XC2C256-7CP132I - 256-Macrocell 6.7ns CPLD | AMD
MPN: XC2C256-7CP132I ✓ فعالXC2C256-7CP132I جائزہ
A complex programmable logic device, or CPLD, combines multiple programmable logic arrays with a deterministic interconnect structure. Within the programmable-logic hierarchy, the XC2C256 belongs to the CoolRunner-II CPLD family and provides nonvolatile, reprogrammable implementation of combinational and sequential logic. Compared with an FPGA, this architecture offers predictable routing and a relatively simple design flow for glue logic, control logic, and compact system functions.
The CoolRunner-II family is optimized for 1.8 V systems and offers pin-to-pin delays as fast as 5.7 ns across the family. The XC2C256 contains 256 macrocells and approximately 6,000 logic gates. Its 132-ball CSBGA package supports compact PCB layouts, while the industrial temperature grade is intended for equipment operating across extended industrial temperature conditions.
The target part uses a 6.7 ns speed designation, placing it between the faster and slower device grades in the CoolRunner-II portfolio. Its 0.18 µm CMOS implementation supports high integration in a low-voltage design. The 88-user-I/O configuration provides substantial connectivity for buses, control signals, counters, state machines, and interface logic without requiring a larger programmable-logic device.
Typical implementations include industrial control and automation, communications equipment, embedded interface logic, real-time signal processing, and hardware acceleration. Its macrocell-based organization is particularly useful when a design requires stable timing, compact logic density, and straightforward reconfiguration compared with a much larger FPGA or an application-specific standard product.
PCB design should preserve the manufacturer's recommended power, ground, clock, and decoupling arrangements because the 132-ball package requires careful via and escape-routing planning. Validate signal integrity on high-speed board transitions and confirm the device's supported I/O standards against the system design before release.
This product page combines the key CoolRunner-II electrical characteristics, pin-compatible selection guidance, temperature-grade distinctions, and practical PCB considerations into a concise engineering reference for design, sourcing, and lifecycle-risk reviews.
کے لیے ڈراپ اِن متبادل XC2C256-7CP132I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC2C256-7CP132I (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Device Type, Package, Speed Grade, Temperature Grade, Terminal Type.
XC2C256-7CP132C
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC2C256-7CPG132I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC2C256-6CP132I
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC2C256-5CP132I
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC2C256-8CP132I
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC2C256-7CP132I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | CoolRunner-II complex programmable logic device |
| Macrocells | 256 macrocells |
| Logic Capacity | Approximately 6,000 gates |
| Speed Grade | 6.7 ns |
| Family Pin-to-Pin Delay | As fast as 5.7 ns |
| User I/O Count | 88 user I/Os |
| سپلائی وولٹیج | 1.8 V |
| Process Technology | 0.18 µm CMOS |
| پیکیج | 132-ball CSBGA |
| Terminal Type | 132 BGA balls |
| Temperature Grade | Industrial |
| کوئیسینٹ کرنٹ | As low as 13 µA |
| Programmable Logic | 256 macrocells with nonvolatile reprogrammable configuration |
| ماؤنٹنگ ٹائپ | Surface mount |
XC2C256-7CP132I 132-ball csbga پن کنفیگریشن گائیڈ
XC2C256-7CP132I (132-ball csbga پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC2C256-7CP132I.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC2C256-7CP132I کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control Logic, Communications Interface Control, Real-Time Signal Conditioning, Embedded Hardware Acceleration, Data Acquisition and Instrumentation, Programmable Interface Consolidation.
Industrial Control Logic
The XC2C256-7CP132I fits industrial control blocks that require deterministic programmable logic, 256 macrocells, and 88 user I/Os without the overhead of a larger FPGA. Its 6.7 ns speed grade can support tightly timed control, interlock, sequencing, and machine-state functions at a 1.8 V supply. The 132-ball CSBGA also allows a compact land pattern, but dense BGA routing requires uninterrupted power and ground planes. The industrial temperature designation is intended for extended industrial environments, subject to confirmation of the complete device limits and system qualification.
تجویز کردہ
Communications Interface Control
The XC2C256-7CP132I is useful for protocol framing, command decoding, buffer management, and interface isolation in communications equipment. Its 256 macrocells and 88 I/Os provide enough resources to consolidate several control paths, while the 6.7 ns speed class offers additional timing margin for synchronous logic. Operate the device from 1.8 V and validate each I/O against the interface standard and system clocking. The compact CSBGA package supports space-constrained designs, although signal-integrity and via-in-pad or fanout practices determine whether the full I/O performance can be maintained.
