XC7Z035-1FFG676C - 667MHz Dual Cortex-A9 SoC FPGA | AMD
MPN: XC7Z035-1FFG676C ✓ فعالXC7Z035-1FFG676C جائزہ
A Zynq-7000 SoC belongs to the system-on-chip family, combining a hard microcontroller subsystem with programmable FPGA logic. This integration removes the need to place a separate processor and FPGA on the same board, while preserving software programmability through the Arm Cortex-A9 platform and hardware customization through Kintex-7 FPGA resources. The resulting architecture can accelerate data movement, filtering, encryption, image processing, and interface conversion without relying exclusively on sequential software execution.
Key characteristics of the XC7Z035 include two Cortex-A9 processor cores, 667 MHz clocking, 275K logic cells, and support for CoreSight-based debug and trace visibility. The -1 device designation identifies the associated speed grade within the Zynq-7000 ordering system. The FFG676 designation identifies the 676-ball FCBGA package used by this ordering variant, with a stated package size of 27 x 27 mm.
The programmable architecture makes this device suitable for industrial control, machine vision, network appliances, test equipment, communications infrastructure, and embedded edge systems. Designers can allocate deterministic tasks to FPGA logic while the operating system executes higher-level control, networking, or user-interface functions on the processor subsystem. Peripheral interfaces can therefore be implemented with predictable timing rather than depending entirely on interrupt-driven software servicing.
Board design requires careful allocation of power, ground, high-speed transceiver, clocking, and processor debug resources. Use the AMD package-placement diagrams and Zynq-7000 data sheet to assign every ball before routing PCB traces. The 676-ball package also demands a fine-pitch PCB layout with controlled impedance and appropriate power-delivery networks.
Selection should begin with the required processor software image, FPGA utilization, transceiver count, peripheral mix, operating temperature, and lifecycle expectations. Confirm that the chosen ordering variant satisfies all mechanical, electrical, and software requirements before committing the footprint. This page combines verified ordering details, package information, practical design guidance, and a structured comparison of same-family alternatives.
کے لیے ڈراپ اِن متبادل XC7Z035-1FFG676C — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC7Z035-1FFG676C (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Device Type, Package, Mounting Type, FPGA Logic Cells, Processor Core.
XC7Z035-1FBG676C
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7Z035-1FFG676I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7Z035-1FBG676I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7Z035-2FFG676I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7Z035-2FBG676I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7Z035-L2FFG676I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC7Z035-3FFG676E
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC7Z035-1FFG676C زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Zynq-7000 Kintex-7 system-on-chip |
| Processor Core | Dual Arm Cortex-A9 MPCore |
| Processor Clock | 667 MHz |
| FPGA Logic Cells | 275K |
| Programmable Logic Family | Kintex-7 |
| Debug Support | CoreSight |
| پیکیج | 676-ball FCBGA, 27 x 27 mm |
| Package Ball Count | 676 |
| ماؤنٹنگ ٹائپ | Surface mount |
| Device Designation | -1 speed grade |
| SoC Architecture | Zynq-7000 first-generation architecture |
| CPU Architecture | Arm Cortex-A9 |
| Number of CPU Cores | 2 |
| Programmable Logic Type | FPGA |
XC7Z035-1FFG676C 676 پن کنفیگریشن گائیڈ
XC7Z035-1FFG676C (676 پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC7Z035-1FFG676C.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC7Z035-1FFG676C کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Machine Vision, Industrial Control and Automation, Network Acceleration and Appliances, Test and Measurement Equipment, Secure Communications and Encryption, High-Performance Embedded Edge Processing.
Industrial Machine Vision
The XC7Z035-1FFG676C suits machine-vision controllers that combine camera acquisition with real-time classification or inspection. Its 275K Kintex-7 logic cells can implement parallel pixel pipelines, thresholding, filtering, and interface conversion, while the dual Cortex-A9 cores at 667 MHz can manage the operating system, camera control, and result handling. Partitioning the image path into FPGA logic reduces latency and avoids passing every pixel through the processor. The 676-ball FCBGA requires a fine-pitch multilayer PCB, but it consolidates the processor, control logic, and high-speed interface fabric into one programmable component. Validate camera interface timing, memory bandwidth, and thermal rise at the expected frame rate before finalizing the implementation.
تجویز کردہ
Industrial Control and Automation
The XC7Z035-1FFG676C is appropriate for factory controllers that require deterministic I/O timing alongside a programmable embedded software layer. The two 667 MHz Arm Cortex-A9 cores can run control logic, communications, and supervisory software, while Kintex-7 logic can implement precise pulse generation, encoder processing, safety interlocks, or high-speed acquisition. The integrated architecture reduces board area and shortens communication paths between control software and hardware logic. Designers should partition resources according to expected task timing, preserve deterministic paths in programmable logic, and isolate the processor subsystem from time-critical functions. The 27 x 27 mm FCBGA footprint demands careful power distribution and thermal planning in compact industrial enclosures.
تجویز کردہ
Network Acceleration and Appliances
The XC7Z035-1FFG676C can serve as the central programmable element in a network appliance that requires both packet-oriented software and hardware data-path acceleration. Its 667 MHz dual-core Arm subsystem can handle control planes, management interfaces, and protocol stacks, while the 275K logic cells can implement packet classification, queues, checksums, or encryption pipelines. This division of labor supports high throughput without forcing every operation through the processor. A production design should use AMD reference designs to guide transceiver, clock, and memory connectivity, and should verify that the selected board supports the required transceiver population and I/O rates. Software images, device-tree definitions, and boot media must also match the exact ordering variant.
