Vi điều khiển

Sản phẩm (20.000+)

P3041NXN7PNC - QorIQ P3 4-Core 1.5GHz SoC | NXP Semiconductors
P3041NXN7PNC

P3041NXN7PNC - QorIQ P3 4-Core 1.5GHz SoC | NXP Semiconductors

The NXP Semiconductors P3041NXN7PNC is a QorIQ P3 series communications processor built on 32-bit Power Architecture technology, integrating four e500mc cores running at up to 1.5 GHz in a 1295-pin FCPBGA package measuring 37.5x37.5 mm with industrial -40C to +105C temperature rating. It is a silicon revision 2 device tailored for high-throughput networking and embedded compute workloads. A QorIQ communications processor is a system-on-chip (SoC) that integrates CPU cores, memory controllers, and high-speed serial interfaces for wired and wireless infrastructure. The P3 sub-family sits within the broader QorIQ taxonomy (communications processor -> multicore SoC -> application-specific microprocessor), positioning the part between NXP's lower-power P1/P2020 dual-core devices and the higher-end P4040/P4080 eight-core family. Key features include hardware-accelerated packet processing, three-level cache hierarchy inherited from the P4 platform, dual DDR3/DDR3L memory controllers with ECC, multiple PCI Express Gen 2 controllers, SATA 2.0, Serial RapidIO (SRIO), and integrated 1 GbE and 10 GbE Ethernet MACs. The device is fabricated in a 45 nm process, balancing performance with power efficiency for thermally constrained enclosures. Architecturally, the P3041 combines four Power Architecture e500mc cores sharing a coherent triple-level cache to accelerate multi-threaded packet processing while exposing accelerators such as the Data Path Acceleration Architecture (DPAA) for cryptographic, pattern-match, and queue management offload. This makes the silicon well suited to line-card, control-plane, and appliance platforms where deterministic throughput matters more than peak instruction throughput. Typical applications include enterprise routers and switches, wireless base stations, network-attached storage controllers, industrial control planes, and aerospace/defense embedded compute modules. Engineers select the P3041 when a quad-core Power Architecture design is required at lower power and cost than the eight-core P4080, while retaining the same software ecosystem. When laying out the PCB, allocate at least four PCB layers for the FCPBGA breakout, follow NXP's power-rail sequencing recommendation, and provide sufficient bulk capacitance near the DDR3 interface to meet signal-integrity targets. Thermal management should assume up to the package's maximum T_J rating. This page synthesizes NXP datasheet information, distributor stock and pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a consolidated engineering reference for the P3041NXN7PNC.

RFQ Liên hệ
P4040NSE1PNB - QorIQ P4 4-Core 1.5GHz PowerPC MPU | NXP
P4040NSE1PNB

P4040NSE1PNB - QorIQ P4 4-Core 1.5GHz PowerPC MPU | NXP

The NXP P4040NSE1PNB is a PowerPC e500mc microprocessor in the QorIQ P4 communications processor family, integrating four 32-bit cores at 1.5 GHz core / 1.3 GHz platform frequency into a single SoC. Housed in a 1295-ball FCPBGA (37.5 x 37.5 mm) package, this device targets high-throughput wired and wireless infrastructure workloads where deterministic performance, hardware virtualization, and rich I/O are mandatory. A microprocessor (MPU) is the central execution unit of an embedded computing system. It fetches, decodes, and executes machine instructions while coordinating memory, I/O peripherals, and interrupt controllers through on-chip buses. Multi-core variants like the QorIQ P4 belong to the hierarchy MPU -> embedded processor -> communications SoC -> networking platform, sitting between general-purpose CPUs and ASIC-based packet processors. They deliver software flexibility together with deterministic latency for protocol stacks. Key features of the P4040NSE1PNB include four e500mc cores with hardware virtualization support, integrated 32 KB I-cache and 32 KB D-cache per core plus a large shared L2, on-chip DDR3/DDR3L memory controller with ECC, multiple high-speed serial interfaces (10 GbE, PCIe, SATA, USB), and an SEC security engine for cryptographic acceleration. Industrial temperature operation, complex power management, and SerDes flexibility enable its deployment in routers, switches, and base stations. The architecture uses a hierarchical bus with coherent shared L2 and an integrated CoreNet fabric. Hardware virtualization, DPAA queue management, and Trust Architecture 2.0 security primitives are tightly coupled to the cores. Compared to discrete CPU-plus-ASIC designs, the P4040NSE1PNB reduces BOM, simplifies board layout, and shortens time-to-market for multi-gigabit networking. Typical applications include enterprise routers and switches, multi-service gateways, LTE/small-cell base stations, industrial control planes, and network-attached storage controllers. The 4-core 1.5 GHz configuration is well suited to control and data-plane workloads running an RTOS or embedded Linux with DPDK acceleration. Designers should plan thermal management for the 37.5 mm BGA early in PCB layout, allocate sufficient CoreNet bandwidth for peak traffic, and follow NXP hardware design checklists for DDR3L termination and SerDes reference-clock routing. JTAG and Aurora debug interfaces must be accessible for production programming. This page consolidates distributor pricing, drop-in same-family alternatives, and engineering guidance not present in the manufacturer datasheet, giving component engineers and procurement teams a single source for evaluation.

RFQ Liên hệ
P4040NSE7MMC - QorIQ P4 4-Core 1.5GHz MPU | NXP | Networking SoC
P4040NSE7MMC

P4040NSE7MMC - QorIQ P4 4-Core 1.5GHz MPU | NXP | Networking SoC

The NXP P4040NSE7MMC is a 4-core PowerPC e500mc microprocessor from the QorIQ P4 communications platform, operating at up to 1.5 GHz core frequency and housed in a 1295-ball FCBGA package (37.5 x 37.5 mm). It integrates 512 KB of L2 cache per-core plus a shared 2 MB L3 cache, dual 64-bit DDR2/DDR3 memory controllers with ECC, and high-speed SerDes lanes targeting high-performance networking, wireline access, and enterprise router workloads. A microprocessor (MPU) is a single-chip CPU built from a complete instruction-set processor, caches, memory controllers, and peripheral interfaces, designed to execute an operating system and application workloads without external coprocessors. In the platform taxonomy, the QorIQ P4 sits below the P4080 flagship and above the P3041, all sharing pin-and software-compatibility so that customers can scale the same PCB across four-, six-, eight-, and dual-core variants. The e500mc core is a 32-bit Power Architecture implementation superscalar issue engine tuned for deterministic packet-processing at GHz frequencies. Key features of the P4040NSE7MMC include four e500mc cores at 1.5 GHz on a 45 nm process, integrated dual 64-bit DDR2/DDR3 controllers with ECC, hardware-accelerated pattern matching and cryptography, multiple 10 Gigabit Ethernet and PCI Express Gen2 interfaces via the on-chip SerDes, and an enhanced local bus controller. The N + suffix denotes the standard temperature variant with operating voltages of 1.5 V / 1.8 V / 2.5 V / 3.3 V, and NXP's product longevity program guarantees a minimum 10-year assured supply window. Architecturally, the device pairs a coherent CoreNet fabric with the e500mc cores, granting unified access to L2, L3, and the memory subsystem while sustaining low-latency I/O through on-chip bridges. This balance of multi-core throughput and deterministic I/O is what makes QorIQ P4 the reference platform for terabit-class edge routers, security appliances, and control-plane processing in modern networking equipment. Typical applications include enterprise routing and switching, network security appliances (firewalls, UTM, IPS), wireless base-station controllers, packet-DPI accelerators, and industrial control or storage controllers that need PowerPC software continuity. When designing with this MPU, provision at least eight PCB layers for the FCBGA escape, meet the 1 mm ball-pitch land-pattern tolerance, and plan the thermal solution for the 25-35 W envelope under sustained DP packet loads. Use NXP's QorIQ SDK and reference designs to shorten bring-up. This page consolidates end-of-life notice context, drop-in alternatives from the same QorIQ family, pricing snapshots, and engineering design notes that are not assembled on any single manufacturer or distributor page.

