XMC4104Q48K128BAXUMA1 - 80MHz Cortex-M4 MCU | Infineon
MPN: XMC4104Q48K128BAXUMA1 ✓ فعالXMC4104Q48K128BAXUMA1 جائزہ
An Arm Cortex-M4 microcontroller is a 32-bit embedded processor designed for real-time control. The Cortex-M4 core combines exception handling, deterministic interrupt response, and efficient instruction execution within the broader MCU hierarchy. XMC4000 devices extend this processor core with embedded flash, SRAM, digital and analog peripherals, and communication interfaces for industrial equipment, transportation systems, and connected automation.
The principal specifications are an 80 MHz maximum clock, 128 KB flash, and 20 KB SRAM. The manufacturer identifies the device as an industrial XMC4000 member with CAN and LIN networking, making it suitable for distributed control nodes. Its 48-lead PG-VQFN package reduces board area while supporting high-density mixed-signal and motor-control designs, although exposed-pad thermal management remains essential when operating at high clock rates.
The XMC4104-Q48K128-BA platform combines a 32-bit Arm Cortex-M4 processor with embedded memory and industrial peripherals. Memory-mapped peripherals support real-time control tasks, while CAN and LIN interfaces connect the controller to sensors, actuators, operator panels, and other embedded nodes. The 128 KB flash capacity provides room for application code, configuration data, and boot logic without requiring an external program-memory device.
Typical applications include industrial motor drives, servo and motion control, automated test equipment, CAN-connected sensors, LIN actuator modules, and compact industrial controllers. The combination of 80 MHz processing performance, 20 KB SRAM, and embedded communications allows control loops, communication protocols, and diagnostic functions to run within a single device.
PCB design should follow the manufacturer's pin-description table and land-pattern guidance. Place decoupling capacitors close to the supply pins, route sensitive analog and communication signals away from fast digital switching nodes, and connect the exposed pad to an appropriately sized thermal-copper area. Validate the final power and ground layout for worst-case clock, temperature, and communication activity.
This product summary combines the manufacturer product information, ordering information, technical characteristics, and compatible same-family options with practical design guidance for MCU selection, PCB implementation, motor control, and industrial communications. It supports engineers comparing the XMC4104Q48K128BAXUMA1 with other Cortex-M4 controllers without treating functionally similar devices as automatic drop-in replacements.
کے لیے ڈراپ اِن متبادل XMC4104Q48K128BAXUMA1 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
XMC4104Q48K128ABXUMA1
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XMC4104-Q48K128-BA
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XMC4102Q48K128BAXUMA1
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XMC4103Q48K128BAXUMA1
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XMC4100Q48K128BAXUMA1
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XMC4104Q48K128BAXUMA1 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Architecture | 32-bit RISC |
| Embedded Flash Memory | 128 KB |
| Flash Organization | 128K x 8 |
| SRAM | 20 KB |
| Series | XMC4000 |
| Device Family | XMC4100/4200 |
| Communication Interfaces | CAN and LIN |
| پیکیج | PG-VQFN-48-53 |
| Package Type | 48-lead no-lead square surface-mount package |
| Terminal Count | 48 terminals |
| ماؤنٹنگ ٹائپ | Surface mount |
| Target Application | Industrial motor drives and motion control |
| Temperature Grade | Automotive |
XMC4104Q48K128BAXUMA1 48-lead no-lead square surface-mount package پن کنفیگریشن گائیڈ
XMC4104Q48K128BAXUMA1 (48-lead no-lead square surface-mount package پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XMC4104Q48K128BAXUMA1.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XMC4104Q48K128BAXUMA1 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Motor Drive Controller, Servo and Motion Control, CAN-Connected Sensor Hub, LIN Actuator Module, Automated Test Equipment, Industrial Network Gateway.
Industrial Motor Drive Controller
The XMC4104Q48K128BAXUMA1 fits industrial motor-drive control because its Arm Cortex-M4 core operates at up to 80 MHz while the device includes 128 KB of flash and 20 KB of SRAM for control algorithms and diagnostics. CAN and LIN connectivity supports communication with drive modules, sensors, and supervisory equipment. In a motor-control design, the microcontroller can execute current and speed-control loops while handling network diagnostics and protection sequencing. The 48-lead VQFN package keeps the controller compact, but the exposed thermal pad and high-current power stage require careful copper allocation. Firmware and hardware validation must confirm that the selected XMC4104 variant contains every required PWM, capture, analog, and communication peripheral for the motor-control topology.
Servo and Motion Control
The XMC4104Q48K128BAXUMA1 is suitable for compact servo and motion-control modules where deterministic execution, embedded memory, and industrial communications must coexist in one device. Its 80 MHz Cortex-M4 core provides computational headroom for position loops, velocity control, and digital filtering, while 128 KB of flash stores application code and 20 KB of SRAM supports working state. CAN can connect the controller to a drive electronics network, and LIN can serve local sensors or actuator nodes. Using the device in a motion platform also requires careful validation of timer resources, encoder interfaces, analog channels, and pin multiplexing for the exact XMC4104-Q48K128-BA variant before firmware and PCB release.
