datasheet limits. The available listings also describe the device as a Cirrus Logic mono Class D audio amplifier, while the underlying datasheet identifies the original manufacturer as Wolfson Microelectronics.
Use the manufacturer datasheet for the definitive electrical limits, recommended application circuit, pin description, exposed-ball configuration, and startup-code behavior. In particular, verify the allowed supply range, output-power conditions, speaker impedance, decoupling requirements, clocking limits, and PCB land pattern before release. The 1.57 mm by 1.47 mm package also makes assembly capability and land-pattern validation important during hardware planning.
This page organizes the key WM9082ECSN/R specifications, sourcing information, application guidance, and replacement constraints in one place. It also distinguishes confirmed drop-in substitutions from broadly similar Class D drivers, helping engineers avoid choosing a device merely because its output wattage appears similar but whose package, pinout, input architecture, or control interface differs.
کے لیے ڈراپ اِن متبادل WM9082ECSN/R — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںWM9082ECSN/R زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | Mono Class D audio speaker-driver IC |
| Output Channel Count | 1 channel |
| آؤٹ پٹ کنفیگریشن | Mono |
| Amplifier Type | Class D |
| Maximum Output Power | 3 W |
| Alternate Listing Output Power | 9 W |
| Audio Input Format | PDM |
| Package Type | 9-W-CSP |
| Package Dimensions | 1.57 mm x 1.47 mm |
| Ball Count | 9 balls |
| ماؤنٹنگ ٹائپ | Surface mount |
| Output Enable Behavior | Enabled when PDM audio data is detected or a valid Start-Up Control Code is detected |
WM9082ECSN/R 1.57 mm x 1.47 mm پن کنفیگریشن گائیڈ
WM9082ECSN/R (1.57 mm x 1.47 mm پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں WM9082ECSN/R.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
WM9082ECSN/R کے لیے موزوں ہے 6 ایپلیکیشنs: Portable Mono Speaker, Wearable Audio Module, Smart Home Assistant, Compact Instrumentation Speaker, Connected Sensor Node, Digital Audio Accessory.
Portable Mono Speaker
The WM9082ECSN/R fits a portable mono speaker platform where the audio source already provides PDM data and the enclosure offers limited PCB area. Its 3 W-class Class D output stage and 1.57 mm by 1.47 mm 9-W-CSP package leave more room for the battery, controls, and protection circuitry than a larger conventional package. The Class D output is enabled when PDM audio data is detected or a valid Start-Up Control Code is received, allowing the amplifier to remain inactive during quiet system states. Before layout release, verify the actual battery voltage range, speaker impedance, peak output current, and thermal performance under the worst-case enclosure condition.
تجویز کردہ
Wearable Audio Module
The WM9082ECSN/R is suitable for a wearable audio module when a low-power host can output PDM audio directly. Its small 9-W-CSP footprint supports dense assembly, and the PDM-input architecture can simplify the analog signal path compared with a conventional line-input amplifier. Output-enable behavior tied to detected audio or a valid startup control code can also support activity-aware operation. The design must still account for the 3 W-class output condition, speaker impedance, peak excursion, and heat dissipation in a tightly enclosed wearable enclosure.
تجویز کردہ
Smart Home Assistant
A smart-home notification or voice-response speaker can use the WM9082ECSN/R to convert a PDM source into a compact mono Class D output. The 1.57 mm by 1.47 mm package is useful in enclosure designs where connector placement and battery volume constrain the main board. Detection of PDM audio provides a straightforward activation path for intermittent voice prompts, while the Start-Up Control Code offers another controlled-enable condition. Check whether the assistant platform supplies PDM directly and validate supply, clocking, and speaker-load requirements before selecting it.
تجویز کردہ
Compact Instrumentation Speaker
The WM9082ECSN/R can serve as a compact alert or status-speaker amplifier in test-and-measurement equipment when the internal digital audio engine outputs PDM. Its small package supports placement near the speaker connector, and Class D output is appropriate for low-power audio reproduction where efficiency and board area matter. The system designer must still manage PDM clock generation, startup behavior, output filtering, and EMI from the switching stage. A dedicated analog-output architecture may be preferable when the instrument already produces conventional analog audio.
