XC7Z020-2CLG400I - Dual Cortex-A9 85K Zynq SoC | AMD
MPN: XC7Z020-2CLG400I ✗ اختتامِ زندگیXC7Z020-2CLG400I جائزہ
A Zynq-7000 system on chip belongs to the FPGA & CPLD and embedded processor-device hierarchy. Unlike a conventional microcontroller, which executes instructions entirely in software, the Zynq architecture allows control and data-processing code to run on the ARM Cortex-A9 MPCore processor while independent algorithms, interfaces, and accelerators execute in parallel within the Artix-7 programmable logic. This heterogeneous architecture provides software flexibility alongside hardware-level parallelism and deterministic control capability.
The XC7Z020 device provides 85K logic cells for FPGA fabric and a maximum listed processor frequency of 766 MHz. Its dual-core Cortex-A9 MPCore configuration supports concurrent processing, while CoreSight provides integrated debug and trace capabilities. The -2 design suffix identifies the device performance grade, while the I suffix identifies the industrial-temperature configuration. These ordering details are important when replacing another Zynq-7000 member on an existing board.
Technically, the device combines hard processor logic with programmable FPGA resources rather than implementing the ARM processor itself in soft logic. This division allows software to manage control flow, operating systems, communication stacks, or application logic while the FPGA fabric handles parallel datapaths, custom interfaces, video processing, or signal-processing pipelines. The fixed ARM subsystem and programmable fabric share access to memory and programmable I/O resources at the device level.
XC7Z020-2CLG400I is suitable for industrial embedded control, networked data acquisition, industrial Ethernet, machine vision, test and measurement, communications equipment, and custom accelerator systems. The 400-CSPBGA package supports compact designs requiring numerous high-density connections, although its fine pitch requires careful PCB layout, controlled impedance routing, dense decoupling, and manufacturing capability suited to advanced BGA assemblies.
Designers should select the CLG400 package outline and land pattern directly from the manufacturer package documentation, use the complete power, ground, decoupling, configuration, clock, and I/O requirements from the official device documentation, and validate signal integrity and manufacturing yield at the chosen BGA process capability. Device programming, security configuration, clocking, and reset behavior must also be verified for the target board before production release.
کے لیے ڈراپ اِن متبادل XC7Z020-2CLG400I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC7Z020-2CLG400I (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Device Type, Mounting Type, Performance Grade, Package Dimensions, FPGA Logic Cells.
XC7Z020-1CLG400I
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7Z020-2CLG400C
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC7Z020-2CLG400E
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7Z020-3CLG400E
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7Z020-3CLG400I
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC7Z020-2CLG400I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Zynq-7000 Artix-7 FPGA system on chip |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| Maximum Processor Frequency | 766 MHz |
| Programmable Logic Cells | 85K logic cells |
| Debug and Trace | CoreSight |
| FPGA Family | Artix-7 |
| Product Family | Zynq-7000 |
| Architecture | Zynq-7000 SoC with ARM Cortex-A9 MPCore and programmable FPGA logic |
| Performance Grade | -2 |
| Temperature Grade | Industrial |
| Package Type | 400-CSPBGA |
| Package Dimensions | 17 mm x 17 mm |
| پن کی تعداد | 400 pins |
XC7Z020-2CLG400I 17 mm x 17 mm پن کنفیگریشن گائیڈ
XC7Z020-2CLG400I (17 mm x 17 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC7Z020-2CLG400I.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC7Z020-2CLG400I کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control and Automation, Industrial Networking Gateway, Machine Vision and Image Processing, Data Acquisition and Test Equipment, Communications and Signal Processing, Embedded Security and Access Control.
Industrial Control and Automation
The XC7Z020-2CLG400I fits industrial controllers that need both deterministic programmable logic and a dual-core ARM Cortex-A9 processor. The 85K logic cells can implement parallel control loops, encoder interfaces, or hardware state machines, while the 766 MHz ARM subsystem executes communications, supervisory logic, and diagnostics. Its industrial-temperature ordering identifies it for industrial environments, although the exact temperature envelope must be checked before deployment. A typical implementation assigns time-critical I/O and sampling functions to FPGA fabric and leaves operating-system, networking, and configuration management to the processor side.
تجویز کردہ
Industrial Networking Gateway
XC7Z020-2CLG400I is suitable for protocol-conversion and industrial Ethernet gateway products that divide work between programmable logic and embedded software. ARM cores can run network stacks, management services, and secure control-plane functions, while the 85K logic cells accelerate packet classification, framing, data movement, or custom interfaces. The 766 MHz listed processor frequency supports a meaningful software-processing workload, but exact Ethernet MAC and PHY interfaces depend on the board design. Designers should verify clocking, memory topology, and I/O assignment in the manufacturer package and design documentation.
تجویز کردہ
Machine Vision and Image Processing
The XC7Z020-2CLG400I can divide a machine-vision system between parallel FPGA pipelines and higher-level ARM processing. Programmable logic is well suited to pixel acquisition, thresholding, filtering, and fixed-format data movement, while the dual Cortex-A9 cores handle control, classification, diagnostics, and host communication. With 85K logic cells, the device supports compact parallel-processing systems rather than the largest image pipelines. Camera interface timing, external memory behavior, and connector pin assignments should be validated against the selected image sensor and board constraints.
