XMC4200Q48K256ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon
MPN: XMC4200Q48K256ABXUMA1 ✓ فعالXMC4200Q48K256ABXUMA1 جائزہ
An Arm Cortex-M4 microcontroller is a reduced-instruction-set embedded processor within the microcontroller and semiconductor hierarchy. It combines processor performance, embedded flash, SRAM, peripherals, and interrupt-driven control in one integrated circuit. XMC devices belong to Infineon's XMC4000 family and target industrial automation, motor control, communications, sensing, and connected embedded equipment.
Three defining specifications are the 80 MHz operating frequency, 256 KB flash, and 40 KB SRAM. The 80 MHz Cortex-M4 core supports efficient control-loop execution, while 256 KB of embedded flash accommodates application code and data. The 40 KB SRAM provides working memory for real-time algorithms and peripheral data handling. The package is a 48-terminal PG-VQFN with an exposed thermal pad for compact PCB placement and improved heat dissipation.
The device is positioned for industrial environments requiring operation from -40°C to 125°C. Its microcontroller architecture integrates conventional digital control functions with dedicated peripherals for communication and timing, allowing designers to consolidate functions that otherwise require separate interface controllers. The exposed pad should be connected to the PCB ground plane according to the manufacturer's package guidance to optimize thermal and electrical performance.
Typical applications include industrial automation controllers, sensor and condition-monitoring systems, motor-control equipment, communications gateways, and compact embedded control platforms. The 80 MHz processing rate is useful for proportional-integral-derivative control, state-machine execution, communication protocol handling, and signal processing. Its 256 KB flash supports moderately complex firmware while maintaining a compact 48-pin package.
For PCB design, place the exposed pad on a dedicated solderable thermal and ground pad, preserve the manufacturer-recommended footprint dimensions, and provide short, low-impedance supply connections. Keep analog and communication interfaces away from fast digital return paths when the application includes sensitive measurements. Firmware configuration should also account for the industrial temperature rating and all peripheral operating constraints.
This page combines the exact ordering information, core specifications, package information, design guidance, selection criteria, and verified same-family alternatives to support faster engineering evaluation and sourcing of the XMC4200Q48K256ABXUMA1.
کے لیے ڈراپ اِن متبادل XMC4200Q48K256ABXUMA1 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XMC4200Q48K256ABXUMA1 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Temperature Range, Package, Architecture, Flash Memory, SRAM.
XMC4200Q48K256BAXUMA1
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XMC4200-Q48K256-BA
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XMC4100Q48F128BAXUMA1
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XMC4108Q48K64BAXUMA1
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XMC4200Q48K256ABXUMA1 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| CPU Frequency | 80 MHz |
| Architecture | ARM 32-bit |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 |
| SRAM | 40 KB |
| آپریٹنگ درجہ حرارت رینج | -40°C to 125°C |
| Core Supply Voltage | 1.3 V |
| پیکیج | PG-VQFN-48-54 |
| Number of Terminals | 48 |
| Package Shape | Square |
| Terminal Form | No lead |
| Package Code | HVQCCN |
| ماؤنٹنگ ٹائپ | Surface mount |
| Shipping Method | Tape and reel or cut tape |
| Product Series | XMC4000 |
| Core Variant | Single-core |
XMC4200Q48K256ABXUMA1 hvqccn پن کنفیگریشن گائیڈ
XMC4200Q48K256ABXUMA1 (hvqccn پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XMC4200Q48K256ABXUMA1.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XMC4200Q48K256ABXUMA1 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Automation Controller, Industrial Sensor Monitoring, Compact Motor Control, Communications Gateway, Motorized Equipment Controller, Embedded Control Platform.
Industrial Automation Controller
The XMC4200Q48K256ABXUMA1 fits compact automation controllers that execute deterministic control logic, monitor digital inputs, and coordinate communications between field equipment. Its 80 MHz Arm Cortex-M4 core provides ample instruction throughput for state machines, proportional-integral-derivative loops, and diagnostic routines, while 256 KB of flash accommodates control firmware and parameter storage. The 40 KB SRAM supports working variables and communication buffers. Operating across -40°C to 125°C makes the device suitable for industrial equipment exposed to temperature variation. In a controller, the exposed pad beneath the 48-pin VQFN should connect to a solid ground region and thermal copper area to improve heat spreading without changing the component footprint.
تجویز کردہ
Industrial Sensor Monitoring
The XMC4200Q48K256ABXUMA1 is suitable for distributed condition-monitoring equipment that samples sensors, evaluates thresholds, and reports system status. Its 80 MHz Cortex-M4 core can handle filtering, calibration routines, and event classification while leaving capacity for a communications protocol. The 256 KB flash provides room for code tables, sensor compensation data, and firmware, and the 40 KB SRAM can hold sample buffers and operating state. A compact 48-pin VQFN also supports space-constrained instrument housings. For accurate measurements, follow the manufacturer guidance for analog-capable pins, reference connections, grounding, and decoupling. Maintain short return paths for sensitive sensor inputs and place supply capacitors close to the device's supply terminals.
