XC4VFX12-10SFG363C - Virtex-4 FX FPGA | AMD
MPN: XC4VFX12-10SFG363C ✗ اختتامِ زندگیXC4VFX12-10SFG363C جائزہ
A field-programmable gate array is a programmable logic semiconductor whose digital functions are defined through a configuration bitstream rather than fixed circuit wiring. Within the device hierarchy, this Virtex-4 FX device belongs to the FPGA and CPLD category of programmable-logic semiconductors. Its large logic capacity, high pin count, and embedded processing resources support designs requiring parallel data processing, specialized interfaces, and flexible hardware adaptation.
Key features include 12,312 logic cells, 1368 configurable logic blocks, 240 user I/O, and a 363-ball FCBGA package. The -10 designation identifies the device speed grade, while the commercial-temperature ordering code uses the C suffix. According to the Xilinx datasheet, the operating temperature range is 0°C to 85°C. The device is also identified as lead-free in component listings.
The 90 nm CMOS implementation places this device in AMD/Xilinx's established Virtex-4 generation. Its architecture combines programmable logic, block RAM, DSP-oriented arithmetic resources, and dedicated I/O capabilities. The 1028 MHz internal-frequency listing describes a headline device characteristic rather than a guarantee that every user interface or design will operate at that rate; practical performance depends on timing closure, resource utilization, clocking, I/O standards, and the selected design.
Typical applications include telecommunications and 5G infrastructure, industrial automation, medical imaging, aerospace and defense systems, test equipment, and research platforms. Its 240 I/O and high logic-cell count are useful for parallel datapaths and multi-channel control systems, while the large 363-contact package supports extensive power, ground, configuration, clock, and user-I/O connections.
PCB implementation requires careful power-plane distribution, decoupling, and ball-layout planning for the FCBGA package. Designers should use the manufacturer pinout and package information when assigning power, ground, configuration pins, and differential I/O. Signal-integrity analysis and appropriate multilayer stack-up are important because high-speed interfaces can be affected by return paths, supply noise, and skew between external devices.
This product page combines exact ordering information, package and logic characteristics, supported drop-in alternatives, comparison parameters, and practical implementation guidance. It is intended to accelerate engineering review, sourcing, PCB planning, and legacy-design maintenance for the XC4VFX12-10SFG363C.
کے لیے ڈراپ اِن متبادل XC4VFX12-10SFG363C — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC4VFX12-10SFG363C (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Internal Frequency, Operating Temperature, Process Technology, Speed Grade.
XC4VFX12-10SFG363I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC4VFX12-11SFG363C
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC4VFX12-11SFG363I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC4VFX12-10SF363C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC4VFX12-10SF363I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC4VFX12-10SFG363C زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Programmable Logic Cells | 12,312 cells |
| Configurable Logic Blocks | 1368 CLBs |
| User I/O | 240 I/O |
| Package Pin Count | 363 pins |
| Internal Frequency | 1028 MHz |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm CMOS |
| Minimum Operating Temperature | 0 °C |
| Maximum Operating Temperature | 85 °C |
| Speed Grade | -10 |
| Device Family | Virtex-4 FX |
| Programmable Logic Type | FPGA |
| Package Type | 363-pin FCBGA |
| Package Form | Square FCBGA |
| Terminal Type | BGA ball |
| Lead-Free Status | Pb-free |
| Product Lifecycle | Obsolete; family no longer in production |
XC4VFX12-10SFG363C square fcbga پن کنفیگریشن گائیڈ
XC4VFX12-10SFG363C (square fcbga پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC4VFX12-10SFG363C.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC4VFX12-10SFG363C کے لیے موزوں ہے 6 ایپلیکیشنs: Telecommunications and 5G Infrastructure, Industrial Automation and Control, Medical Imaging and Diagnostic Equipment, Aerospace and Defense Systems, Test and Measurement Equipment, Aerospace Research and Instrumentation.
Telecommunications and 5G Infrastructure
The XC4VFX12-10SFG363C fits legacy telecommunications equipment that requires deterministic parallel processing and substantial pin connectivity. Its 12,312 programmable logic cells and 1368 configurable logic blocks can implement protocol state machines, packet routing, test paths, and fixed-function accelerator logic, while 240 user I/O support multiple board-level interfaces. The 90 nm CMOS device operates from a 1.2 V core supply and uses a 363-pin FCBGA package. Designers should preserve its established clocking and configuration architecture, verify signal integrity at each interface, and confirm that the 0°C to 85°C range matches the installed equipment enclosure.
تجویز کردہ
Industrial Automation and Control
The XC4VFX12-10SFG363C is useful in industrial automation systems that combine multiple control channels with protocol conversion or timing-critical logic. Its 240 user I/O can accommodate digital machine interfaces, while the 12,312 logic cells and 1368 CLBs provide room for motion sequencing, interlocks, counters, and communication bridges. The -10 speed grade and 1.2 V core supply align with the established Virtex-4 platform. For factory equipment, validate timing margins, I/O standards, clock jitter, and thermal performance across the full operating environment. The commercial 0°C to 85°C rating is suitable for controlled enclosures but not every unheated industrial location.