RFQ Liên hệ
P4040NSN1NNB - QorIQ P4 4-Core 1.5GHz PowerPC MPU | NXP
P4040NSN1NNB

P4040NSN1NNB - QorIQ P4 4-Core 1.5GHz PowerPC MPU | NXP

The NXP P4040NSN1NNB is a PowerPC e500mc microprocessor from the QorIQ P4 family, integrating four 32-bit cores running up to 1.5 GHz in a 1295-ball FCPBGA (37.5x37.5 mm) package. It targets high-throughput embedded applications where deterministic performance, hardware virtualization, and rich I/O are required. A microprocessor (MPU) is the central processing unit of an embedded system, executing instructions fetched from memory and orchestrating peripherals through on-chip controllers. Within the broader taxonomy, the P4040NSN1NNB sits under microprocessor -> embedded processor -> SoC -> integrated circuit -> semiconductor. PowerPC e500mc is a 32-bit superscalar core family used extensively in networking, telecom, and industrial control, where deterministic latency and ECC-protected memory are valued over raw GHz. Key features of the P4040NSN1NNB include four e500mc cores operating at 1333/1333 MHz core-to-platform frequency ratios, hardware-assisted virtualization for partition isolation, integrated security engines for cipher acceleration, and a high-bandwidth interconnect linking cores to memory and SerDes lanes. The 1295-ball FCPBGA exposes extensive I/O including multiple Gigabit Ethernet controllers, PCIe, SATA, and DDR3 memory interfaces, making the device suitable for line-rate data plane workloads. Architecturally, the P4040NSN1NNB combines a coherent shared L2 cache, CoreNet fabric, and datapath accelerators that offload common packet-processing primitives from the cores. This heterogeneity reduces CPU load and improves throughput per watt, which is critical for fanless or constrained-cooling deployments in carrier-grade equipment. Typical applications include multi-service routers, wireless base stations, industrial control gateways, and storage controllers. The combination of four cores, virtualization, and integrated peripherals allows a single P4040 to replace multiple discrete processors, simplifying board layout and reducing bill of materials. When designing with the P4040NSN1NNB, follow the NXP hardware reference manual for DDR3 trace length matching, SerDes reference clock jitter, and thermal management. A multi-layer PCB with continuous ground planes is recommended for signal integrity at the 1.5 GHz core frequency. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers evaluate the P4040NSN1NNB quickly.

RFQ Liên hệ
P4040NSN1PNB - QorIQ P4 4-Core 1.5GHz PowerPC e500mc MPU | NXP
P4040NSN1PNB

P4040NSN1PNB - QorIQ P4 4-Core 1.5GHz PowerPC e500mc MPU | NXP

The NXP P4040NSN1PNB is a QorIQ P4040 multicore communications microprocessor featuring four PowerPC e500mc cores running at 1.5 GHz, housed in a 1295-ball FCPBGA (Flip-Chip Plastic BGA) package measuring 37.5 mm x 37.5 mm. Built on NXP's QorIQ platform, this device integrates four 32-bit e500mc cores with a shared L2 cache, hardware-accelerated packet processing, and a high-bandwidth interconnect fabric oriented toward networking and embedded infrastructure workloads. A communications MPU (microprocessor unit) is a system-on-chip that integrates CPU cores, memory controllers, packet-processing engines, and high-speed serial I/O into a single device. These parts sit higher in the compute hierarchy than MCUs by offering GHz-class cores, multi-MB coherent caches, DDR3 controllers, and multiple 1/10 GbE MACs/PEC blocks; the P4040NSN1PNB is targeted at routers, switches, and networked industrial systems where deterministic packet throughput matters more than raw CPU clock speed. Key features include four e500mc cores at 1.5 GHz, integrated DDR3/DDR3L memory controller with ECC support, hardware pattern matching for packet inspection, SerDes lanes supporting multiple 1 GbE / 10 GbE configurations, and an enhanced secure-boot chain. The FCPBGA-1295 substrate exposes all high-speed signals through the BGA array, enabling multi-gigabit serial links without external transceivers. The architecture is built on a coherent SMP fabric that allows all four cores to share the L2 cache and on-chip network interfaces. Hardware queues distribute packet buffers across cores, allowing line-rate processing on multiple Gigabit Ethernet ports. Per-core complex includes a 32 KB L1 instruction cache and a 32 KB L1 data cache, while the shared platform cache provides low-latency data exchange between cores and accelerators. Typical applications for the P4040NSN1PNB include enterprise and SMB routers, industrial control gateways, network-attached storage controllers, and edge compute platforms. The 1.5 GHz frequency and four-core SMT capability make it suitable for firewalls and VPN concentrators that must sustain multi-gigabit encrypted throughput alongside control-plane management. When designing with this part, allocate generous BGA fanout routing and thermal management for the 37.5 x 37.5 mm substrate. Power decoupling requires multiple bulk and high-frequency ceramic capacitors placed as close as possible to the ball grid, and a high-efficiency multi-phase VRM is needed to supply the core and SerDes rails. This page synthesizes distributor pricing, internal die/process details, and drop-in alternatives for the QorIQ P4040 part that are not consolidated in the manufacturer datasheet.

RFQ Liên hệ
P4040NSN7PNAC - QorIQ P4 4-Core 1.5GHz SoC | NXP Semiconductors
P4040NSN7PNAC

