XC2C64A-7CPG56C 64-Macrocell Low-Power CPLD | AMD
MPN: XC2C64A-7CPG56C ✓ فعالXC2C64A-7CPG56C جائزہ
A CPLD is a programmable-logic semiconductor that converts Boolean equations and state-machine logic into a fixed interconnect and logic structure. Within the broader hierarchy, a CPLD is a programmable-logic device, a digital semiconductor, and a flexible alternative to mask-programmed logic. Its nonvolatile configuration allows the same board to support firmware revisions, interface options, and product variations without replacing the device.
Key features of the XC2C64A-7CPG56C include 64 macrocells, 45 user I/O pins, 1.8 V operation, 1.5K logic gates, and a 0.18 μm CMOS process. The -7 speed designation corresponds to a 6.7 ns pin-to-pin delay according to the listed component description, while family literature identifies performance as fast as 4.6 ns and approximately 159 MHz. Quiescent current is listed as low as 15 A, although the current unit should be confirmed against the manufacturer datasheet before using it in a power budget.
The architecture uses interconnected macrocells with a programmable AND-array and OR-array structure. This architecture favors compact synthesis of decoders, state machines, bus logic, address decoding, and interface glue logic. Its low-power 1.8 V orientation is useful in systems where the CPLD interfaces with modern low-voltage logic and consumes limited standby power. In-system programming supports configuration updates during manufacturing, test, or field maintenance.
Typical applications include industrial control panels, communication adapters, sensor and actuator interfaces, instrumentation, embedded protocol bridges, and general-purpose board-support logic. The 45 available I/O pins make it appropriate for parallel data paths, control signals, and mixed external interfaces. Unlike a software processor, the CPLD executes deterministic hardware logic immediately after configuration and does not depend on firmware execution time.
Designers should verify the ball assignments, power rails, configuration pins, and I/O standards against DS311 before layout release. The 56-ball CSBGA package requires careful escape routing, adequate ground distribution, and assembly-process control. Confirm the exact temperature grade, AC and DC timing limits, supported I/O voltage combinations, and power consumption under the intended workload.
This page combines the AMD manufacturer data sheet, distributor listings, lifecycle cross-reference information, and application-oriented engineering guidance. It also distinguishes documented pin-for-pin replacements from broader CPLD alternatives that use different packages or architectures and therefore are not true drop-in choices.
کے لیے ڈراپ اِن متبادل XC2C64A-7CPG56C — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC2C64A-7CPG56C (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package Type, User I/O Count, Device Type, Internal Frequency, Mounting Type.
XC2C64A-7CPG56I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC2C64-7CPG56C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC2C64A-7CPG56C زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | CoolRunner-II complex programmable logic device |
| Macrocell Count | 64 macrocells |
| User I/O Count | 45 user I/O pins |
| Logic Gate Capacity | 1.5K gates |
| Process Technology | 0.18 μm CMOS |
| Core Supply Voltage | 1.8 V |
| Speed Grade | -7 |
| Pin-to-Pin Delay | 6.7 ns |
| Maximum Pin-to-Pin Logic Delay | 4.6 ns |
| Internal Frequency | 333 MHz |
| Maximum Frequency | 159 MHz |
| Programmable Type | In-system programmable |
| پیکیج | 56-pin CSBGA, 6 mm × 6 mm, 0.50 mm pitch |
| Logic Family | CMOS |
| RoHS اسٹیٹس | RoHS compliant |
| Lead-Free Status | Lead free |
XC2C64A-7CPG56C 56-pin csbga, 6 mm × 6 mm, 0.50 mm pitch پن کنفیگریشن گائیڈ
XC2C64A-7CPG56C (56-pin csbga, 6 mm × 6 mm, 0.50 mm pitch پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC2C64A-7CPG56C.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC2C64A-7CPG56C کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control and Interface Logic, Communication Protocol Adapters, Sensor and Actuator Aggregation, Instrumentation and Test Systems, Embedded Board Support Logic, Low-Power 1.8 V Embedded Products.
Industrial Control and Interface Logic
The XC2C64A-7CPG56C is appropriate for consolidating control-plane functions such as command decoding, interlocks, alarm logic, and actuator sequencing in a compact 56-pin CSBGA package. Its 64 macrocells and 45 user I/O pins provide substantial connectivity for 1.8 V industrial control boards without requiring a processor for every simple decision. In-system programming allows configuration revisions during production testing or field maintenance. The principal engineering check is the exact temperature grade and I/O voltage combination, because those order-code and board-level requirements determine whether the device remains suitable for the enclosure environment.
تجویز کردہ
Communication Protocol Adapters
The XC2C64A-7CPG56C can implement compact protocol adapters, framing logic, command filters, and legacy-to-modern interface conversions when the required logic fits within 64 macrocells. Its 45 user I/O pins allow parallel data, control, and status signals to be coordinated close to a transceiver or connector. The CPLD provides deterministic hardware behavior and supports in-system programming for configuration updates. Engineers should establish the worst-case combinational delay, clock-domain requirements, and I/O timing before committing to a protocol conversion, since the 6.7 ns listed -7 delay may constrain high-frequency paths.
