XC3S400-5FGG456C - 8064-Cell Spartan-3 FPGA | AMD
MPN: XC3S400-5FGG456C ✗ اختتامِ زندگیXC3S400-5FGG456C جائزہ
A field-programmable gate array is a semiconductor whose digital logic, memory blocks, and I/O behavior are configured after fabrication. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. It differs from a fixed-function application-specific integrated circuit because one physical device can implement many control, interface, and signal-processing functions through a downloadable bitstream. The Spartan-3 family combines configurable logic, block RAM, dedicated multipliers, digital clock management, and programmable I/O.
The XC3S400-5FGG456C provides 8,064 configurable logic cells, approximately 400,000 system gates, and 264 I/O. Its 1.2 V operating voltage and 90 nm process identify it as a Spartan-3 device rather than a later-generation FPGA. The -5 speed designation identifies the device's performance grade, while FGG456 identifies the 456-ball surface-mount package and C identifies the commercial temperature grade.
The Spartan-3 architecture supports parallel programmable logic, dedicated block RAM, and dedicated 18×18-bit multipliers, allowing designs to combine control logic with buffering, packet handling, arithmetic, and DSP functions. A 456-ball BGA provides a high pin count in a relatively compact square package, making it appropriate for boards where the total I/O requirement cannot be accommodated by smaller plastic or leaded packages.
Typical uses include industrial control, communications infrastructure, instrumentation, test equipment, embedded signal processing, and legacy platform upgrades. The combination of 264 I/O and 8,064 logic cells is particularly useful for designs containing multiple parallel interfaces, control state machines, memory buffers, and multiplier-based arithmetic without requiring a larger FPGA family.
The primary PCB constraint is the 456-ball BGA land pattern. The board must provide the manufacturer's recommended power rails, decoupling, ball assignments, and escape routing, while component placement must support reliable solder assembly and inspection. Before starting a new design, verify the current toolchain and device support because the Spartan-3 generation predates newer development environments.
This page organizes the device's architectural, electrical, package, and sourcing information into an engineer-oriented selection guide. It also identifies package-compatible Spartan-3 alternatives and distinguishes direct footprint reuse from broader FPGA migrations that require design changes.
کے لیے ڈراپ اِن متبادل XC3S400-5FGG456C — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC3S400-5FGG456C (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package Type, Device Type, Logic Cells, System Gates, Package.
XC3S400-4FGG456C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC3S400-4FGG456I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC3S400-5FGG456I
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC3S400A-4FGG456C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC3S400-4FG456C
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC3S400-5FGG456C زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Spartan-3 field-programmable gate array (FPGA) |
| Logic Cells | 8,064 cells |
| System Gates | Approximately 400,000 gates |
| Performance Grade | -5 speed grade |
| Maximum Frequency | 725 MHz |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm |
| I/O Count | 264 I/O |
| پیکیج | 456-ball BGA (FGG456) |
| Package Type | Square surface-mount BGA |
| Terminal Type | Ball |
| Total Terminals | 456 balls |
| Temperature Grade | Commercial |
| Programmable Logic | 8,064 configurable logic cells |
XC3S400-5FGG456C square surface-mount bga پن کنفیگریشن گائیڈ
XC3S400-5FGG456C (square surface-mount bga پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC3S400-5FGG456C.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC3S400-5FGG456C کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control Systems, Communications Interface Consolidation, Test and Measurement Instrumentation, Embedded Signal Processing, Data Acquisition and Buffering, Legacy Platform Upgrade.
Industrial Control Systems
The XC3S400-5FGG456C fits industrial controllers that combine parallel I/O, sequential control logic, and dedicated arithmetic in one programmable device. Its 264 I/O can accommodate digital sensors, actuators, communication transceivers, and machine-control signals, while the 8,064 logic cells provide space for state machines, interlocks, timers, and protocol handling. The 1.2 V core supply and 90 nm Spartan-3 architecture support established industrial-control architectures. Designers should use the AMD FGG456 package guidance for power distribution and signal escape routing. Because the C suffix denotes the commercial grade, the selected component must satisfy the enclosure's actual temperature range.
تجویز کردہ
Communications Interface Consolidation
The XC3S400-5FGG456C is useful in communications equipment where multiple parallel interfaces and protocol engines must be consolidated into a single FPGA. Its 264 I/O provides substantial board-level connectivity, while 8,064 logic cells can implement framing, byte alignment, buffering, flow control, and error handling. Dedicated multipliers and block RAM are valuable for payload processing and data buffering without requiring numerous external components. The -5 performance grade offers additional timing margin over lower-speed alternatives in a design that is already timing constrained. Engineers should confirm configuration and clocking requirements against the selected Spartan-3 bitstream and board-level interface standards.