P4040NSN7PNAC - QorIQ P4 4-Core 1.5GHz SoC | NXP Semiconductors

The NXP Semiconductors P4040NSN7PNAC is a 32-bit QorIQ P4 multicore communications processor integrating 4 PowerPC e500mc cores running at up to 1.5 GHz, packaged in a 1295-ball FCPBGA (37.5x37.5 mm) with operating temperature range 0 to 105 degrees C. The device is part of the QorIQ P4 platform derived from the P4080 flagship and includes DDR2/DDR3 memory controllers with ECC, eight 1 Gbps Ethernet MACs, two 10 Gbps Ethernet MACs (XAUI), PCI Express and Serial RapidIO interfaces for high-end networking and storage platforms. A QorIQ communications processor is a system-on-chip (SoC) designed by NXP (formerly Freescale) for wired and wireless infrastructure equipment. It sits in the product hierarchy: SoC -> communications processor -> multicore microprocessor -> PowerPC architecture -> embedded computing. The QorIQ P4 series was specifically engineered for routers, switches, base stations, and unified threat management (UTM) appliances where deterministic performance, hardware-accelerated packet processing, and high-throughput I/O are mandatory. Compared with single-core PowerQUICC predecessors, QorIQ platforms deliver multi-gigabit data-plane throughput while keeping power dissipation under 30 W. The P4040NSN7PNAC integrates hardware datapath acceleration engines (DPAA), a security engine supporting IPsec, SSL, and Kasumi, an enhanced local bus controller, four I2C controllers, four UARTs, and integrated GPIO. It supports up to 8 GB of DDR3 memory with ECC for error-corrected high-availability operation. The 1.5 GHz core frequency and 32 KB I-cache / 32 KB D-cache per core plus 256 KB L2 per core provide deterministic throughput under network load. Typical applications include multi-service routers, LTE/4G eNodeB baseband processing, enterprise switches with L4-L7 intelligence, network-attached storage (NAS) controllers, and industrial control platforms with deterministic Ethernet. The wide I/O suite (SRIO, PCIe Gen2, XAUI 10 GbE) makes the P4040 an ideal control-plane plus data-plane processor for compact telecom line cards. When designing with this part, ensure the PCB has a minimum 8-layer stack-up with continuous GND planes beneath the FCPBGA, dedicated analog and digital supply domains, and a high-current VRM for the 1.0 V core rail. Thermal management is critical because the FCPBGA at full load dissipates up to 12 W and the 105 degrees C Tj requires a heatsink in air-cooled enclosures. This page synthesizes distributor pricing, drop-in same-package variants from the QorIQ P4 family, and practical design notes not aggregated in any single manufacturer datasheet.

RFQ Liên hệ
P4040NSN7PNC - QorIQ 4-Core 1.5GHz Power Arch SoC | NXP
P4040NSN7PNC

P4040NSN7PNC - QorIQ 4-Core 1.5GHz Power Arch SoC | NXP

The NXP P4040NSN7PNC is a QorIQ P4040 multi-core communications processor featuring four Power Architecture e500mc cores running at 1.5 GHz, housed in a 1295-ball HBGA package. It integrates DDR2/DDR3 memory controllers with ECC, dual 10 Gigabit Ethernet MACs, multiple 1 Gigabit Ethernet controllers, PCI Express Gen2, Serial RapidIO 2.1, and a hardware-accelerated datapath for packet processing. A communications processor (also called a network processor or SoC) is a specialized integrated circuit optimized for the data-plane and control-plane workloads of networking equipment such as routers, switches, base stations, and security appliances. Within the system hierarchy it sits between general-purpose CPUs and dedicated ASIC/FPGA designs, offering software programmability with hardware-accelerated packet handling. The QorIQ family from NXP occupies this niche, scaling from single-core P1 devices up to multi-core P4/P5 parts. Key features of the P4040NSN7PNC include four e500mc cores with double-precision floating point, a CoreNet fabric that coherently connects the cores, accelerators, and I/O, two 10 GbE plus eight 1 GbE ports, three PCI Express Gen2 controllers, two Serial RapidIO 2.1 interfaces, and a security engine supporting Kasumi, SNOW 3G, and AES. The R3.0 silicon revision reduces power and adds enhanced virtualization assist. The architecture uses 45 nm SOI process technology and a tightly integrated CoreNet coherency fabric that delivers more than 30 Gbps of internal bandwidth. Each e500mc core has 32 KB of L1 instruction cache, 32 KB of L1 data cache, and a 256 KB backside L2 cache, and the four cores share a 2 MB CoreNet platform cache for low-latency access to frequently used data structures. Typical applications for the P4040 include enterprise routers and switches, LTE and 4G base-station baseband processing, network-attached storage controllers, IPsec/SSL security appliances, industrial control and real-time Ethernet gateways, and military/aerospace networking. The combination of four cores at 1.5 GHz with hardware packet parsing makes it especially attractive for control-plane plus data-plane convergence. When designing with this part, allocate a continuous 25 x 25 mm PCB footprint with microvia stack-ups for the 1295-ball HBGA, and provide a low-impedance core voltage rail below 30 mV of ripple. Thermal management is critical - the part draws up to 22 W under full load and requires a heatsink or cold-plate in enclosed chassis. This page synthesizes distributor pricing, lifecycle status, drop-in alternatives within the QorIQ family, and PCB/thermal design notes that go beyond the manufacturer datasheet - making procurement and second-source decisions faster for networking OEMs.

RFQ Liên hệ
P4080NSE1MMB - QorIQ P4 8-Core 1.5GHz PowerPC MPU | NXP
P4080NSE1MMB

P4080NSE1MMB - QorIQ P4 8-Core 1.5GHz PowerPC MPU | NXP

The NXP P4080NSE1MMB is a QorIQ P4 series multi-core PowerPC e500mc microprocessor integrating 8 cores at up to 1.5 GHz in a 1295-pin FCPBGA (37.5x37.5 mm) package, manufactured on a 45 nm process node. The part is the original flagship of the QorIQ P4080 family and is offered in the NSE1 speed grade targeting 1.2 GHz core / 1.5 GHz platform frequency with networking and high-end embedded workloads in mind. A microprocessor (MPU) is an integrated circuit that contains one or more central processing units along with caches, memory controllers, and peripheral interfaces on a single die. The QorIQ P4080 belongs to the hypernym hierarchy MPU -> embedded microprocessor -> multicore communications processor -> system-on-chip, and uses the PowerPC e500mc instruction set architecture which is widely deployed in networking, storage, and aerospace systems that require deterministic performance and long lifecycle support. Key specifications include 8 e500mc cores, 32-bit PowerPC architecture, a 45 nm CMOS process, an integrated L1/L2 cache hierarchy, dual DDR3 memory controllers, multiple 10 GbE and GbE SerDes lanes, PCI Express Gen2, and a wide I/O fabric. The 1295-ball FCBGA package provides high signaling density for the memory, networking, and I/O subsystems while operating across the standard telecommunications temperature range. Architecturally, the P4080 uses a coherent fabric that connects the cores to the CoreNet coherency domain and to on-chip accelerators, allowing high-throughput packet processing and data plane acceleration. The integrated memory controller supports ECC-protected DDR3 with high bandwidth, which is essential for wire-speed processing in routers, switches, and wireless base stations. Typical applications include high-end enterprise routers, multi-service switches, LTE base stations, network-attached storage controllers, and aerospace/defense signal-processing platforms. The P4080NSE1MMB in particular is well suited to designs that need eight threads of e500mc compute with deterministic latency for control and data plane tasks. When designing with this part, allocate sufficient PCB layers for the high-speed SerDes and DDR3 memory interfaces, follow the NXP reference design for power supply sequencing, and validate thermal performance against the package's theta-JA. The 1295-ball FCBGA requires X-ray inspection and precise reflow profiling. This page synthesizes distributor pricing, same-family and cross-family QorIQ alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ
P4080NSE7PNAC - QorIQ P4 8-Core 1.5GHz SoC | NXP | Networking
P4080NSE7PNAC