تجویز کردہ
Compact Motor Control
The XMC4200Q48K256ABXUMA1 can serve as the central controller in compact industrial motor-control subsystems where fast control computation and deterministic peripheral handling are required. The 80 MHz Cortex-M4 core executes control-loop calculations, while 256 KB of flash holds motion algorithms and configuration data. Its 40 KB SRAM is useful for position variables, sampled currents, and command buffers, and the -40°C to 125°C rating supports harsh operating environments. The 48-pin VQFN allows a compact mixed-signal layout, although exposed-pad connection and analog grounding remain critical. Before selecting the device, verify motor-control timers, analog inputs, break inputs, and electrical limits against the manufacturer documentation for the exact package variant.
تجویز کردہ
Communications Gateway
The XMC4200Q48K256ABXUMA1 is appropriate for small industrial communications gateways that translate between local serial interfaces and higher-level equipment. Its 80 MHz processor can service protocol stacks, maintain timing, and execute background diagnostics, while 256 KB flash provides sufficient code and configuration storage for a focused gateway design. The 40 KB SRAM supports packet buffers and interface state, and the 48-pin package reduces board area in compact control cabinets. When laying out the board, separate communication signal routing from noisy switching or motor-drive paths and use a continuous low-impedance ground plane. Apply the manufacturer's recommended startup and decoupling network, and verify each communication peripheral's pin multiplexing before finalizing the PCB footprint.
تجویز کردہ
Motorized Equipment Controller
The XMC4200Q48K256ABXUMA1 is well suited to embedded controllers for pumps, actuators, valves, and other motorized industrial equipment requiring coordinated digital and analog control. The 80 MHz Cortex-M4 core can run timing-critical sequencing and closed-loop logic, and the 256 KB flash capacity supports operating modes, calibration, and fault handling. Its 40 KB SRAM provides space for real-time variables and acquisition buffers. The -40°C to 125°C operating range supports demanding equipment environments. Use the package's exposed pad as a solderable thermal and ground connection, preserve the specified land pattern, and route high-current motor paths away from the microcontroller and analog input traces. Validate the complete power architecture and motor-driver interface before deployment.
تجویز کردہ
Embedded Control Platform
The XMC4200Q48K256ABXUMA1 works well as the central processor in a compact embedded-control platform combining real-time control, communications, and data acquisition. Its 256 KB flash supports a structured application with boot code, control software, configuration, and diagnostics, while 40 KB SRAM supports task state and communication buffers. At 80 MHz, the Cortex-M4 core can balance periodic control routines with background protocol handling. The 48-pin VQFN package supports dense industrial boards, and the exposed pad offers an effective route for heat transfer through the PCB. Plan the footprint from the manufacturer's package drawing, connect the exposed pad to ground as directed, and provide local supply bypassing. Firmware should include startup validation, peripheral initialization checks, and safe-state handling for connected actuators.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XMC4200Q48K256ABXUMA1 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XMC4200Q48K256BAXUMA1 | XMC4200-Q48K256-BA | XMC4100Q48F128BAXUMA1 | XMC4108Q48K64BAXUMA1 |
|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | VQFN-48 | VQFN-48 | VQFN-48 | VQFN-48 | VQFN-48 |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Flash Memory | 256 KB | 256 KB | 256 KB | 128 KB | 64 KB |
| Product Family | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 |
| Ordering Suffix | ABXUMA1 | BAXUMA1 | BA base ordering designation | BAXUMA1 | BAXUMA1 |
اہم امتیازی خصوصیات
- Twice the flash capacity of the closest lower-memory family alternative (بمقابلہXMC4100Q48F128BAXUMA1)
- Four times the flash capacity of the smallest listed XMC alternative (بمقابلہXMC4108Q48K64BAXUMA1)
- Exact XMC4200 memory and package configuration for production continuity (بمقابلہXMC4200Q48K256BAXUMA1)
- Base manufacturer configuration with explicit industrial memory details (بمقابلہXMC4200-Q48K256-BA)
ڈیزائن نوٹس
The PG-VQFN-48-54 package includes an exposed pad that must be soldered to the PCB land pattern rather than left floating. Connect it to the device's ground network according to the manufacturer package drawing and use the exposed pad as part of the thermal path. Provide uninterrupted copper on the pad where the layout permits, but preserve the specified clearance around adjacent signal pins. Thermal performance depends on both the solder connection and the available copper area.
Create the footprint from the Infineon XMC4200 package drawing rather than from a generic 48-pin VQFN template. The exact terminal width, pitch, exposed-pad dimensions, and solder-mask definition determine assembly yield and pin alignment. Place the microcontroller so the exposed pad can connect to a broad ground region without forcing sensitive inputs to cross return-current paths. Verify the land pattern against the production PCB and assembly process before release.
Follow the manufacturer's recommended supply network and place the required bypass capacitors close to their associated supply pins. Separate core and analog supply routing where the device documentation provides distinct connections, and keep the ground return continuous beneath and around the exposed pad. Verify startup sequencing, voltage ramps, current limits, and decoupling values for the final power tree because controller performance can be affected by supply impedance rather than clock frequency alone.
Do not treat a shared 48-pin package as proof of complete electrical equivalence. XMC4100 and XMC4108 alternatives have less flash than the 256 KB target, and ordering suffixes can encode qualification differences. Check peripheral assignments, pin multiplexing, voltage limits, exposed-pad requirements, boot configuration, and temperature treatment before replacing XMC4200Q48K256ABXUMA1. Rebuild and regression-test firmware when changing between devices with reduced memory.
تعمیل کی معلومات
The manufacturer product information identifies industrial operation from -40°C to 125°C and an automotive-temperature-grade classification for one ordering listing. Formal RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not stated for the exact ordering code.