تجویز کردہ
Medical Imaging and Diagnostic Equipment
The XC4VFX12-10SFG363C can support the parallel data acquisition, control, and image-processing functions found in legacy medical-imaging equipment. The FPGA's 12,312 programmable cells and 240 user I/O allow sensor interfaces, preprocessing pipelines, and control functions to be consolidated in one programmable device. Its listed 1028 MHz internal-frequency characteristic establishes a useful design reference, although actual interface rates depend on the implemented logic, I/O standards, and timing closure. Medical applications should follow the equipment's validated configuration, isolation, safety, and change-control procedures. Because this version is specified for 0°C to 85°C, environmental monitoring is required where clinical equipment operates near heat sources.
تجویز کردہ
Aerospace and Defense Systems
The XC4VFX12-10SFG363C is relevant to legacy aerospace, defense, test, and mission-system platforms whose verified designs depend on the exact Virtex-4 FX configuration. Its 240 user I/O and 12,312 logic cells suit channelized signal acquisition, interface conversion, embedded control, and test-equipment logic, while the 363-pin FCBGA provides extensive power and I/O connectivity. Qualification, radiation effects, temperature grade, configuration control, and obsolescence mitigation must follow the program-specific requirements rather than generic device availability. The XC4VFX12-10SFG363I may be mechanically compatible, but its industrial rating does not by itself establish aerospace or defense qualification.
تجویز کردہ
Test and Measurement Equipment
The XC4VFX12-10SFG363C suits programmable test systems requiring several synchronized channels, acquisition logic, pattern generation, and real-time control. The 1368 configurable logic blocks and 240 user I/O can divide resources among measurement channels, trigger logic, protocol engines, and data-capture paths, all within one 90 nm CMOS FPGA. Its listed 1028 MHz internal frequency can support demanding timing designs, but each clock domain still requires constraint-based timing analysis. Use the manufacturer ball map to separate supplies, configuration pins, clock inputs, and high-speed interfaces, and validate the final multilayer PCB for return-path continuity, skew, and power-supply noise.
تجویز کردہ
Aerospace Research and Instrumentation
The XC4VFX12-10SFG363C can be used in research instrumentation, data-acquisition platforms, and specialized control prototypes that need adaptable hardware without changing a fixed ASIC design. Programmable logic can implement multiple acquisition channels, trigger sequencing, data packing, and experiment-specific control functions, with 12,312 cells and 240 user I/O available for parallel work. The 363-pin FCBGA requires careful escape routing and a stable 1.2 V supply, while the -10 speed grade provides a defined timing class for reproducible lab designs. For long-lived programs, request lifecycle and sourcing information for the exact suffix and preserve a documented configuration archive and board revision history.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC4VFX12-10SFG363C — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC4VFX12-10SFG363I | XC4VFX12-11SFG363C | XC4VFX12-11SFG363I | XC4VFX12-10SF363C | XC4VFX12-10SF363I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 363-pin FCBGA | 363-pin FCBGA - same | 363-pin FCBGA - same | 363-pin FCBGA - same | 363-pin FCBGA - same | 363-pin FCBGA - same |
| Programmable Logic Cells | 12,312 cells | 12,312 cells | 12,312 cells | 12,312 cells | 12,312 cells | 12,312 cells |
| User I/O | 240 I/O | 240 I/O | 240 I/O | 240 I/O | 240 I/O | 240 I/O |
| Speed Grade | -10 | -10 | -11 | -11 | -10 | -10 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
اہم امتیازی خصوصیات
- Exact -10 commercial-temperature ordering option (بمقابلہXC4VFX12-10SFG363I)
- Commercial-temperature qualification profile (بمقابلہXC4VFX12-11SFG363I)
- Pin-compatible capacity consistency (بمقابلہXC4VFX12-11SFG363C)
- Drop-in configuration family continuity (بمقابلہXC4VFX12-10SF363C)
ڈیزائن نوٹس
Follow the manufacturer power-plane and decoupling guidance for the XC4VFX12-10SFG363C's 90 nm CMOS core and 1.2 V supply. Place the required bypass capacitors at their specified power balls, provide a low-impedance ground reference, and separate sensitive clock and configuration routing from high-current return paths. Estimated: without the complete power-supply impedance and switching profile, a junction-temperature rise cannot be calculated reliably, so use the device power estimator and measured board behavior before setting operating limits.
Treat the 363-pin FCBGA as a high-density routing and escape-routing problem. Use the manufacturer ball map to reserve the correct power, ground, configuration, clock, and user-I/O balls, and preserve thermal-via requirements. Check lane-to-lane skew and provide continuous return paths for high-speed interfaces. A multilayer stack-up with controlled reference planes is preferable where interfaces require predictable impedance.
Re-run timing closure and signal-integrity verification for every proposed family alternative. The XC4VFX12-10SFG363I keeps the -10 speed grade but changes the operating-temperature range, while the -11 devices change the timing-performance class. Configuration startup, clock behavior, I/O standards, and board-level power delivery must be checked rather than assuming that identical package dimensions guarantee equivalent system behavior.
Do not treat all 363-ball Virtex-4 FX devices as interchangeable. Confirm the exact order code, speed grade, commercial or industrial temperature suffix, lead-free designation, package drawing, and supply conditions. Also verify that the replacement has the same configuration pin behavior and power requirements. For an obsolete exact MPN, archive the device configuration, board revision, approved-vendor list, and mechanical drawings so long-term maintenance remains reproducible.
تعمیل کی معلومات
The component is identified as Pb-free. No explicit RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 status was established for this exact ordering code.