Littelfuse Ends eZ80 MCU Line: What Designers and Buyers Should Do Before December 2026

Littelfuse issues PCN ZAC26-0074 taking final eZ80 orders through 2026-12-21, with deliveries winding down through 2027, closing the Z80 family chapter.

Đã công bố Cập nhật 4 đọc ít nhất ✓ Sẵn sàng AI Chia sẻ

TL;DR — ba câu

  • Littelfuse issued PCN ZAC26-0074 to accept final orders for the eZ80 and all other Littelfuse-owned MCU lines (S1).
  • Mouser has marked eZ80 parts as End of Life on its catalog (S1).
  • Final-order cutoff is 2026-12-21, with deliveries scheduled throughout 2027 (S1).

Được lấy từ key_takeaways (thực tế, tối đa 3 mục). Thực tế và phân tích được đánh dấu riêng biệt

Littelfuse Ends eZ80 MCU Line: What Designers and Buyers Should Do Before December 2026Editorial cover for a component sourcing brief. Chip motif; headline "Littelfuse Ends eZ80 MCU Line: What Designers and Buyers Should Do Before December 2026". No reported key numbers on this brief, so no number strip is drawn. 1 cited source. Static cover (no animation).Littelfuse Ends eZ80 MCU Line: WhatDesigners and Buyers Should Do BeforeDecember 2026XAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

Bạn đã đến từ câu trả lời của AI — này là bản gốc có thể kiểm chứng

Một tóm tắt AI có thể đã bỏ qua cơ sở cho các luận điểm của nó. Dự báo ban đầu, các phần bị ảnh hưởng và mỗi dẫn chứng đều có trên trang này, mỗi cái có thể truy nguồn.

Dự báo XAIPART

Tóm tắt này mang theo một dự đoán có thể bị chứng minh

Các phần bị ảnh hưởng

Không có khớp catalog cho câu chuyện này — không có gì được hiển thị thay vì suy đoán một khớp.

Reported by Hackaday on . Summarized and analyzed by XAIPART Editorial.

What happened

Littelfuse, which owns the Zilog name, has notified customers through PCN ZAC26-0074 that it is accepting final orders for the eZ80 and all other microcontroller lines it currently holds.[S1] Distributor Mouser has correspondingly marked eZ80 parts as "End of Life" on its website.[S1]

This follows the earlier discontinuation of the original Z80 and its peripherals, leaving the eZ80 as the last Z80-family device in commercial production until now.[S1] One reader commenter dates the Z80 itself as 1974–2024 and the eZ80 as 2001–2026.[S1]

Final orders for affected parts will be accepted through , with final deliveries scheduled to take place throughout 2027 as the MCU manufacturing line winds down.[S1] For commercial users still specifying the eZ80 or similar Zilog devices, this effectively ends new-silicon availability.[S1]

Key numbers
MetricReported valueSource
PCN identifierZAC26-0074[S1]
Final-order cutoff date2026-12-21[S1]
Final-delivery windowThroughout 2027[S1]
Distributor status flagEnd of Life (Mouser)[S1]
Lines coveredeZ80 and all other Littelfuse-owned MCU lines[S1]
eZ80 production span (per source comment)2001–2026[S1]
Original Z80 production span (per source comment)1974–2024[S1]

Background timeline

  1. - Original Z80 enters production (date not disclosed by the source beyond the 1974–2024 lifespan cited in comments).
  2. - eZ80 successor family launches (year cited in source comments).
  3. - Original Z80 and its peripherals discontinued (per source comment dating the Z80 to 1974–2024).
  4. - Hackaday reports PCN ZAC26-0074 announcing final orders for eZ80 and other Littelfuse-owned MCU lines.
  5. - Final-order cutoff for eZ80 and remaining Littelfuse MCU lines.
  6. 2027 - Final deliveries to commercial customers as MCU line is wound down.

XAIPART take

Technical impact

Designs still targeting Z80-family silicon must now plan around a fixed-date obsolescence path: last buy by , with deliveries spread across 2027, so any re-spin or safety stock should be sized to that window. The eZ80's role as a drop-in modernized Z80 with on-chip peripherals made it attractive for legacy industrial and embedded systems; without new silicon, maintenance teams will need to consider FPGA soft-cores (open-source Z80 implementations exist, and the source notes TinyTapeout as a fab path) or alternative 8-/16-bit MCUs such as the Renesas RL78 that readers mention as ISA-adjacent. XAIPART analysis

Market impact

The PCN closes out the last commercially supported branch of the Zilog Z80 family, so distributor inventory will tighten fast as the 2026-12-21 cutoff approaches and unit pricing on the secondary market typically rises after EOL flags such as Mouser's. Buyers with field-deployed eZ80 designs should assume that after 2027 there will be no franchised-distribution channel for new units, only brokers and salvage stock, which raises both unit cost and counterfeit risk. XAIPART analysis