P4080NSE7PNAC - QorIQ P4 8-Core 1.5GHz SoC | NXP | Networking

The NXP P4080NSE7PNAC is a QorIQ P4 communications processor featuring eight PowerPC e500mc cores running at 1.5 GHz, integrated into a 1295-ball FCBGA package measuring 37.5 x 37.5 mm, targeting high-performance networking, telecom, and military applications. QorIQ is a family of NXP communications processors built on the Power Architecture (PowerPC) instruction set, designed for embedded networking workloads. Within that taxonomy, the P4 series sits at the high end of the original QorIQ lineup, above the P1/P2/P3 tiers and alongside the P5 family. The P4080 was the flagship P4 device when introduced and serves as the foundation for the P4040, P4081, P3, P2, and P1 derivative families. P4080 variants are packaged in a large 1295-ball FCBGA (flip-chip BGA) with a 0.8 mm ball pitch to support the eight-core complex, multi-rail SerDes, and high-bandwidth DDR2/DDR3 memory interface. Key features include eight 32-bit e500mc cores with hardware multithreading, integrated SEC 4.0 cryptographic accelerator for wire-rate IPsec and SSL, dual DDR2/DDR3 controllers with ECC, four 10 Gigabit Ethernet ports plus eight 1 Gigabit Ethernet ports, two PCIe Gen2 controllers, two Serial RapidIO 2.1 interfaces, and an integrated security engine. Operating temperature range is 0 °C to 105 °C (commercial extended). Device speed grade is 1500 MHz core / 1300 MHz platform with a 1.0 V core / 1.3 V supply configuration (denoted by the NS suffix per NXP part numbering). The architecture pairs dual e500mc cores per cluster with a CoreNet coherency switch, delivering non-blocking on-chip bandwidth for packet processing, deep-packet inspection, and control-plane workloads. A dedicated SEC 4.0 block accelerates bulk encryption, freeing CPU cycles for routing, switching, and QoS policy enforcement. Typical applications include multi-service routers and switches, LTE/WCDMA base-station baseband, network-attached storage controllers, defense and aerospace secure routers, and industrial control-plane gateways. The combination of eight cores, integrated cryptography, and multi-protocol SerDes makes P4080 particularly well-suited to secure, line-rate aggregation platforms. When designing with P4080, ensure the PCB accommodates a 37.5 x 37.5 mm FCBGA with controlled-impedance routing for the multi-lane SerDes. Provide sufficient bulk capacitance for the 1.0 V core rail (typical core current can exceed 30 A under load) and follow NXP thermal management guidelines for the FCBGA. This page synthesizes distributor pricing, drop-in P4080 family alternatives, and PCB/application notes not collected in a single block on the NXP product page.

RFQ Liên hệ
P4080NSN1MMB - QorIQ P4080 8-Core 1.5GHz PowerPC MPU | NXP
P4080NSN1MMB

P4080NSN1MMB - QorIQ P4080 8-Core 1.5GHz PowerPC MPU | NXP

The NXP (formerly Freescale) P4080NSN1MMB is a PowerPC e500mc-based 32-bit microprocessor from the QorIQ P4 series, integrating 8 cores running at up to 1.5 GHz in a 1295-pin FCPBGA package measuring 37.5 x 37.5 mm. It is fabricated on a 45 nm process and targets high-throughput, multi-core embedded computing workloads such as networking line cards, base-station DSP offload, multi-service gateways, and industrial control. The MPN suffix decoder (NSN1MM / NSN7MMC variants indicate different speed, security, and temperature grades; refer to the QorIQ P4080 product family datasheet for exact ordering information). QorIQ communications processors are a family of high-performance Power Architecture SoCs designed by NXP/Freescale for wired and wireless infrastructure equipment. They integrate CPU cores, memory controllers, hardware accelerators (SEC, PME, DPAA for packet processing), and multiple SerDes lanes, replacing traditional discrete CPU + ASIC designs with a unified SoC platform. Within the taxonomy, P4080 sits between single-core PowerQUICC predecessors and the higher-end P5020/P5040 family, occupying the multi-core mid-range of the QorIQ P4 series. Key differentiating features include 8 x e500mc cores with hardware hypervisor support, three high-speed memory controllers supporting DDR3 with ECC, integrated 10 Gigabit Ethernet MACs plus multiple Gigabit Ethernet controllers, Data Path Acceleration Architecture (DPAA) for hardware-assisted packet parsing and classification, and a Trust Architecture security engine for encryption offload. Power is supplied across multiple rails at 1.5 V, 1.8 V, 2.5 V, and 3.3 V, typical of high-integration SoCs with mixed-voltage I/O. The architectural sweet spot is parallel control-plane and data-plane processing on a single device: while individual cores run at 1.5 GHz, the real throughput comes from running 8 threads simultaneously, with DPAA moving packets between cores and interfaces without CPU intervention. The e500mc core supports the Power Architecture Book E instruction set with hypervisor-mode virtualization extensions, enabling partitioned software stacks for service-provider routers or industrial safety systems. Typical applications include enterprise and carrier Ethernet routers, LTE / 4G base-station channel cards, multi-service access nodes (MSAN), secure industrial gateways, network-attached storage controllers, and defense / aerospace signal-processing front-ends. Designers also deploy P4080 in software-defined networking (SDN) switches where its packet offload accelerates OpenFlow classification. The wide I/O fan-out (PCIe, SRIO, Ethernet) and large L2 cache footprint make it a versatile engineering point in the broader NXP QorIQ family. When designing with this device, allocate the large 37.5 x 37.5 mm BGA footprint with a minimum 8-layer PCB stack-up; thermal management must account for 25-30 W typical SoC power. Use the CodeWarrior / Linux BSP and u-boot from NXP for early bring-up, and verify DDR3 topology against the P4080 QorIQ hardware specification. Cross-reference the P4080 product family datasheet (referenced below) for the exact pin map and SerDes lane assignments before committing layout. This page synthesizes distributor pricing, drop-in QorIQ family alternatives, and practical hardware design notes not found in any single manufacturer document.

RFQ Liên hệ
P4080NSN1NNB - QorIQ P4 8-Core 1.2GHz PowerPC MPU | NXP
P4080NSN1NNB

P4080NSN1NNB - QorIQ P4 8-Core 1.2GHz PowerPC MPU | NXP

The NXP P4080NSN1NNB is a QorIQ P4 series PowerPC e500mc microprocessor (MPU) integrating 8 cores at 1.2 GHz in a 1295-pin FCPBGA (37.5x37.5 mm) package, manufactured on a 45 nm process. It targets high-performance networking, telecom, and industrial control applications where multi-core compute density and rich I/O are required. A microprocessor (MPU) is an integrated circuit that integrates one or more processor cores, caches, memory controllers, and peripheral interfaces onto a single die. The QorIQ P4080 belongs to the Power Architecture (PowerPC e500mc) family, sitting in the taxonomy of embedded communication processors that combine general-purpose compute with hardware acceleration for packet processing, security, and datapath offload. Key features include 8 e500mc cores with hardware multithreading support, dual DDR2/DDR3 memory controllers with ECC, integrated SerDes lanes supporting SGMII/XAUI/PCIe, hardware cryptography accelerators, and a fabric interconnect. The P4080 supports 1.5V/1.8V/2.5V/3.3V mixed-voltage I/O and operates from a 0.95 V core supply. Architecturally, the P4080 uses a hierarchical cache topology with private L1 per core and a shared L2, plus a CoreNet coherency fabric linking cores, memory controllers, and the platform subsystem. This delivers strong multi-thread performance while maintaining deterministic behavior for control-plane tasks. Typical applications include multi-service routers, LTE baseband processing, network-attached storage controllers, secure VPN gateways, and industrial PLC controllers. The wide SerDes lane count makes the P4080 suitable for systems that aggregate multiple 1G/10G Ethernet ports without external PHY complexity. When designing with this device, ensure the 37.5x37.5 mm FCPBGA land pattern uses microvia PCB stackup with matched-length SerDes routing. Power sequencing must follow the 0.95 V core / 1.5 V DDR / I/O voltage order in the reference manual to avoid latch-up. This page synthesizes distributor pricing, drop-in same-family QorIQ alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ
P4080NSN1PNB - QorIQ P4080 8-Core 1.5GHz e500mc MPU | NXP Freescale
P4080NSN1PNB

