XMC1302T038X0200ABXUMA1 - 32MHz ARM Cortex-M0 | Infineon
MPN: XMC1302T038X0200ABXUMA1 ✗ اختتامِ زندگیXMC1302T038X0200ABXUMA1 جائزہ
A microcontroller is a programmable semiconductor device containing a processor core, memory, and integrated peripherals. The ARM Cortex-M0 core provides a compact instruction set and event-driven architecture for real-time control. Within the product hierarchy, the XMC1302 belongs to the XMC1000 family of industrial 32-bit microcontrollers, combining mixed-signal acquisition, timer and PWM control, serial connectivity, and general-purpose embedded processing in one package.
Key features include a maximum CPU frequency of 32 MHz, 200 KB of program flash, 16 KB of SRAM, and operation from 3.3 V or 5 V supplies. Mixed-signal acquisition supports embedded measurement functions, while timer and PWM resources suit motor, power-conversion, and general digital-control systems. The 38-pin PG-TSSOP-38-9 package provides a practical surface-mount option for designs requiring extensive I/O without moving to a larger leaded package.
The Cortex-M0 processing architecture is suitable for supervisory and real-time control tasks where deterministic peripheral operation, compact code size, and low implementation complexity matter more than high-performance computation. The XMC1000 application focus includes low-cost embedded control and digital power conversion, where the integrated timers, communications peripherals, and analog acquisition resources can reduce external component count.
Typical uses include digital power converters, motor-control supervisory functions, industrial automation modules, sensor-conditioning systems, communications controllers, and compact embedded-control boards. The 32 MHz processing rate supports responsive control loops while the 200 KB flash area provides room for application firmware, boot code, configuration data, and library routines.
For PCB implementation, use the manufacturer pin-description table and PG-TSSOP-38-9 footprint when assigning every signal. Check power, ground, decoupling, programming-interface, reset, clock, and analog-pin assignments before routing. Stable operation depends on correct supply voltage selection, adequate local bypass capacitance, clean analog grounding, and firmware initialization of every enabled peripheral.
This page summarizes the principal device characteristics and organizes practical information for sourcing and design review, including package details, application suitability, verified source links, engineering considerations, and qualified drop-in alternatives for footprint-compatible designs.
کے لیے ڈراپ اِن متبادل XMC1302T038X0200ABXUMA1 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XMC1302T038X0200ABXUMA1 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Product Type.
XMC1302T038X0200AAXUMA1
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XMC1301T038X0200AAXUMA1
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XMC1300T038X0200AAXUMA1
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XMC1401T038X0200AAXUMA1
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XMC1400T038X0200AAXUMA1
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XMC1302T038X0200ABXUMA1 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 32-bit ARM Cortex-M0 industrial microcontroller |
| Manufacturer | Infineon Technologies |
| Maximum CPU Frequency | 32 MHz |
| Processor Architecture | ARM Cortex-M0 |
| Program Flash Memory | 200 KB |
| SRAM | 16 KB |
| سپلائی وولٹیج | 3.3 V or 5 V |
| ADC Resolution | 12 bit |
| پیکیج | PG-TSSOP-38-9, 38 pins |
| ماؤنٹنگ ٹائپ | Surface mount |
| Order Code | XMC1302-T038X0200-AB |
| Programmable Serial Connectivity | Multi-protocol serial connectivity |
| Mixed-Signal Acquisition | Mixed-signal acquisition resources |
| Timer and PWM Control | Integrated timer and PWM resources |
| Product Series | XMC1000 |
XMC1302T038X0200ABXUMA1 pg-tssop-38-9, 38 pins پن کنفیگریشن گائیڈ
XMC1302T038X0200ABXUMA1 (pg-tssop-38-9, 38 pins پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XMC1302T038X0200ABXUMA1.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XMC1302T038X0200ABXUMA1 کے لیے موزوں ہے 6 ایپلیکیشنs: Digital Power Conversion, Industrial Motor Control, Sensor Conditioning and Data Acquisition, Communication Controller, Industrial Automation Module, Low-Cost Embedded Control Board.
Digital Power Conversion
The XMC1302T038X0200ABXUMA1 fits digital power-conversion supervisory and mixed-signal control designs because it combines a 32 MHz Cortex-M0 core with 200 KB of flash, 16 KB of SRAM, timer and PWM resources, and a 12-bit ADC. Peripheral-driven timing can reduce the processor burden in control-loop tasks, while the flash provides space for compensation, fault handling, and monitoring firmware. Its 3.3 V or 5 V operation also supports industrial power-system architectures. Before implementation, verify the required PWM channels, ADC input count, control-loop latency, and analog signal range against the manufacturer pin and peripheral tables.
تجویز کردہ
Industrial Motor Control
The XMC1302T038X0200ABXUMA1 is appropriate for supervisory motor-control systems that coordinate timers, PWM generation, digital inputs, and analog feedback. A 32 MHz ARM Cortex-M0 core provides enough control bandwidth for loop management, sequencing, and fault diagnostics, while the 200 KB flash can retain application code and calibration parameters. The 38-pin TSSOP package offers a practical balance between I/O access and board size. Verify the required timer channels, encoder or position-signal inputs, speed range, and PWM resolution in the manufacturer documentation before assigning pins.