CAN-Connected Sensor Hub
A CAN-connected sensor hub can use the XMC4104Q48K128BAXUMA1 to consolidate measurements from analog and digital sensors before forwarding results over a vehicle or industrial network. The 80 MHz Cortex-M4 core supports filtering, calibration, diagnostics, and protocol handling, while 128 KB of flash accommodates application firmware and configuration data. CAN provides the primary communication path, and LIN can support lower-cost peripheral nodes. The 48-lead VQFN footprint allows the hub to remain compact, but pin assignment, transceiver interface levels, termination, and ground-return design remain external engineering responsibilities. Validate that each required sensor interface and communication peripheral is present in the exact ordering variant before freezing the hardware.
LIN Actuator Module
The XMC4104Q48K128BAXUMA1 can serve as the intelligent controller in a LIN actuator module because it combines an 80 MHz Cortex-M4 processor with embedded flash, 20 KB of SRAM, and native CAN and LIN networking. The MCU can interpret sensor inputs, apply control logic, manage local diagnostics, and respond to network requests without a separate communications processor. The 48-lead VQFN package supports compact electromechanical assemblies, although a LIN transceiver, protection network, and appropriate power regulation are still required. During hardware design, verify LIN pin routing, oscillator and clock requirements, reset behavior, and peripheral assignments against the manufacturer documentation. Firmware should include node-addressing, timing, fault recovery, and safe-state behavior appropriate to the actuator.
Automated Test Equipment
The XMC4104Q48K128BAXUMA1 is a viable control processor for automated industrial test equipment that must execute measurement sequencing, fixture control, and network communications. The 80 MHz Arm Cortex-M4 core supports real-time scheduling, while 128 KB of flash provides room for test programs and 20 KB of SRAM accommodates acquisition and control buffers. CAN and LIN can organize distributed fixtures, operator interfaces, and peripheral test nodes. Its 48-lead VQFN package helps limit board area in dense instruments, but analog isolation, signal-conditioning components, precision references, and power conversion remain separate design elements. Engineers should confirm ADC-related functions, timer channels, debug access, and pin multiplexing in the exact device variant before using the MCU as the sole measurement-control hub.
Industrial Network Gateway
The XMC4104Q48K128BAXUMA1 can be used in a compact industrial network gateway where CAN and LIN traffic must be coordinated with local control logic. Its 80 MHz Cortex-M4 core handles protocol processing, diagnostics, and application tasks, while 128 KB of flash and 20 KB of SRAM provide space for code, tables, and message buffers. The XMC4000 family integration can reduce the component count compared with separate microcontroller and communications devices. A practical gateway still requires isolated or protected interfaces, robust power supplies, watchdog handling, and careful signal-integrity layout. Verify which CAN and LIN instances, message filters, baud-rate support, and pin functions are available in the target ordering code, then validate network timing under maximum bus load.
کے لیے انجینئرنگ ریفرنس ڈیٹا XMC4104Q48K128BAXUMA1 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XMC4104Q48K128ABXUMA1 | XMC4104-Q48K128-BA | XMC4102Q48K128BAXUMA1 | XMC4103Q48K128BAXUMA1 | XMC4100Q48K128BAXUMA1 |
|---|---|---|---|---|---|---|
| Package | PG-VQFN-48-53 | PG-VQFN-48-53 | PG-VQFN-48-53 | PG-VQFN-48-53 | PG-VQFN-48-53 | PG-VQFN-48-53 |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Embedded Flash | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Series | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 |
| Qualification Suffix | BA | A | BA | BA | BA | BA |
اہم امتیازی خصوصیات
- Closest identified ordering-code match (بمقابلہXMC4104Q48K128ABXUMA1)
- Direct manufacturer ordering designation (بمقابلہXMC4104-Q48K128-BA)
- XMC4000 integration for industrial networking (بمقابلہXMC4100Q48K128BAXUMA1)
ڈیزائن نوٹس
The PG-VQFN-48-53 package exposes its underside thermal connection to the PCB. Assign a continuous ground or thermal copper region beneath the device and use multiple thermal vias where the manufacturer land pattern permits. Keep high-current motor-switching paths away from this area and size copper for the intended clock, ambient temperature, and switching-loss environment. Validate junction temperature under worst-case processing load rather than relying only on ambient temperature.
Place every required supply bypass capacitor immediately beside its associated power pin and provide the shortest possible ground return. Separate CAN and LIN routing from motor-control switching nodes, clocks, and high-current traces. Use a continuous ground plane where practical, but split noisy power loops so that motor-current paths do not flow beneath the MCU or communication interfaces. Follow the manufacturer package dimensions and exposed-pad land pattern for production.
Do not substitute an XMC4000 member solely because the flash size, clock rate, and package appear identical. Compare pin multiplexing, timer channels, analog functions, communication instances, oscillator options, reset behavior, debug signals, and exposed-pad connections. The target and its AB ordering variant differ in their qualification suffix, so validate temperature and production requirements before releasing a drop-in replacement to manufacturing.
Decouple the MCU supply with local high-frequency and bulk capacitance selected from the manufacturer's voltage and stability recommendations. Check startup current, peripheral load, and external bus activity in the power budget. The 80 MHz operating rate can increase dynamic power consumption compared with a low-frequency design. Keep the regulator output impedance and power-supply transient response compatible with the selected operating frequency and capacitor characteristics.
تعمیل کی معلومات
The product is identified as an industrial XMC4000 microcontroller by Infineon, while a distributor listing labels the ordering variant with an automotive temperature grade. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product or quality documentation.