P4080NSN1PNB - QorIQ P4080 8-Core 1.5GHz e500mc MPU | NXP Freescale

The NXP (formerly Freescale) P4080NSN1PNB is a multi-core PowerPC microprocessor in the QorIQ P4 family featuring eight e500mc cores running at up to 1.5 GHz, manufactured on a 45 nm process and housed in a 1295-pin FCBGA (37.5 x 37.5 mm) package with 1.5V/1.8V/2.5V/3.3V supply rails. It is the flagship product of the original QorIQ generation and the architecture foundation from which the P5, P3, P2 and P1 families were derived. The device also spawned the slimmed-down P4040 (4-core) and security-enhanced P4081 variants. What is a QorIQ communications processor? A QorIQ microprocessor is a high-performance Power-Architecture-based system-on-chip designed by NXP (originally Freescale) for networking, telecom, and aerospace infrastructure. It sits in the hierarchy MPU -> microprocessor -> communications processor -> SoC, combining CPU cores, cache hierarchy, networking accelerators, and serial interfaces on a single die. Compared to a general-purpose MPU, a QorIQ P4080 integrates packet-processing engines, multiple 10 Gigabit Ethernet MACs, and DPAA-style queue management, eliminating the need for an external traffic manager. Key features of the P4080NSN1PNB include a 32-bit Power Architecture e500mc core complex with eight superscalar, out-of-order threads, hardware virtualization (QorIQ trust architecture), dual 32 KB I/D L1 caches per core, a shared 2 MB L2, and Trust 1.1 secure-boot support. The device also exposes four 10-Gigabit Ethernet controllers plus eight 1-Gigabit controllers, three PCIe Gen2 controllers, four Serial RapidIO Gen2 ports, and two SATA 2.0 controllers, making it a true platform-level SoC for embedded data-plane workloads. Typical applications include enterprise routers, multi-service edge platforms, LTE/WCDMA baseband compute, network-attached storage controllers, aerospace flight-control and mission-computing systems, and high-density line cards for chassis-based switches. Multiple temperature grades are available; the NSN1 letter code denotes a specific speed and commercial-grade bin supplied in tray packaging. When designing with this part, board designers must allocate a 37.5 x 37.5 mm land pattern, provide at least five independent voltage rails, follow NXP's stack-up and DDR3 routing guidelines, and budget 6-12 W typical CPU-only dissipation with the thermal enhanced lid variant. The package pin count (1295) and BGA pitch make this part appropriate for high-density, professionally-laid PCBs rather than hobbyist prototyping. This page synthesises distributor inventory, drop-in same-family alternatives, and thermal/pin-compatibility design notes that go beyond what the manufacturer datasheet alone provides.

RFQ Liên hệ
P4080NSN7PNC - QorIQ 8-Core 1.5GHz SoC FCBGA-1295 | NXP
P4080NSN7PNC

P4080NSN7PNC - QorIQ 8-Core 1.5GHz SoC FCBGA-1295 | NXP

The NXP P4080NSN7PNC is a QorIQ P4080 multi-core communications processor with eight Power Architecture e500mc cores running at up to 1.5 GHz, packaged in a 1295-ball FCBGA (37.5 x 37.5 mm). Built on a 45 nm process, it integrates DDR2/DDR3 memory controllers with ECC, multiple 1 GbE and 10 GbE interfaces, PCIe, Serial RapidIO (SRIO), and security acceleration for high-performance networking workloads. A QorIQ communications processor is a system-on-chip (SoC) designed for embedded networking, telecom, and industrial control. It combines general-purpose CPU cores with hardware accelerators and high-speed serial interfaces in a single BGA package, occupying the role of a single-board computer-on-chip within a larger line card or control plane design. The P4080 family established the QorIQ P-series hierarchy from which the P5, P3, P2, and P1 derivatives were subsequently derived. Key features include eight e500mc cores with hardware multithreading, a 32 KB instruction and 32 KB data L1 cache per core, a 2 MB shared L2 cache, a triple-redundant CoreNet fabric, DDR2/3 controllers with ECC supporting up to 4 GB of addressable memory, integrated security engines, and four SGMII 1 GbE plus two XAUI/XFI 10 GbE MACs. The 1295-pin FCBGA package provides the bandwidth required to route the multiple SerDes lanes and DDR channels without external switching. Architecturally, the P4080NSN7PNC uses CoreNet coherency fabric to keep L2 caches coherent across all eight cores, allowing symmetric multiprocessing under standard Linux distributions. Operating voltage rails are supplied at 1.5 V, 1.8 V, 2.5 V, and 3.3 V; core frequency is 1.5 GHz at the N7 speed bin and 1.3 GHz at the lower bin. The -40 to 105 °C industrial junction range allows deployment in unconditioned outdoor enclosures and base-station chassis. Typical applications include high-end routers and switches, LTE base-station baseband processing, multi-service edge gateways, industrial control planes, and defense/aerospace communications. The combination of eight cores and 10 GbE MACs also makes the part useful as a control-plane processor in modular line cards alongside dedicated network ASICs. When designing with this device, allocate a minimum 6-layer PCB with continuous ground planes beneath the BGA and matched-length routing for DDR3, SRIO, and 10 GbE lanes. The package requires a high-layer-count substrate and a controlled-impedance stack-up; thermal management should use a heat spreader or heatsink rated for at least 15 W typical dissipation. This page synthesizes distributor pricing, lifecycle status, and application context not found in the manufacturer datasheet, plus drop-in alternative guidance for P4080 family variants.