تجویز کردہ
Data Acquisition and Test Equipment
XC7Z020-2CLG400I is well matched to data-acquisition instruments where deterministic sampling must coexist with embedded control and analysis software. The FPGA fabric can implement parallel ADC interfaces, timing generation, digital filtering, and trigger logic, while the dual ARM Cortex-A9 subsystem executes calibration, sequencing, data processing, and user-interface tasks. Its 766 MHz listed frequency supports control-plane computation, and 85K logic cells provide a practical logic budget for moderate channel counts. Exact converter rates, memory bandwidth, and timing margins must be established from the complete design documentation.
تجویز کردہ
Communications and Signal Processing
The XC7Z020-2CLG400I supports communications equipment in which filtering, modulation, buffering, or interface logic must operate concurrently with embedded protocol processing. The 85K programmable logic cells allow parallel datapaths to be implemented in hardware, and the dual Cortex-A9 MPCore subsystem can manage control flow, configuration, and higher-level protocols. This division can reduce pressure on the processor compared with a software-only implementation. Designers should determine throughput and latency from the selected FPGA architecture and then verify external memory, transceiver, and clock requirements against the target board.
تجویز کردہ
Embedded Security and Access Control
XC7Z020-2CLG400I can serve as the processing foundation for an embedded security appliance or access-control terminal that benefits from hardware-assisted parallelism. The ARM cores can execute operating-system services, authentication workflows, cryptography, and network handling, while programmable logic accelerates packet inspection, secure key-path logic, or peripheral offload. The 400-CSPBGA package offers many connections for external memory and networking, but it also demands advanced PCB assembly capability. Designers must also implement device-programming, startup, tamper-response, and key-storage practices appropriate to the product's security architecture.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC7Z020-2CLG400I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC7Z020-1CLG400I | XC7Z020-2CLG400C | XC7Z020-2CLG400E | XC7Z020-3CLG400E | XC7Z020-3CLG400I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 400-CSPBGA, 17 mm x 17 mm | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA |
| Device Type | Zynq-7000 Artix-7 FPGA SoC | Zynq-7000 Artix-7 FPGA SoC | Zynq-7000 Artix-7 FPGA SoC | Zynq-7000 Artix-7 FPGA SoC | Zynq-7000 Artix-7 FPGA SoC | Zynq-7000 Artix-7 FPGA SoC |
| Programmable Logic Cells | 85K logic cells | 85K logic cells | 85K logic cells | 85K logic cells | 85K logic cells | 85K logic cells |
| Processor Core | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Performance Grade | -2 | -1 | -2 | -2 | -3 | -3 |
| Temperature Classification | Industrial | Industrial | Commercial | Extended commercial | Extended commercial | Industrial |
| Debug and Trace | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
| Price Tier | Request a quote | Request a quote | Request a quote | Request a quote | Request a quote | Request a quote |
اہم امتیازی خصوصیات
- Higher listed processor frequency than the -1 grade (بمقابلہXC7Z020-1CLG400I)
- Industrial-temperature ordering option (بمقابلہXC7Z020-2CLG400C)
- Lower speed grade than the -3 alternative (بمقابلہXC7Z020-3CLG400E)
- Combines an ARM processor system with 85K logic cells (بمقابلہM2GL050-1VF400)
ڈیزائن نوٹس
Use the official CLG400 package files to create the ball map, solder mask, paste stencil, and PCB land pattern. A generic 400-BGA drawing is insufficient because pad diameter, ball pitch, power-ball assignments, and thermal construction are package-specific. Validate clearances for assembled height, test access, and rework, and confirm the selected board manufacturer can support the package pitch and ball count before releasing the mechanical design.
Plan the power tree directly from the manufacturer power, ground, decoupling, and sequencing requirements. Place decoupling capacitance at the associated device power balls with the shortest possible current paths, maintain the recommended separation between sensitive and noisy supply paths, and use the specified test points for bring-up. Do not infer rail limits, tolerance, startup order, or bypass values from generic Zynq-7000 designs without checking the exact device documentation.
Route clocks and high-speed memory or interface signals as controlled-impedance nets, with continuous reference planes and topology that matches the selected FPGA IP or memory interface. Keep configuration, reset, clock, and JTAG debugging paths accessible for production test. Because the package contains 400 contacts in a 17 mm by 17 mm outline, escape routing, layer transitions, and via requirements should be reviewed with the PCB stack-up before placement of supporting components.
Do not substitute CLG484, CLG900, or other package variants even when the XC7Z020 device name is identical. Also check the speed-grade suffix and temperature suffix: -1, -2, and -3 are not equivalent ordering options, and the I suffix identifies the industrial version. Before substitution, compare the manufacturer package files, electrical characteristics, supported operating range, design tools, bitstream compatibility, and product qualification requirements.
Estimate total board temperature rise from actual processor and FPGA utilization, memory activity, ambient temperature, copper area, airflow, and the package thermal model in the manufacturer documentation. Do not use the maximum logic-cell count as a power estimate. Validate the design across processor-only, logic-heavy, memory-heavy, and worst-case I/O states because workload allocation across the ARM subsystem and programmable fabric can materially change board temperature.
تعمیل کی معلومات
The industrial-temperature suffix does not establish AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current AMD compliance documentation.