تجویز کردہ
Test and Measurement Equipment
The XC7Z035-1FFG676C fits test and measurement equipment that combines a rich embedded interface with deterministic acquisition and stimulus logic. The dual Cortex-A9 subsystem can run the instrument application, remote-control software, and data analysis, while FPGA logic can implement waveform capture, trigger sequencing, protocol generation, or calibration tables. This arrangement allows the instrument to present a conventional processor-based user interface while keeping time-sensitive operations deterministic. The fine-pitch BGA package also supports dense board construction, although decoupling, clock distribution, and analog isolation require careful planning. Use the AMD clocking and memory-interface guidance as a baseline, and verify timing closure with the final Vivado implementation rather than relying on block-level estimates.
تجویز کردہ
Secure Communications and Encryption
The XC7Z035-1FFG676C can accelerate security-intensive communications by placing encryption, authentication, or compression pipelines in FPGA logic while the Arm cores manage sessions and protocols. The 275K logic cells and dual 667 MHz Cortex-A9 cores allow parallel hardware to coexist with a conventional software control path. This is especially useful when throughput must be sustained without adding a separate accelerator board. The implementation must account for key handling, side-channel considerations, boot security, and correct partitioning between trusted software and programmable logic. Before production use, validate the security features supported by the exact device and software environment against AMD security documentation rather than assuming that programmable logic alone provides complete system assurance.
تجویز کردہ
High-Performance Embedded Edge Processing
The XC7Z035-1FFG676C is a strong candidate for edge systems that need Linux-class software flexibility alongside real-time hardware processing. The two 667 MHz Cortex-A9 cores can execute networking, storage management, and application workloads, while Kintex-7 logic can service sensors, pre-process data, or reduce the processor load. Deployments involving multiple sensor streams benefit from deterministic acquisition blocks and parallel filtering close to the interface. The design must provide suitable memory, power regulation, storage, and connectivity in addition to the SoC itself. Thermal performance is especially important because sustained logic utilization can raise junction temperature in compact enclosures, so calculate worst-case activity and provide thermal paths in the PCB stack-up.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC7Z035-1FFG676C — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC7Z035-1FBG676C | XC7Z035-1FFG676I | XC7Z035-1FBG676I | XC7Z035-2FFG676I | XC7Z035-2FBG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FCBGA (27 x 27 mm) | 676-ball FCBGA (27 x 27 mm) | 676-ball FCBGA (27 x 27 mm) | 676-ball FCBGA (27 x 27 mm) | 676-ball FCBGA (27 x 27 mm) | 676-ball FCBGA (27 x 27 mm) |
| Processor Cores | Dual Arm Cortex-A9 | Dual Arm Cortex-A9 | Dual Arm Cortex-A9 | Dual Arm Cortex-A9 | Dual Arm Cortex-A9 | Dual Arm Cortex-A9 |
| Processor Clock | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 800 MHz | 800 MHz |
| FPGA Logic Cells | 275K | 275K | 275K | 275K | 275K | 275K |
| Programmable Logic | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Speed Designation | -1 | -1 | -1 | -1 | -2 | -2 |
| Ordering Suffix | FFG676C | FBG676C | FFG676I | FBG676I | FFG676I | FBG676I |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
اہم امتیازی خصوصیات
- Integrated processor and programmable-logic architecture (بمقابلہM2GL090T-FGG676)
- Higher processor clock than the -1 alternatives (بمقابلہXC7Z035-1FBG676C)
- Faster processor grade is available in the same family (بمقابلہXC7Z035-2FFG676I)
- Large integrated logic and processing resource base (بمقابلہM2GL060T-FG676)
ڈیزائن نوٹس
Use the AMD XC7Z35 FBG676 and FFG676 package-placement diagrams to generate the footprint and schematic symbol. Do not assume that two 676-ball orderings have identical ball functions even when their package dimensions match. Verify power, ground, configuration, clock, memory, transceiver, and processor-debug assignments directly against the ordering tables. Route all supply and ground balls with the reference-stackup geometry and provide local bulk and high-frequency decoupling at every supply entry point.
Power sequencing and rail dependencies must follow the AMD Zynq-7000 power-supply design guidance. Separate processor, FPGA, memory, and I/O supplies into appropriately filtered regulator stages, and confirm voltage, current, ramp, and sequencing requirements for the selected configuration. Estimated: processor and programmable-logic utilization determine dynamic current, but the actual rail budget cannot be calculated without the clock rate, resource utilization, I/O state, and vendor power-estimation results.
Thermal design must cover both sustained processor activity and high switching activity in the Kintex-7 fabric. Place thermal vias beneath the device where package construction permits, spread power-return copper across the BGA area, and provide an effective path into the PCB stackup. Estimated: the junction-temperature rise equals power dissipation multiplied by the effective board-to-ambient thermal resistance, but neither term can be finalized until utilization, airflow, copper area, and board construction are known.
Keep high-speed memory, transceiver, and processor interfaces away from noisy analog or switching-supply regions. Match clock and data traces to the target impedance, control skew across byte groups, and follow AMD memory-interface routing guidance for vias, fly-by topology, and return paths. Reserve clean clocking with low jitter and separate noisy digital returns from sensitive reference grounds. Post-route extraction and SI simulation should use the final PCB stackup rather than generic impedance presets.
تعمیل کی معلومات
No product-specific environmental or automotive compliance declaration was identified. Confirm RoHS, REACH, halogen-free status, and conflict-minerals documentation against the exact AMD/Xilinx ordering code and its regulatory documentation.