RFQ Liên hệ
P4080NXE7PNAC - QorIQ 8-Core 1.5GHz SoC MPU | NXP
P4080NXE7PNAC

P4080NXE7PNAC - QorIQ 8-Core 1.5GHz SoC MPU | NXP

The NXP P4080NXE7PNAC is a QorIQ P4080 32-bit Power Architecture system-on-chip (SoC) microprocessor integrating eight e500mc cores running at up to 1.5GHz, housed in a 1295-pin FCBGA (37.5x37.5 mm) package. As the flagship of the QorIQ P-series at launch, the P4080 combines eight high-performance cores with a hierarchical CoreNet interconnect fabric and a 2 MB shared L3 platform cache, delivering multi-core throughput for networking, telecom, and embedded datacenter workloads while operating from a -40C to +105C industrial temperature range. A microprocessor (MPU) is a single-chip CPU that integrates the central processing unit, memory controllers, and peripheral interfaces on one die. The QorIQ P4 family extends the classic PowerPC e500mc architecture into a heterogeneous multi-core platform with hardware virtualization (user/supervisor/hypervisor privilege levels), secure boot, ECC-protected DDR2/3 memory, and high-speed serial interfaces including 1/10GbE, PCIe, and Serial RapidIO. These functions collectively position the P4080 in the broader taxonomy: microprocessor -> 32-bit embedded processor -> multi-core SoC -> networking/datacom SoC. Key features of the P4080NXE7PNAC include eight e500mc cores with 32 KB instruction and 32 KB data L1 caches per core plus a private 128 KB L2, 2 MB of shared L3 CoreNet platform cache, DDR2/3 memory controller with ECC supporting up to 1333 MT/s, two 10 Gigabit Ethernet MACs, eight 1 Gigabit Ethernet MACs, three PCIe Gen2 controllers, two Serial RapidIO interfaces, hardware-accelerated SEC for cryptography, and four TDM interfaces. The 45 nm CMOS process and 1.5 GHz core frequency deliver up to 38.4 GMIPS aggregate throughput. Architecturally, the P4080 employs a coherent CoreNet fabric that lets all eight cores share the platform cache and peripherals with low-latency snoop support. The triple-level instruction translation (user/supervisor/hypervisor) enables KVM-style full virtualization for running multiple OS instances. The integrated SEC (Security Engine) provides hardware-accelerated AES, 3DES, SHA, RSA, and ECC, offloading crypto from the cores. Typical applications include multi-service edge routers, enterprise and SMB switches, network security appliances (firewall/IPSec), LTE/WiMAX baseband processing, control-plane and data-plane cards on ATCA/AMC platforms, and industrial control with deterministic Ethernet. The wide operating temperature also makes it suitable for ruggedized and military-grade networking equipment. When designing with this part, allocate a minimum 8-layer PCB stack-up with continuous GND planes under the BGA to control impedance for 1/10GbE and PCIe SERDES. Decouple each core voltage domain with bulk plus high-frequency MLCCs placed within 5 mm of the balls, and follow NXP's AN4105 layout guide for the FCBGA escape. The R3 silicon revision noted in the datasheet reflects NXP's bug-fix revision; verify firmware/RTL compatibility before swapping R3 for R2 silicon. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Liên hệ
P4081NSE7KKC - QorIQ P4 8-Core 1.2GHz PowerPC SoC | NXP
P4081NSE7KKC

P4081NSE7KKC - QorIQ P4 8-Core 1.2GHz PowerPC SoC | NXP

The NXP P4081NSE7KKC is a QorIQ P4 family multi-core communications microprocessor integrating eight PowerPC e500mc cores running at up to 1.2 GHz, packaged in a 1295-ball FCBGA (37.5x37.5 mm). It is a 32-bit SoC targeting high-performance networking, wireless infrastructure, and data-plane workloads that require parallel packet processing. A multi-core communications processor (often called an application processor or SoC) is a single silicon device that combines several CPU cores, coherent interconnect fabric, memory controllers, and high-speed serial I/O (SerDes) interfaces. Within the system hierarchy it sits above simple microcontrollers and below dedicated ASIC/FPGA accelerators, bridging general-purpose control and line-rate packet handling in a single chip. Key features include eight e500mc cores with hardware-assisted multithreading support, dual DDR2/DDR3 memory controllers with ECC, integrated security engine (SEC 4.0) for IPSec/SSL offload, two 10 Gigabit Ethernet MACs plus eight 1 Gigabit Ethernet MACs, multiple PCIe and Serial RapidIO (SRIO) controllers, and a coherency fabric that scales coherently across all eight cores. The variant suffix "SE7KKC" denotes the security-enabled, 1.2 GHz speed grade. The architecture pairs the e500mc cores with a CoreNet coherency fabric, allowing shared-memory multiprocessing with deterministic memory access. Hardware queues, buffer managers, and pattern-match accelerators offload packet classification, freeing the cores for control-plane and exception handling. This balanced design keeps power consumption in a range that can be cooled with a heatsink, unlike higher-frequency parts in the family. Typical applications include multi-service routers, LTE base-station baseband, enterprise switches, network-attached storage controllers, and industrial control planes with deterministic Ethernet. It also serves as the host processor in aerospace and defense packet-processing subsystems requiring long-life silicon and ECC-protected memory. When designing with the P4081NSE7KKC, follow NXP's reference PCB layout for the FCBGA to maintain signal integrity on SerDes lanes. Provide matched impedance for DDR2/DDR3 traces and ensure thermal design accounts for worst-case power across all cores active. The 1295-ball FCBGA requires 12-layer or thicker stack-up. This page synthesizes distributor pricing, lifecycle status, same-package alternatives and practical design notes not found in the manufacturer datasheet.

RFQ Liên hệ
P4081NSN7KKC - QorIQ P4 8-Core 1.2GHz PowerPC MPU | NXP
P4081NSN7KKC

P4081NSN7KKC - QorIQ P4 8-Core 1.2GHz PowerPC MPU | NXP

The NXP (formerly Freescale) P4081NSN7KKC is a QorIQ P4-series communications microprocessor built on the PowerPC e500mc core, delivering eight 32-bit cores running at up to 1.2 GHz in a 1295-ball FCBGA (37.5 x 37.5 mm) package. The 'NSN7' designator marks it as the 1.0 GHz core / 1000 MHz speed grade variant (no security, industrial qualification), while 'KKC' identifies the FCBGA package and reel packaging option. This part belongs to the QorIQ P4 communications processor family, which sits in the broader taxonomy of embedded microprocessors -> multicore MPU -> communications processor -> system-on-chip. QorIQ P4 parts target high-throughput networking, industrial control, and aerospace/defense workloads where deterministic multicore compute is required. Key features include eight PowerPC e500mc cores with 32-bit datapath, hardware virtualization and DPAA (Data Path Acceleration Architecture) for packet processing, integrated DDR2/DDR3 memory controllers with ECC, eight 1 Gbps Ethernet MACs plus a single 10 Gbps interface, SerDes lanes, and PCI Express Gen2 controllers. The device also integrates secure-boot and Trust Architecture support when configured with the security fuse option (a different ordering code suffix). Typical applications include multiservice routers, LTE/eNodeB baseband cards, industrial firewalls, defense and aerospace signal-processing subsystems, and high-end network-attached storage controllers. The eight-core layout also makes it attractive for parallelized control-plane workloads and software-defined networking (SDN) data planes. When designing with this device, ensure your PCB accommodates the 37.5 x 37.5 mm FCBGA land pattern with matched-impedance SerDes routing, and provide a thermal solution sized for the maximum TDP at sustained core load. Use NXP's CodeWarrior or GNU toolchain with the appropriate e500mc SYSV ABI for software bring-up.