تجویز کردہ
Real-Time Signal Conditioning
The XC2C256-7CP132I can implement deterministic sampling control, digital filtering, pulse shaping, trigger logic, and test-sequence generation for real-time signal-processing systems. Its 6.7 ns speed grade and macrocell-based interconnect suit designs where repeatable routing and compact logic are more important than very high FPGA throughput. The 88 user I/Os support multiple concurrent data channels, while the 1.8 V architecture simplifies integration with modern low-voltage components. Validate setup and hold timing at each interface and ensure that external analog stages do not require a different sampling speed grade.
تجویز کردہ
Embedded Hardware Acceleration
The XC2C256-7CP132I can offload fixed control, checksum, packet filtering, or hardware acceleration functions adjacent to a host processor. With 256 macrocells and 88 I/Os, it is appropriate for compact accelerator logic that requires nonvolatile reconfiguration and deterministic behavior. The 6.7 ns device grade provides useful timing headroom for synchronous pipelines, and the 132-ball CSBGA minimizes package footprint compared with many leaded packages. Interface protocols, arbitration, interrupt handling, and clock-domain boundaries must be defined explicitly so the accelerator does not compromise the host system's timing or reliability.
تجویز کردہ
Data Acquisition and Instrumentation
The XC2C256-7CP132I is suitable for acquisition control, sensor multiplexing, trigger management, calibration sequencing, and data-transfer control in compact instrumentation. The 88 I/Os allow parallel sensor lines and digital controls to be consolidated, while the 256 macrocells can host counters, state machines, and timing logic. Its 6.7 ns speed grade is useful for synchronous acquisition paths where deterministic delays simplify calibration. Care is required with high-impedance analog inputs, which still need suitable buffers, and every acquisition clock and control output should be checked against the instrument's timing budget.
تجویز کردہ
Programmable Interface Consolidation
The XC2C256-7CP132I can consolidate several legacy or asynchronous interfaces into one programmable subsystem, reducing the number of separate fixed-function logic devices. Its 88 I/Os provide ample routing capacity for bus arbitration, level conversion control, status registers, and fault handling, and the 6.7 ns grade supports synchronous control logic. The 1.8 V supply suits compact modern systems, but legacy voltage domains still require correctly rated interface components. Because CSBGA routing is dense, preserve via access beneath the device, maintain a continuous return path, and validate all external interface timing before fabrication.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC2C256-7CP132I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC2C256-7CP132C | XC2C256-7CPG132I | XC2C256-6CP132I | XC2C256-5CP132I | XC2C256-8CP132I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 132-ball CSBGA | 132-ball CSBGA | 132-ball CSBGA | 132-ball CSBGA | 132-ball CSBGA | 132-ball CSBGA |
| Macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells |
| Speed Grade | 6.7 ns | 6.7 ns | 6.7 ns | 6 ns | 5 ns | 8 ns |
| Temperature Designation | I - industrial | C - commercial | I - industrial | I - industrial | I - industrial | I - industrial |
| Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| User I/O Count | 88 user I/Os | 88 user I/Os | 88 user I/Os | 88 user I/Os | 88 user I/Os | 88 user I/Os |
| Process Technology | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS |
اہم امتیازی خصوصیات
- Industrial-temperature ordering option (بمقابلہXC2C256-7CP132C)
- Higher timing performance than the 8 ns family alternative (بمقابلہXC2C256-8CP132I)
- Balanced speed grade for deterministic control (بمقابلہXC2C256-5CP132I)
ڈیزائن نوٹس
Design the 132-ball CSBGA layout from the manufacturer ball map and escape-routing guidance. Use short, symmetric signal escapes where possible, place input and output decoupling close to the relevant supply balls, and provide continuous power and ground planes beneath the device. Via access must not compromise assembly density or solderability, particularly if the design uses fine-pitch fanout rather than via-in-pad.
Treat every high-speed edge as a controlled-impedance transition and route clocks away from noisy switching nodes. The 6.7 ns speed grade does not remove the need for source termination, series damping, or receiver slew-rate checks on external lines. Validate setup and hold timing with realistic external loading and include the effects of package and PCB variation when closing timing for 1.8 V interfaces.
Do not substitute the commercial-temperature XC2C256-7CP132C for the industrial XC2C256-7CP132I without reviewing the required ambient range. Also check whether a changed speed grade alters timing margins or introduces downstream cost. Verify the complete ordering code, 132-ball package, configuration method, I/O standards, and tool compatibility before treating any XC2C256 variant as a production replacement.
Decouple the 1.8 V supply according to the CoolRunner-II family recommendations and account for simultaneous output switching in the power-budget calculation. Keep sensitive control and configuration routing away from switching-current paths. If the board combines this CPLD with high-speed or high-current circuitry, provide a low-impedance return network and avoid sharing narrow supply traces between the programmable-logic device and unrelated loads.
تعمیل کی معلومات
The industrial temperature designation is identified, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is listed in the referenced product information. AEC-Q100 is not applicable to this programmable-logic device classification.
