XC4VFX40-10FFG1152I - 41,904-Cell Virtex-4 FX FPGA | AMD
MPN: XC4VFX40-10FFG1152I ✓ فعالXC4VFX40-10FFG1152I جائزہ
A field-programmable gate array is a semiconductor device whose digital logic is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable interconnect, block RAM, dedicated arithmetic resources, and I/O circuitry. This makes an FPGA suitable when hardware parallelism, reconfigurability, high-speed interfaces, or rapid design revisions are more valuable than the simplicity of a fixed-function microcontroller.
The Virtex-4 FX architecture provides 4,656 configurable logic blocks and 41,904 logic cells in the XC4VFX40 device. Its listed 448 I/O positions support interfaces to external memory, networking equipment, industrial control systems, test equipment, and communications infrastructure. The -10 designation identifies the device speed grade, while the I temperature suffix denotes its 0°C to 85°C operating range.
The device uses CMOS technology and is manufactured in a 1152-position FCBGA package. The package exposes a large number of balls for power distribution, configuration access, dedicated I/O, and programmable user I/O. With 1152 package balls and hundreds of user I/O, board design must address high pin count, multilayer interconnect, via density, power-plane geometry, and BGA assembly capability.
Typical uses include network packet processing, industrial automation, high-speed test systems, signal processing, embedded control, and communication infrastructure. Its 41,904-cell capacity allows parallel datapaths and multiple logic functions to coexist in one device, while programmable I/O supports flexible external connectivity. Resource utilization, pin constraints, and timing closure remain the principal implementation limits.
For a new Virtex-4 design, confirm device-to-device migration rules, configuration memory requirements, supported I/O standards, and PCB equivalence before replacing an existing XC4VFX40. A mechanical footprint match alone does not establish compatibility if speed grade, temperature grade, configuration interface, or performance-resource limits differ. The manufacturer family overview should be used for migration and design guidance.
This page combines exact device identification, package and resource facts, practical BGA design guidance, and qualified same-package migration options. It is intended to help engineers distinguish genuine physical drop-in choices from larger FPGAs that require a different footprint or a redesigned board.
کے لیے ڈراپ اِن متبادل XC4VFX40-10FFG1152I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC4VFX40-10FFG1152I (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Logic Cells, Package, Package Type, Operating Temperature, Speed Grade.
XC4VFX40-10FF1152I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC4VFX40-11FF1152I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC4VFX40-10FFG1152I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Virtex-4 FX field-programmable gate array (FPGA) |
| Logic Cells | 41,904 cells |
| Configurable Logic Blocks | 4,656 CLBs |
| User I/O | 448 I/O |
| Internal Frequency Rating | 1028 MHz |
| Process Technology | 90 nm CMOS |
| Speed Grade | -10 |
| سپلائی وولٹیج | 1.2 V |
| پیکیج | 1152-ball FCBGA |
| Package Ball Count | 1152 balls |
| Package Type | 1152-BBGA, FCBGA |
| آپریٹنگ درجہ حرارت | 0°C to 85°C |
| Terminal Type | Ball |
| Package Shape | Square |
| Peak Reflow Temperature | 245°C |
| RoHS اسٹیٹس | RoHS3 compliant |
| لائف سائیکل کی حالت | Active |
| Minimum Order Quantity | 1 unit |
| Manufacturer | AMD |
| Product Family | Virtex-4 FX |
| Packaging Format | Tray |
XC4VFX40-10FFG1152I square پن کنفیگریشن گائیڈ
XC4VFX40-10FFG1152I (square پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC4VFX40-10FFG1152I.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC4VFX40-10FFG1152I کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Automation and Control, Network Packet Processing, High-Speed Test and Measurement, Communications Infrastructure, Signal and Image Processing, Aerospace and Defense Prototyping.
Industrial Automation and Control
XC4VFX40-10FFG1152I fits industrial controllers that combine machine sequencing, safety-adjacent monitoring, communications, and local data processing in one programmable device. Its 41,904 logic cells and 4,656 configurable logic blocks provide substantial parallel processing capacity, while 448 user I/O positions allow connection to sensors, actuators, motor-control interfaces, and field buses. The 0°C to 85°C grade covers common indoor industrial environments, although enclosure temperature and airflow still determine actual junction behavior. A practical design uses dedicated clocking, isolated external interfaces, and carefully planned power distribution for the 1152-ball FCBGA. The key benefit is reconfigurable hardware integration: control algorithms can be revised without changing the PCB, although timing closure must include the selected -10 speed grade rather than relying on nominal device frequency.
تجویز کردہ
Network Packet Processing
XC4VFX40-10FFG1152I is suitable for network appliances that need parallel header parsing, classification, buffering, and traffic-control logic. The 41,904 logic cells allow multiple packet-processing pipelines to operate concurrently, and the large I/O count supports high-speed parallel data paths when board-level transceivers are used. Its 1028 MHz listed internal frequency provides a useful device-level reference, but usable line rate still depends on I/O standards, clocking, routing, and timing closure. Implementations commonly partition the fabric among receive, search, queue, and transmit functions. The -10 grade should be evaluated against the design’s clock-margin targets, and the 1152-ball package requires a multilayer PCB with careful power and ground-plane distribution. Compared with a microcontroller approach, the FPGA supports deterministic parallel throughput and deeper protocol customization.