RFQ Liên hệ
P4081NSN7MMC - 8-Core QorIQ P4 1.2GHz SoC | NXP Semiconductors
P4081NSN7MMC

P4081NSN7MMC - 8-Core QorIQ P4 1.2GHz SoC | NXP Semiconductors

The NXP Semiconductors P4081NSN7MMC is an 8-core 32-bit Power Architecture System-on-Chip (SoC) from the QorIQ P4 family, operating at up to 1.2 GHz per core, integrated in a 1295-ball FCBGA package measuring 37.5 x 37.5 mm. It implements the PowerPC e500mc core, supports DDR2/DDR3 memory with ECC, and integrates packet-oriented I/O including 1/10 GbE, PCIe and Serial RapidIO (SRIO). The device is qualified for the 0°C to 105°C commercial operating range. A QorIQ communications SoC is a high-performance multi-core processor designed for networking, telecom, and embedded data-plane workloads where deterministic throughput, hardware acceleration, and rich I/O are equally important to raw CPU frequency. Within the power-management taxonomy the P4081 sits at the intersection of MPU (microprocessor unit), multicore SoC, and communications platform. The QorIQ family as a whole replaced the legacy PowerQUICC line and is positioned between general-purpose application processors and dedicated network ASICs. Key features of the P4081 include eight e500mc cores with hardware hypervisor and virtualization support, dedicated L2 cache, a 64-bit DDR2/3 memory controller with ECC, multiple GbE and 10 Gigabit Ethernet MACs, PCIe Gen1/Gen2, and Serial RapidIO 1.3 interfaces. The chip is fabricated in a 45 nm CMOS process and requires 1.5 V, 1.8 V, 2.5 V and 3.3 V power rails. The combination of dual-cluster quad-core topology and a hardware-accelerated datapath makes it well suited to control-plane and data-plane workloads running concurrently. Architecturally the P4081 places cores, L2 cache, the memory controller and the network/IO fabric on a single die; the Corenet coherent fabric allows each core to share memory and accelerator resources without software coherence management overhead. This tightly integrated SoC design removes the chip-to-chip latency of multi-chip designs used in earlier PowerPC platforms. Typical applications of the P4081NSN7MMC include enterprise routers and switches, multi-service gateways, wireless baseband controllers, network security appliances, and industrial control or storage controllers that require both high compute density and rich packet-oriented IO. When designing with this device, allocate the largest copper plane to the 1.5 V and 1.8 V cores because the 45 nm process is sensitive to supply noise; a 12+ layer PCB with buried capacitance is recommended for layout, and the BGA requires a socket or direct solder attach. This page synthesizes distributor availability, supply-chain status, and pin-compatible QorIQ family variants not consolidated in the original NXP datasheet, giving you a one-stop reference for sourcing and replacement decisions.

RFQ Liên hệ
P5010NSE1TNB - QorIQ P5 2.0GHz 64-Bit PowerPC e5500 MPU | NXP
P5010NSE1TNB

P5010NSE1TNB - QorIQ P5 2.0GHz 64-Bit PowerPC e5500 MPU | NXP

The NXP P5010NSE1TNB is a PowerPC e5500 microprocessor in the QorIQ P5 family, integrating a single 64-bit e5500 core running at 2.0 GHz in a 1295-ball FCPBGA (37.5x37.5 mm) package. Designed for high-performance embedded applications, it combines out-of-order execution, hardware virtualization support, and an integrated memory controller with high-bandwidth I/O peripherals on a single SoC. The "NSE1" speed-grade designation indicates the 1800/1333 MHz core/DDR frequency bin, and "TNB" refers to the standard-temperature FCPBGA package variant. A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computer system, executing program instructions and managing data flow. The PowerPC e5500 architecture is a 64-bit, superscalar, out-of-order implementation originally derived from Freescale's e500 lineage used across NXP QorIQ networking and industrial platforms. This product family sits within the broader hierarchy of microprocessor -> embedded processor -> SoC (System-on-Chip) -> semiconductor, optimized for network packet processing, secure routing, and industrial control workloads. Key features of the P5010NSE1TNB include a single e5500 core with double-precision floating point, hardware virtualization for partitioned OS environments, an integrated DDR3/DDR3L memory controller, multiple Gigabit Ethernet interfaces, PCI Express Gen 2 controllers, and integrated security engines. The wide I/O fabric reduces external component count, allowing compact board designs for space-constrained routers and embedded systems. The P5010NSE1TNB leverages NXP's e5500 core architecture, which combines dual-issue superscalar dispatch with out-of-order completion and AltiVec-compatible SIMD media processing. This micro-architectural depth delivers significantly higher instructions-per-clock than in-order alternatives, while integrated L2 cache and coherency logic keep memory subsystem latency low. The platform's Trusted Execution and Secure Boot features are designed for networking equipment where hardware root-of-trust is mandatory. This MPU is commonly deployed in industrial routers and secure gateways, factory automation controllers, defense and aerospace embedded systems, networked storage controllers, and single-board computing platforms. The 2.0 GHz operating point balances throughput and thermal envelope for fanless or low-airflow industrial chassis. Standard temperature grade makes it suited for commercial and industrial settings, while extended-temperature variants may be required for fully ruggedized deployments. Design considerations include proper thermal management via the exposed-die FCPBGA package, signal-integrity routing for DDR3 memory traces, and decoupling strategy for the multiple supply rails (core, I/O, DDR PHY, and PLL). Engineers should review the hardware specifications for clocking, reset, and configuration of the on-chip SerDes lanes. This page synthesizes distributor pricing, parameter data, and cross-reference information for the P5010NSE1TNB beyond what is offered in the manufacturer datasheet summary, providing engineer-oriented selection guidance.

RFQ Liên hệ
P5010NSE1TNB557 - QorIQ P5 2GHz e5500 MPU | 1295-FCPBGA
P5010NSE1TNB557

P5010NSE1TNB557 - QorIQ P5 2GHz e5500 MPU | 1295-FCPBGA

The NXP P5010NSE1TNB557 is a QorIQ P5 series PowerPC e5500 microprocessor integrating a single 64-bit core running up to 2.0 GHz, packaged in a 1295-ball FCPBGA (37.5 x 37.5 mm). It is built on a high-performance CMOS process and targets networking, telecom, and embedded compute platforms requiring deterministic throughput with a familiar Power Architecture ISA. The device ships in a standard temperature grade and is sold by Rochester Electronics as factory-traceable stock of the original Freescale/NXP silicon. A microprocessor (MPU) is the central execution unit of a computing system, fetching and decoding instructions, performing arithmetic and logic operations, and orchestrating data movement between memory and peripherals. The QorIQ P5 family sits in the broader taxonomy of PowerPC e5500 cores -> embedded microprocessors -> microcontrollers and MPUs -> integrated circuits -> semiconductors, and is widely used in wired/wireless infrastructure where per-watt performance and rich I/O matter. Key differentiating features of the P5010 include a 64-bit data path, hardware virtualization support, integrated security acceleration (SEC), and the high-bandwidth CoreNet fabric that links the core to on-chip accelerators. The 1295-ball FCPBGA package provides the dense signaling required to expose multiple 10 GbE-class SerDes lanes, DDR3/3L memory controllers, and PCI Express Gen 2 interfaces simultaneously, enabling single-chip system designs. Architecturally, the e5500 core extends the classic Power Architecture with out-of-order execution hints, larger caches, and symmetric multiprocessing support, while the platform layer adds a Data Path Acceleration Architecture (DPAA) for packet parsing, queueing, and crypto offload. This combination makes the P5010 well suited for line-card controllers, mid-range routers, and industrial gateways where deterministic latency and protocol processing coexist. Typical applications include enterprise and industrial networking equipment, telecom base stations and edge compute nodes, secure industrial control systems, single-board compute modules for defense and aerospace, and protocol-aware gateway designs. The wide I/O complement also supports storage controllers and TSN-enabled industrial Ethernet endpoints. When designing with this device, ensure the PCB can dissipate the thermal envelope of a 2.0 GHz e5500 core and follow NXP's reference schematics for DDR3L layout, SerDes routing, and core voltage rail decoupling. Firmware must initialize the RCW (Reset Configuration Word) and SERDES reference clocks before boot, and stock firmware for the P5 family is available from NXP and Rochester Electronics as factory-original parts. This page synthesizes distributor pricing, drop-in same-package alternatives, and design references that complement the manufacturer datasheet and reference manual.