تجویز کردہ
Sensor Conditioning and Data Acquisition
The XMC1302T038X0200ABXUMA1 can serve as the central controller in a compact sensor-conditioning system because its 12-bit ADC, 32 MHz processing core, and 16 KB SRAM support sampling, filtering, thresholding, and communication tasks. Firmware can convert acquired measurements into control commands or transmit them through an available serial interface. Its 3.3 V or 5 V operation accommodates common industrial sensing architectures. Designers should confirm analog input count, input-impedance requirements, ADC timing, reference voltage, and sensor-signal range before finalizing the schematic.
تجویز کردہ
Communication Controller
The XMC1302T038X0200ABXUMA1 is suitable for protocol-handling and communications-controller tasks where an event-driven Cortex-M0 core, 200 KB of flash, and multi-protocol serial connectivity offer a useful balance of capability and complexity. Firmware can frame data, maintain protocol state, perform buffer management, and report diagnostics over the selected interface. The 38-pin package provides access to both communications and general-purpose I/O. Confirm the required UART, SPI, or other serial resources, pin multiplexing, baud-rate requirements, and interrupt priorities against the manufacturer peripheral documentation.
تجویز کردہ
Industrial Automation Module
The XMC1302T038X0200ABXUMA1 can implement compact industrial automation nodes that monitor digital inputs, evaluate analog sensor channels, drive timers or PWM outputs, and exchange operating data. Its 200 KB flash and 16 KB SRAM support layered firmware containing device control, diagnostics, communication protocols, and nonvolatile parameter handling. The 38-pin TSSOP-38-9 package supports moderate I/O density without an excessive footprint. Review electrical levels, isolation boundaries, watchdog behavior, startup sequencing, and industrial temperature requirements before deploying the device in production equipment.
تجویز کردہ
Low-Cost Embedded Control Board
The XMC1302T038X0200ABXUMA1 is well suited to compact embedded-control boards requiring deterministic peripheral operation without a high-cost processor. The 32 MHz Cortex-M0 core handles scheduling and application logic, while the 200 KB flash stores firmware and 16 KB SRAM supports active control state. Mixed-signal acquisition, timers, PWM, and serial connectivity allow a single device to consolidate several functions. For a new design, verify programming access, decoupling, clock configuration, pin multiplexing, and power-supply sequencing against the manufacturer reference guidance.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XMC1302T038X0200ABXUMA1 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XMC1302T038X0200AAXUMA1 | XMC1301T038X0200AAXUMA1 | XMC1300T038X0200AAXUMA1 | XMC1401T038X0200AAXUMA1 | XMC1400T038X0200AAXUMA1 |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-TSSOP-38-9 | PG-TSSOP-38-9 | PG-TSSOP-38-9 | PG-TSSOP-38-9 | PG-TSSOP-38-9 | PG-TSSOP-38-9 |
| CPU Core | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Product Family | XMC1000 | XMC1000 | XMC1000 | XMC1000 | XMC1400 | XMC1400 |
| Primary Application Focus | Low-cost embedded control and digital power conversion | Embedded control and digital power conversion | Embedded control | Embedded control | Industrial control | Industrial control |
اہم امتیازی خصوصیات
- Higher flash capacity within the same XMC1302 ordering family (بمقابلہXMC1301T038X0200AAXUMA1)
- Complete mixed-signal resource set for embedded power control (بمقابلہXMC1400T038X0200AAXUMA1)
- Closest ordering-code alternative retains the complete headline resource set (بمقابلہXMC1302T038X0200AAXUMA1)
ڈیزائن نوٹس
Use the Infineon PG-TSSOP-38-9 package drawing as the controlling footprint reference and verify every pad, pin-1 orientation, and exposed thermal requirement before releasing Gerber data. The TSSOP lead pitch and pin numbering must align exactly with the package drawing; placing the correct symbol is not sufficient if its origin and rotation differ from the land pattern. Also preserve access to programming and debug signals so production programming and diagnostics can be performed without board modifications.
Design the supply network for either the 3.3 V or 5 V operating condition appropriate to the complete system, and apply the manufacturer limits for each supply configuration. Place the required bypass capacitors close to their power and ground pins with short, low-inductance return paths. Check startup behavior, voltage tolerances, analog-reference requirements, and peripheral current demand rather than assuming the nominal supply label alone defines safe operating conditions.
Separate analog acquisition paths from digital switching nodes and route them over a stable ground reference. Keep ADC traces short, minimize loop area, use suitable shielding where needed, and follow the manufacturer recommendations for the analog reference. Clock and serial interfaces should also be routed away from high-current switching nodes. Pin-multiplexing constraints can force otherwise logical signal assignments to change, so complete peripheral planning before schematic capture.
Do not substitute an XMC device solely because it has a 38-pin TSSOP package. Confirm complete pin functions, alternate-function multiplexing, timer assignments, ADC inputs, memory capacity, interrupt behavior, supply limits, and qualification requirements. For reduced-memory replacements, measure the firmware image, stack usage, and SRAM allocation at the highest expected interrupt load. A footprint-compatible package is necessary for a drop-in replacement but does not by itself guarantee software compatibility.
Calculate the worst-case junction temperature using the actual switching loss, ambient temperature, package thermal data, PCB copper, and airflow. Although a microcontroller generally dissipates less power than a switching regulator, 3.3 V or 5 V operation, sustained high peripheral activity, and a TSSOP package can still raise junction temperature. Preserve the manufacturer's recommended copper area and avoid placing heat sources directly beneath or against the device on a densely populated assembly.
تعمیل کی معلومات
The manufacturer product is described as an industrial XMC1000 microcontroller, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the cited product records.