تجویز کردہ
Test and Measurement Instrumentation
The XC3S400-5FGG456C can serve as the digital control core in a test or measurement instrument that must combine acquisition logic, timing generation, trigger handling, and a user interface. The 264 I/O provide connections to converters, sensors, status indicators, and front-panel controls, while programmable logic supports counters, sequencers, and calibration functions. Its 8,064 logic cells and dedicated arithmetic resources are suitable for moderate-speed data conditioning and embedded DSP. The 456-ball BGA keeps the interconnect density manageable in compact laboratory equipment, although high-speed analog and digital separation remains essential. Timing closure should be based on the actual instrument clocking scheme and external converter latencies.
تجویز کردہ
Embedded Signal Processing
The XC3S400-5FGG456C is appropriate for legacy embedded signal-processing nodes that combine filtering, waveform generation, digital conversion control, and communications. Its dedicated multipliers and block RAM allow arithmetic pipelines and sample buffering to coexist with control logic, reducing reliance on external CPLDs and memories. The 264-I/O interface supports parallel converters, clock distribution, and data exchange with surrounding processors. The -5 grade can provide useful timing margin for moderately demanding pipelines. Designers should map each multiplier, RAM block, clock domain, and I/O standard in the selected FPGA implementation, then verify power and temperature behavior in the intended enclosure.
تجویز کردہ
Data Acquisition and Buffering
The XC3S400-5FGG456C can collect parallel data streams, apply real-time transformations, and transfer buffered results to a host processor. Its 264 I/O support wide data buses and multiple chip-select or handshake signals, while 8,064 logic cells support acquisition state machines and data-format conversion. Block RAM is suitable for staging data between acquisition and transmission stages, and dedicated multipliers can support fixed-point scaling operations. The -5 speed grade is advantageous when the pipeline must meet a tighter clock period than the -4 option. Engineers should analyze input timing, output latency, clock-domain crossings, and buffer depth before assigning the available FPGA resources.
تجویز کردہ
Legacy Platform Upgrade
The XC3S400-5FGG456C is relevant to maintenance and lifecycle-extension programs for existing Spartan-3 platforms. Its known 264-I/O, 456-ball package, and established Spartan-3 architecture allow an original board design to remain architecturally recognizable when exact procurement or assembly replacement is required. A same-package Spartan-3 variant may simplify hardware replacement when speed and temperature requirements allow it. Migration to Spartan-3A or a newer AMD family can add logic and memory resources, but it requires checking pin functions, configuration behavior, voltage requirements, toolchain compatibility, and timing. This device should therefore be treated as a controlled legacy procurement option rather than a default choice for new platforms.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC3S400-5FGG456C — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC3S400-4FGG456C | XC3S400-4FGG456I | XC3S400-5FGG456I | XC3S400A-4FGG456C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 456-ball BGA (FGG456) | 456-ball BGA (FGG456) | 456-ball BGA (FGG456) | 456-ball BGA (FGG456) | 456-ball BGA (FGG456) |
| FPGA Family | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3A |
| Performance Grade | -5 | -4 | -4 | -5 | -4 |
| Temperature Grade | Commercial | Commercial | Industrial | Industrial | Commercial |
اہم امتیازی خصوصیات
- Higher speed grade within the same Spartan-3 device family (بمقابلہXC3S400-4FGG456C)
- Commercial temperature ordering code for non-industrial-temperature applications (بمقابلہXC3S400-4FGG456I)
- Original Spartan-3 architecture with a direct same-speed package option (بمقابلہXC3S400-5FGG456I)
ڈیزائن نوٹس
Use the AMD FGG456 package drawing and pin-description tables as the authority for all 456 ball assignments. The high pin count requires deliberate escape routing, solid power distribution, and local decoupling. Keep sensitive clock and configuration paths away from noisy switching nodes, and review every dedicated power, ground, configuration, clock, and user-I/O ball rather than assigning connections solely by logical function.
Do not treat every XC3S400 ordering code as an automatic substitute. The -4 and -5 suffixes identify different speed grades, C and I identify different temperature grades, and Spartan-3A is a different family. For a replacement, verify the exact FGG456 land pattern, pin functions, supply voltage, configuration method, timing margin, resource utilization, and operating-temperature requirements before releasing the substitution to production.
Plan the FPGA power and clock network before placing external circuitry. Decoupling capacitors should be positioned close to the relevant supply balls, clock inputs should have short and symmetrically routed paths, and high-speed outputs should be considered when assigning adjacent I/O standards. Validate the final layer stack, return paths, BGA escape geometry, and assembly process against the manufacturer's reference design and simulation results.
تعمیل کی معلومات
The target uses an FGG456 ordering code, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the product information used for this record.