XC7A50T-L1FTG256I - 52K Logic Cell Artix-7 FPGA | AMD
MPN: XC7A50T-L1FTG256I ✓ فعالXC7A50T-L1FTG256I جائزہ
An FPGA is a programmable semiconductor in the broader hierarchy of programmable logic devices and digital semiconductors. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnect, memory resources, and I/O into one device. After hardware configuration, these resources implement custom digital circuits and can be updated through a bitstream rather than requiring a change to the printed circuit board.
The XC7A50T provides a useful balance between logic density and package size. Its 52,160 logic cells support parallel datapaths and control architectures, while the 170 available I/O give a board designer substantial connectivity for external memory, converters, transceivers, clocks, and industrial interfaces. The 256-pin FTG256 package is substantially smaller than the higher-density Artix-7 options in larger FBGA packages, making the device relevant to compact embedded control and signal-processing equipment.
The -1 performance designation identifies the device's speed-grade family, while the FTG256 suffix identifies the package configuration and the trailing I identifies the industrial temperature option. The L1 ordering code is retained exactly as published for this device. Designers should use the AMD package pinout files and UG475 package documentation to assign every ball, power rail, configuration pin, and I/O signal before schematic capture or PCB layout.
Typical applications include industrial control, data acquisition, embedded vision interfaces, communications infrastructure, test equipment, and low-cost hardware accelerators. The FPGA fabric can parallelize filtering, packet handling, sensor fusion, or control loops, while block RAM and dedicated I/O paths support deterministic data movement. Exact RAM, DSP, I/O-standard, and timing resources should be selected against the target Vivado design rather than inferred from the logic-cell count alone.
A critical design consideration is power planning. Although the device operates from a 0.95 V core, its configuration and auxiliary rails have separate requirements, and dynamic power depends on the implemented logic, toggle rate, I/O activity, and temperature. Follow the AMD power-estimation methodology, decouple each supply group, and validate the complete power tree under worst-case clocking and I/O loading.
This page combines the exact ordering-code characteristics with package migration guidance, comparison parameters, sourcing information, and practical FPGA design guidance. It also distinguishes genuine pin-compatible Artix-7 options from variants that require a different package, speed grade, or board-level qualification before use.
کے لیے ڈراپ اِن متبادل XC7A50T-L1FTG256I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC7A50T-L1FTG256I (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Core Supply Voltage, Logic Cells, Package, Temperature Grade.
XC7A50T-1FTG256I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC7A50T-2FTG256I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC7A50T-L2FTG256I
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC7A100T-1FTG256I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7A200T-1FTG256I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC7A50T-L1FTG256I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | Artix-7 field-programmable gate array (FPGA) |
| Logic Cells | 52,160 cells |
| Programmable Logic Elements | 2,764,800 elements |
| User I/O Count | 170 I/O |
| Core Supply Voltage | 0.95 V |
| FPGA Process Technology | 28 nm |
| پیکیج | 256-pin FTG256 ball-grid-array package |
| Performance Grade | L1 |
| Temperature Grade | Industrial grade |
| Device Family | Artix-7 |
| Device Density | 50T |
| Programming Technology | Configuration-memory programmable FPGA |
XC7A50T-L1FTG256I 256-pin ftg256 ball-grid-array package پن کنفیگریشن گائیڈ
XC7A50T-L1FTG256I (256-pin ftg256 ball-grid-array package پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC7A50T-L1FTG256I.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC7A50T-L1FTG256I کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control and Automation, Data Acquisition and Signal Processing, Communications and Protocol Bridging, Embedded Vision Interface, Test and Measurement Equipment, Low-Cost Hardware Accelerator.
Industrial Control and Automation
The AMD XC7A50T-L1FTG256I fits compact industrial controllers because its 52,160 logic cells can implement multiple control loops, state machines, interlocks, and communication protocols in parallel. The 170 I/O provide connections for digital sensors, actuators, encoders, and discrete factory equipment while the 256-pin FTG256 package helps limit board area. Its 28 nm Artix-7 implementation also supports clocked logic and deterministic signal processing without a separate ASIC. During design, assign banks by voltage and ensure the controller's industrial I/O levels, isolation, and protection requirements are met. The FPGA can consolidate several peripheral functions, but timing closure, industrial environmental requirements, and the device's operating limits must be verified independently.
تجویز کردہ
Data Acquisition and Signal Processing
XC7A50T-L1FTG256I is suitable for parallel data-acquisition systems that need filtering, decimation, thresholding, or spectral processing close to the source. Its 52,160 logic cells can implement multiple concurrent processing channels, while 170 I/O support converters, clocks, memory interfaces, and synchronization signals. The 0.95 V core and 28 nm FPGA technology are appropriate for a modern custom acquisition board, although the exact converter interface, block RAM, and DSP capacity must be selected from the device resource tables. Engineers should budget acquisition clocks and I/O timing in Vivado, use registered interfaces where required, and test timing closure with realistic input activity before committing the configuration.
تجویز کردہ
Communications and Protocol Bridging
The AMD XC7A50T-L1FTG256I can act as a compact protocol-conversion or packet-processing engine for embedded communications equipment. The 52,160-cell fabric can support parallel framing, header parsing, checksums, buffering logic, and interface adaptation, while 170 I/O offer access to multiple low- and high-speed interfaces. Its relatively compact FTG256 package is useful where a larger Artix-7 BGA would be difficult to route. A practical design should isolate transmit and receive clock domains, constrain packet-memory interfaces, and verify supported I/O standards against the target family data. Because no transceiver specification is established for this part, high-speed serial links require separate PHY components or an appropriately specified companion device.