Action

Procurement should immediately pull a BOM report of every eZ80 and remaining Littelfuse/Zilog MCU line, confirm whether Mouser's EOL flag covers each MPN in use, and place a last-time-buy sized for the product's expected service life plus a safety buffer before . Engineering should in parallel evaluate an FPGA migration plan using an open-source Z80 core and verify second-source options such as the RabbitCore RCM2000 mentioned in source comments for designs that cannot be re-platformed. XAIPART analysis

XAIPART Forecast

XAIPART expects that, within 9 months of the 2026-12-21 cutoff (i.e., by Q3 2027), franchised-distributor on-hand stock of eZ80 MPNs at Mouser and peer catalogs will be reported at zero SKUs or shown only as obsolete with no buy button, because Littelfuse's stated deliveries are limited to orders placed before the cutoff and are scheduled throughout 2027. This forecast is wrong if Mouser still lists any eZ80 SKU as orderable past 2027-09-30. XAIPART analysis

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. Unconfirmed or single-source items: the specific MPNs and per-part pricing of eZ80 variants affected, whether Littelfuse has issued any companion PCNs beyond ZAC26-0074, and the exact 2027 delivery cadence are not disclosed.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

Dated developments, extracted from this page's timeline (curated milestones = hollow markers).
Timeline of dated developmentsDated entries: 1974-01-01 - Original Z80 enters production (…; 2001-01-01 - eZ80 successor family launches (…; 2024-01-01 - Original Z80 and its peripherals…; 2026-10-11 - Hackaday reports PCN ZAC26-0074 …; 2026-12-21 - Final-order cutoff for eZ80 and ….1974-01-01- Original Z80 enters production (…2001-01-01- eZ80 successor family launches (…2024-01-01- Original Z80 and its peripherals…2026-10-11- Hackaday reports PCN ZAC26-0074 …2026-12-21- Final-order cutoff for eZ80 and …

Các lựa chọn và chu kỳ sống

Các lựa chọn trên tệp — phạm vi thư mục, không phải là bảng xếp hạng thị trường
PhầnQuan hệChu kỳ sốngCơ sở
— Không có tùy chọn nào trong tệp CẦN DỮ LIỆU — Yêu cầu match_type trước khi bất kỳ nhãn tiền thân nào có thể xuất hiện

“Tiền thân” và các nhãn thay thế chỉ đến từ một loại khớp đã được ghi lại, trạng thái chu kỳ sống hoặc văn bản nguồn. Khi không có khớp nào được ghi lại, không có nhãn nào được hiển thị. Các danh sách của chúng tôi không phải là một tham chiếu thị trường.

Các phần bị ảnh hưởng

Không có khớp catalog. Câu chuyện này không khớp với bất kỳ linh kiện nào được liệt kê trên XAIPART hiện tại. Chúng tôi không suy luận khớp và chúng tôi không hiển thị danh sách chờ.

Áp lực chi phí theo chiều

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z -1.4711, notable; Fx Energy z 0.1243, neutral. Composite index -10.1, band neutral.0Input costno readingSupply/demandz −1.4711 · notable46 dFX & energyz +0.1243 · neutral5 dcomposite −10.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)46 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

Cách sản xuất điều này

Xử lý chứng cứ — thu thập, nguồn xác thực, mô hình và cửa
Vết kiểm tra cho brief này
Source fetched Hackaday · hackaday.com · 5,994 chars
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 7,447 tokens · 27.5s · run completed
Gate verdict hold · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.012311 · C10 rounds 0
Time contract 9 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

Mỗi hàng trên đều được sản xuất bởi pipeline, không phải viết bằng tay.

Điểm số biên tập

Kết quả của cửa số xác định — pure PHP, không có sự tham gia của mô hình trong quyết định
Phân tích điểm số cửa 6 kiểm tra áp dụng 6đã qua: 100 phần trăm. Hold items: C3(insufficient_evidence), C13 (falsifiable forecast) — sent to human review. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.5342. Kiểm tra áp dụng đã通过了 6 / 6 = 100% · kết luận: hold Hold items: C3(insufficient_evidence), C13 (falsifiable forecast) — sent to human review Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.5342 Cổng quyết định việc công bố. Điểm số kiểm tra độc lập chỉ có tính chất cố vấn.
Phát hiện lỗi? Hãy cho chúng tôi biết điều gì sai — điều chỉnh được xuất bản cùng với văn bản gốc và được ghi lại. Chúng tôi không chỉnh sửa bài viết một cách im lặng.

Bình luận

Trở thành người đầu tiên bình luận.

Nguồn

  1. Littelfuse Announces Retirement Of The EZ80 — https://hackaday.com/2026/10/11/littelfuse-announces-retirement-of-the-ez80 · rss · truy cập

Các sự kiện được đánh dấu S1/S2 và truy nguyên đến nguồn liên kết. Các đoạn văn có nhãn phân tích là lý do của XAIPART riêng, được giữ tách biệt khỏi các thực tế đã báo cáo. Các liên kết nguồn được theo dõi thay vì nofollow — ghi nhận là cố ý.