تجویز کردہ
High-Speed Test and Measurement
XC4VFX40-10FFG1152I can implement parallel acquisition, pattern generation, digital channel logic, and real-time analysis in an FPGA-based instrument. Its 4,656 configurable logic blocks allow multiple test channels and control paths to share one device, while 448 I/O positions support wide parallel buses and synchronization interfaces. The listed 1028 MHz internal rating enables high-rate digital state machines, although instrument performance must be derived from implemented pipelines and external memory bandwidth. A typical design separates acquisition, triggering, processing, and data-transfer blocks and then verifies them against the -10 speed-grade timing data. The 1152-ball FCBGA also makes thermal design and high-speed routing central concerns because every functional interface and supply domain must be assigned across the dense package. The architecture favors upgradeability and test parallelism over simple fixed sequencing.
تجویز کردہ
Communications Infrastructure
XC4VFX40-10FFG1152I supports communications equipment requiring configurable protocol handling, channel aggregation, and hardware-assisted control. The device’s 41,904 logic cells allow multiple data paths to operate in parallel, while its extensive I/O supports external memory, transceivers, and backplane interfaces. Engineers can partition the fabric into fixed-function blocks and adaptive modules without relying on a separate processor for every protocol operation. Performance depends on selected I/O standards, memory interfaces, and timing margins, so the -10 speed grade and 0°C to 85°C range should be reviewed against deployment conditions. The 1152-ball package provides substantial interconnect flexibility but demands via-in-pad or dense via strategies, controlled impedance, and careful layer transitions. Its main advantage is long product-tail flexibility for legacy or evolving communication interfaces.
تجویز کردہ
Signal and Image Processing
XC4VFX40-10FFG1152I is appropriate for parallel signal-processing chains where filters, transforms, correlation, and data movement benefit from FPGA implementation. The 41,904 logic cells and 4,656 configurable logic blocks provide enough parallel capacity for multiple arithmetic pipelines, while the large I/O count supports high-speed source interfaces and external memory. A practical architecture maps each processing stage to a separate clock domain or pipeline and connects stages through registers or block memory to control latency. The device’s 1028 MHz listed internal frequency is a device rating, not a guaranteed output sample rate; actual throughput depends on architecture, I/O standards, and timing closure. The -10 grade should be selected only after confirming timing margins at the required temperature. Its programmable architecture allows algorithm updates without PCB changes, making it useful for evolving DSP and image-processing requirements.
تجویز کردہ
Aerospace and Defense Prototyping
XC4VFX40-10FFG1152I can support legacy aerospace and defense prototyping systems where programmable logic is required for interfaces, sequencing, and mission-specific processing. Its 41,904 logic cells and 448 user I/O positions provide substantial configurable capacity, while the Virtex-4 FX family supports integration of logic, memory, and dedicated processing resources. The I suffix specifies a 0°C to 85°C commercial-industrial temperature range, so it is not by itself a substitute for an explicitly aerospace-qualified part. System decisions must address radiation, shock, vibration, qualification, and environmental requirements through the broader program specification. In hardware, the 1152-ball FCBGA requires stable supplies, full return-path planning, and assembly processes capable of inspecting fine-pitch solder joints. The FPGA is most suitable where established Virtex-4 tooling and long-term product continuity outweigh modernization requirements.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC4VFX40-10FFG1152I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC4VFX40-10FF1152I | XC4VFX40-11FF1152I |
|---|---|---|---|
| Brand | AMD | AMD | AMD |
| Package | 1152-ball FCBGA | 1152-ball FCBGA | 1152-ball FCBGA |
| Device Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Speed Grade | -10 | -10 | -11 |
| Temperature Grade | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C |
اہم امتیازی خصوصیات
- Matches the original speed grade for direct timing continuity (بمقابلہXC4VFX40-11FF1152I)
- Uses the largest identified 1152-ball same-family footprint (بمقابلہXC4VLX60-10FFG668I)
- Provides a higher-capacity FX resource configuration (بمقابلہXC4VLX25-10FFG676I)
ڈیزائن نوٹس
Design the PCB for the 1152-ball FCBGA rather than treating it as a generic BGA. Assign power, ground, configuration, clock, and user-I/O balls using the exact package pinout from AMD. Maintain uninterrupted power and ground planes, provide adequate layer transitions for high-speed nets, and plan escape routing from the dense ball array. Assembly drawings, solder-paste stencil apertures, and inspection coverage should be reviewed for the selected boardhouse process.
Use the manufacturer’s power-supply topology and decoupling recommendations for every voltage rail. The device is identified as a 1.2 V CMOS FPGA, but total rail current depends on the implemented logic, I/O activity, operating speed, and configuration state. Place bulk and local decoupling close to their associated supply balls, provide clean references for high-speed interfaces, and avoid routing noisy or switching-regulator return paths through sensitive FPGA power areas. Validate the final power budget with realistic utilization and I/O switching scenarios.
Estimate junction temperature from actual FPGA power dissipation rather than the headline clock rating. Start with a conservative utilization estimate, identify the dominant logic and I/O activity, obtain representative power numbers from the AMD power estimator or characterization data, and add PCB copper contribution under the intended airflow. Because the package has 1152 balls and substantial logic capacity, inadequate copper area or via density can turn an otherwise sound electrical design into a thermal failure.
Do not treat FCBGA ball count as sufficient proof of interchangeability. Verify the FF versus FFG ordering suffix, speed grade, temperature grade, configuration scheme, pin functions, and package drawing before migrating a PCB or released design. A replacement that uses the same 1152-ball grid can still differ in assembly attributes or timing. Confirm every migration with the AMD Virtex-4 family overview and device-specific pinout tables, then rerun synthesis, placement, timing, and power analysis.
تعمیل کی معلومات
The product is listed as RoHS3 compliant. No REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement is established by the cited product information.