تجویز کردہ
Connected Sensor Node
An IoT sensor node with a local audible alert can use the WM9082ECSN/R when its host controller exposes PDM audio. The small 9-W-CSP package is beneficial in a compact enclosure, and the 3 W-class output is appropriate for short voice or tone notifications. Automatic enablement upon detected PDM data helps prevent the Class D output from running during periods without valid audio. System-level design still needs to cover rail sequencing, speaker impedance, peak current, acoustic limits, and behavior during host reset or clock loss.
تجویز کردہ
Digital Audio Accessory
The WM9082ECSN/R fits a dedicated digital-audio accessory that receives PDM from a phone, host processor, or audio codec and drives one small speaker. Its mono Class D architecture avoids requiring a separate analog mixer for that signal path, while the 1.57 mm by 1.47 mm package supports compact accessory boards. The part can activate when valid PDM audio is detected or through the documented Start-Up Control Code. Firmware should avoid presenting invalid PDM data and should coordinate startup so the speaker receives a controlled audio stream.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا WM9082ECSN/R — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Brand | Cirrus Logic |
| Package | 9-W-CSP (1.57 mm x 1.47 mm) |
| Output Channel Count | 1 channel |
| Output Configuration | Mono |
| Amplifier Class | Class D |
| Described Output Power | 3 W in manufacturer datasheet index; one distributor catalog describes 9 W |
| Audio Input | PDM |
| Output Enable Function | PDM-data detection or valid Start-Up Control Code |
| Ball Count | 9 balls |
اہم امتیازی خصوصیات
- Direct PDM input simplifies the digital-audio signal path (بمقابلہA conventional analog-input 3 W Class D amplifier)
- Exceptionally compact 9-ball W-CSP implementation (بمقابلہA larger-package mono Class D speaker driver)
- Two documented output-enable conditions (بمقابلہA continuously enabled Class D output stage)
ڈیزائن نوٹس
Use the exact 9-ball land pattern defined by the manufacturer for the 1.57 mm by 1.47 mm W-CSP. Place the input, ground, supply, and speaker-output connections directly beneath or immediately adjacent to their corresponding balls, and minimize loop area in the switching current path. The small package leaves little room for long escape traces, so footprint verification should include ball numbering, solder-mask definition, paste apertures, and assembly orientation rather than relying on a generic 9-pad drawing.
Decouple the Class D amplifier with the capacitance and placement specified by the manufacturer. Route the supply and ground return as short, low-impedance paths, and separate sensitive PDM clock and data routing from speaker outputs wherever the board area permits. Because the indexed catalog descriptions show different power classifications, confirm the guaranteed output-power conditions and peak supply current before sizing the battery, regulator, traces, and protection network.
Treat the speaker output as a high-current switching node. Keep the Class D output loop compact, use the recommended output-filter topology, and observe differential-versus-single-ended routing requirements from the datasheet. Provide a continuous ground reference beneath the relevant circuitry when the board stackup permits, and compare conducted and radiated emissions with the final enclosure, speaker cable, power supply, and neighboring digital clocks. PCB changes can be more effective than filtering because they reduce the original switching-loop area.
Do not substitute a generic 3 W Class D amplifier solely because its catalog rating is similar. The WM9082ECSN/R has a PDM input, specific 9-ball package, documented enable conditions, and a defined Start-Up Control Code path. Before redesigning or replacing it, verify supply limits, speaker impedance, PDM clock requirements, startup timing, pin functions, output filtering, and the exact land pattern. Also confirm that the host stops or invalidates PDM data when the amplifier should remain quiet.
تعمیل کی معلومات
The indexed product records contain a lead-free and RoHS status field but do not display the corresponding compliance values. Automotive qualification, halogen-free status, and conflict-minerals declarations were not established and therefore remain unknown.