تجویز کردہ
Sensor and Actuator Aggregation
For measurement and control modules, the XC2C64A-7CPG56C can aggregate sensor inputs, apply thresholds, generate actuator enables, and manage board-level handshake signals. Its 45 user I/O pins are useful when several digital sensors, relays, indicators, and multiplexers share a common 1.8 V logic domain. In-system programming simplifies configuration traceability across multiple board variants. Because the CPLD does not add analog measurement accuracy, sensor conditioning and power isolation remain separate concerns. Board designers should also verify unused-pin behavior and supply sequencing against the manufacturer data sheet before releasing the PCB.
تجویز کردہ
Instrumentation and Test Systems
The XC2C64A-7CPG56C is well suited to instrumentation front ends that need deterministic control of relays, status indicators, acquisition triggers, and test-sequence logic. Its 64 macrocells can consolidate multiple small state machines and address decoders around a larger processor or converter. The 1.8 V optimization aligns with modern low-voltage test and measurement electronics, while in-system programming supports product-specific test configurations. For laboratory-grade designs, engineers should calculate timing margins using the actual logic depth and verify that the selected temperature and supply combinations meet the instrument’s calibration and reliability requirements.
تجویز کردہ
Embedded Board Support Logic
The XC2C64A-7CPG56C can implement boot sequencing, bus arbitration, interrupt routing, reset distribution, peripheral chip selects, and legacy interface glue around a host processor. Consolidating these functions into a 64-macrocell CPLD reduces discrete glue logic while preserving deterministic startup behavior. Its 45 user I/O pins provide sufficient connectivity for modest systems, and in-system programming permits configuration updates without changing the board mask. The CPLD should be assigned reset and configuration responsibilities only after checking power-up states, pin contention, and clock-domain crossings, since incorrect assumptions can prevent reliable system startup.
تجویز کردہ
Low-Power 1.8 V Embedded Products
The XC2C64A-7CPG56C targets compact 1.8 V embedded products where low-power CMOS programmable logic is preferable to continuously running a processor for simple control tasks. It can wake logic, interpret inputs, and control outputs with deterministic latency after configuration. The 56-pin CSBGA package supports space-constrained designs, although its 0.50 mm pitch requires fine-pitch assembly capability and careful escape routing. Before release, validate actual current against the device configuration and switching activity, because the published low-current figure should be interpreted together with the operating-condition table in AMD DS311.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC2C64A-7CPG56C — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC2C64A-7CPG56I | XC2C64-7CPG56C |
|---|---|---|---|
| Package | 56-pin CSBGA, 6 mm × 6 mm, 0.50 mm pitch | 56-pin CSBGA, 6 mm × 6 mm, 0.50 mm pitch | 56-pin CSBGA, 6 mm × 6 mm, 0.50 mm pitch |
| Brand | AMD | AMD | AMD |
| Device Type | CoolRunner-II CPLD | CoolRunner-II CPLD | CoolRunner-II CPLD |
| Macrocell Count | 64 macrocells | 64 macrocells | 64 macrocells |
| User I/O Count | 45 user I/O pins | 45 user I/O pins | 45 user I/O pins |
| Core Supply Voltage | 1.8 V | 1.8 V | 1.8 V |
| Process Technology | 0.18 μm CMOS | 0.18 μm CMOS | 0.18 μm CMOS |
| Programming | In-system programmable | In-system programmable | In-system programmable |
| Temperature-Grade Suffix | Commercial C suffix | Industrial I suffix; operating limits differ | Original-family C suffix |
اہم امتیازی خصوصیات
- Enhanced A-series CoolRunner-II option (بمقابلہXC2C64-7CPG56C)
- Same-footprint temperature-grade option (بمقابلہXC2C64A-7CPG56I)
- Compact 45-user-I/O integration (بمقابلہXC2C64A-7CPG56I)
ڈیزائن نوٹس
Treat the 56-pin CSBGA as a fine-pitch assembly design with a 0.50 mm ball pitch. Follow the land pattern, mask definition, solder-mask expansion, and paste recommendations in DS311 rather than deriving dimensions from the nominal ball pitch. Place the device so short-via fanout is possible on every signal and ground ball, and provide an uninterrupted ground-reference plane wherever the footprint permits.
Decouple each applicable supply rail near its package balls with the capacitance and ESR characteristics specified by AMD. Keep configuration, control, and I/O return paths away from noisy switching-current loops. Validate the design against the DC and AC power-supply specifications in DS311; the listed quiescent-current figure should not be used as total device consumption without adding dynamic and I/O load current.
Create timing constraints using the actual macrocell depth and the -7 speed-grade limits from DS311, rather than relying on the advertised frequency alone. Account for board skew, loading, and clock uncertainty on external interfaces. If the design combines asynchronous inputs with registered logic, use synchronizers and define reset-domain behavior explicitly to avoid metastability or unintended startup states.
Do not treat similar family members as automatic replacements. The XC2C64A-7CPG56I changes the temperature-grade suffix, while XC2C64-7CPG56C is the original-family ordering code. Confirm package balls, temperature range, timing grade, power behavior, programming requirements, and lifecycle status for each exact suffix. Also verify that board layouts intended for CSP-style packages are not mistakenly reused for the CSBGA variant.
تعمیل کی معلومات
The product listing identifies the XC2C64A-7CPG56C as RoHS compliant and lead free. REACH, halogen-free, conflict-minerals, and automotive qualification status are not established by the available records.