تجویز کردہ
Embedded Vision Interface
XC7A50T-L1FTG256I is useful in embedded vision systems that perform preprocessing before data is sent to a processor or network interface. Its programmable logic can execute pixel formatting, thresholding, line detection, region tagging, and data reduction in parallel, reducing the amount transferred across a wider system bus. The 170 I/O can support camera or sensor interfaces, while the 256-pin package provides a compact implementation option. Design work should account for the actual line rate, required data format, external memory bandwidth, and clock-domain crossings. The device is not a camera sensor, so image capture still requires suitable sensors and interface circuitry. Timing should be analyzed with the intended pixel clock, and any higher-density migration should be checked for thermal and timing effects.
تجویز کردہ
Test and Measurement Equipment
The AMD XC7A50T-L1FTG256I can implement the digital portion of a compact test system, including pattern generation, timing control, acquisition logic, trigger sequencing, and programmable counters. Its 52,160 logic cells allow multiple measurement channels to operate concurrently, and its 170 I/O can connect to external analog front ends, memory, and communication controllers. The 0.95 V core and small FTG256 package support compact instrument designs, but precision analog performance is determined by the surrounding circuitry. Engineers should define acquisition timing in a hardware constraints file, use CDC-safe clock crossing structures, and verify output-delay and input-timing margins. Resource utilization must also be checked in Vivado for the actual instrument configuration.
تجویز کردہ
Low-Cost Hardware Accelerator
XC7A50T-L1FTG256I offers a practical platform for FPGA-based accelerators because its 52,160 logic cells can host parallel filters, cryptographic pipelines, compression stages, or mathematical kernels. The 170 I/O allow accelerator data to be exchanged directly with host processors, memory, and test equipment, reducing development time compared with a full custom ASIC. The 28 nm device balances programmable flexibility with low system cost, although actual throughput is governed by memory bandwidth, clock frequency, and pipeline architecture rather than the logic-cell count alone. Designers should profile the critical path, infer DSP and RAM usage, and use vendor-provided architecture resources where applicable. A higher-density Artix-7 option may be preferable when parallel lanes exceed the 50T device's available resources.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC7A50T-L1FTG256I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC7A50T-1FTG256I | XC7A50T-2FTG256I | XC7A50T-L2FTG256I | XC7A100T-1FTG256I | XC7A200T-1FTG256I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 256-pin FTG256 BGA | 256-pin FTG256 BGA | 256-pin FTG256 BGA | 256-pin FTG256 BGA | 256-pin FTG256 BGA | 256-pin FTG256 BGA |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells | 101,440 cells | 215,360 cells |
| User I/O Count | 170 I/O | 170 I/O | 170 I/O | 170 I/O | 170 I/O | 170 I/O |
| Core Supply Voltage | 0.95 V | 0.95 V | 0.95 V | 0.95 V | 0.95 V | 0.95 V |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Ordering Designation | L1 | -1 | -2 | L2 | -1 | -1 |
| Temperature Suffix | I | I | I | I | I | I |
اہم امتیازی خصوصیات
- Mid-density Artix-7 resource balance (بمقابلہXC7A200T-1FTG256I)
- Same-density timing-grade comparison (بمقابلہXC7A50T-2FTG256I)
- Established FTG256 migration path (بمقابلہXC7A100T-1FTG256I)
ڈیزائن نوٹس
Build the power tree around the device's separate core, configuration, and auxiliary supplies rather than treating 0.95 V as the only rail requirement. Place the required decoupling capacitors directly beside their associated power and ground balls, follow the AMD reference power architecture, and verify the design with the manufacturer's power-estimation flow. Dynamic power changes with logic utilization, clocking, I/O activity, and temperature, so estimate worst-case power after synthesis and implementation rather than using only average device data.
Use the FTG256-specific AMD package pinout file for schematic capture and ball assignment; do not derive the layout from a generic 256-ball BGA drawing. Follow the package escape-routing rules and power-plane guidance in UG475, including treatment of configuration pins and unused balls. Because the board contains a fine-pitch BGA, inspect the completed assembly for solder bridging and verify X-ray or cross-section workmanship on representative units before production.
Assign external interfaces to electrically compatible I/O banks and include the required series termination in the board design. Use Vivado constraints to define clock periods, input delays, output delays, and board-level timing exceptions, then rerun timing analysis after every major placement change. Treat clock-domain crossings explicitly with synchronization structures and keep high-fanout control nets from producing unpredictable routing congestion or timing degradation.
Avoid selecting a replacement solely because its package suffix is FTG256. Verify the device density, L or speed-grade designation, temperature suffix, configuration interface, power requirements, and supported I/O standards. When migrating from 50T to 100T or 200T, review power consumption, resource utilization, timing constraints, and bitstream compatibility. A package-compatible part can still require design changes if its performance grade or configuration behavior differs.
تعمیل کی معلومات
The exact ordering code is an industrial-temperature Artix-7 FPGA. Automotive qualification, RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations must be confirmed for the exact package and ordering code before use in regulated equipment.