RFQ Liên hệ
P5010NSE7MMB - QorIQ P5 2.0GHz SoC | NXP Semiconductors
P5010NSE7MMB

P5010NSE7MMB - QorIQ P5 2.0GHz SoC | NXP Semiconductors

The NXP Semiconductors P5010NSE7MMB is a QorIQ P5-series communications processor built on 64-bit Power Architecture technology (e5500 core), integrating a single CPU core operating up to 2.0 GHz, hardware-accelerated security (SEC), packet processing, and high-speed serial interfaces (PCIe, Serial RapidIO, Gigabit Ethernet). It is housed in a 1295-ball FC-PBGA (FCBGA) package measuring 37.5 mm x 37.5 mm and is specified for the 0 to 105C ambient temperature range. The device is fabricated in CMOS technology and targets enterprise and service-provider networking equipment such as routers, switches, and security appliances. A QorIQ communications processor is a system-on-chip (SoC) designed for embedded networking and industrial control workloads. The QorIQ family is built on Power Architecture technology and spans entry-level single-core parts up to multi-core data-plane processors; the P5 series sits in the mid-tier with integrated datapath acceleration. Within the broader taxonomy, P5010 belongs to: communications processor -> embedded processor -> microprocessor -> integrated circuit -> semiconductor. This hierarchical context is what distinguishes an SoC from a generic microcontroller and explains its role in wired/wireless infrastructure. Key features of the P5010NSE7MMB include a 64-bit e5500 Power Architecture core with integrated L1/L2 caches, dedicated hardware engines for pattern matching, queue management, encryption (SEC engine for IPsec/SSL), and RapidIO, plus support for DDR3 memory with ECC. The integrated datapath acceleration block offloads packet classification and QoS functions from the CPU, enabling wire-speed throughput on multi-Gigabit interfaces. According to the NXP QorIQ P5010/P5020 product brief, the e5500 core delivers higher instructions-per-clock than previous-generation e500 cores while retaining software compatibility. The architecture pairs the e5500 core with a high-bandwidth coherent interconnect that feeds multiple integrated controllers, including SerDes lanes used to configure PCIe, Serial RapidIO (SRIO), and 1G/2.5G Ethernet PHYs. The SoC's nominal core voltage is 1.00 V (range 0.95 V to 1.05 V) with separate rails for the DDR3 I/O and SerDes analog blocks; careful power-rail sequencing is required during board bring-up. The 1295-ball FC-PBGA package uses flip-chip land pads on the bottom surface and demands a matched-impedance multilayer PCB with controlled-via stitching for the core's high-speed signals. Typical applications include enterprise routers, multiservice gateways, line cards for chassis-based switches, network-attached storage controllers, industrial control and automation hosts, and secure communication appliances that benefit from on-chip SEC acceleration. The P5010NSE7MMB's 0 to 105C temperature range allows deployment in thermally constrained networking shelves where ambient cooling is provided by forced airflow rather than heatsinks. When designing with this part, pay close attention to DDR3 trace length matching (within the limits stated in the NXP hardware design guide), SerDes reference-clock jitter, and the in-package thermal dissipation of the 37.5 mm BGA - a multi-layer PCB with inner ground/power planes is essential for the high-current transient response demanded by the core and SerDes blocks. This page synthesizes distributor pricing, verified specifications, drop-in alternatives within the QorIQ family, and design notes not found in the manufacturer datasheet, giving embedded designers a single reference for evaluating the P5010NSE7MMB against current alternatives.

RFQ Liên hệ
P5010NSE7TNB557-FR - QorIQ P5 1.8GHz PowerPC e5500 MPU | NXP
P5010NSE7TNB557-FR

P5010NSE7TNB557-FR - QorIQ P5 1.8GHz PowerPC e5500 MPU | NXP

The NXP P5010NSE7TNB557-FR is a PowerPC e5500 microprocessor IC in the QorIQ P5 communications processor family, integrating 1 core operating up to 1.8 GHz on a 64-bit architecture, housed in a 1295-ball FCPBGA (37.5x37.5 mm) package. Designed for high-performance embedded networking and communications workloads, it combines a high-frequency e5500 core with integrated platform peripherals used in routers, switches, and security appliances. A QorIQ communications processor is a system-on-chip (SoC) that combines one or more Power Architecture CPU cores with networking-specific accelerators, security engines, and high-speed I/O, sitting between general-purpose CPUs and dedicated ASICs in the broader hierarchy of embedded processors. The P5 series specifically targets mid-range routing, switching, and unified threat management (UTM) applications where single-thread performance and high integration reduce bill-of-materials cost and board area. Key features include a 64-bit PowerPC e5500 core running up to 1.8 GHz, integrated high-speed SerDes lanes for 10 GbE and PCI Express connectivity, hardware-accelerated security engines, and the FCBGA-1295 (37.5x37.5) package with high-density interconnect for the multi-lane SerDes interfaces. The device is part of NXP's communications processor portfolio originally developed by Freescale, with the -FR suffix indicating a specific tape-and-reel packaging variant. From an architectural standpoint, the e5500 core supports hypervisor-aware virtualization, hardware page table translation, and out-of-order execution for single-thread performance critical to control-plane packet processing. The integrated SerDes and queue manager reduce external PHY count and simplify traffic management, while the high-bandwidth memory controller supports DDR3/DDR3L with ECC for high-reliability networking systems. Typical applications include enterprise routers, industrial gateways, network-attached storage (NAS) controllers, military/aerospace secure communications, and single-board computers for edge networking. The combination of single-core simplicity and integrated peripherals makes it well suited to platforms where deterministic performance matters more than raw core count. When designing with this device, plan thermal dissipation carefully: at 1.8 GHz under heavy load the FCBGA-1295 dissipates substantial power and requires a heatsink or thermal interface material rated for the expected ambient temperature. PCB layout must follow NXP's high-speed design guide for the SerDes lanes to meet signal-integrity margins. This page synthesizes distributor pricing, package details, and practical application notes for the P5010NSE7TNB557-FR beyond what the manufacturer product page alone provides.

RFQ Liên hệ
P5010NSN1MMB - QorIQ P5 e5500 2.0GHz 64-bit MPU | NXP Semiconductors
P5010NSN1MMB

P5010NSN1MMB - QorIQ P5 e5500 2.0GHz 64-bit MPU | NXP Semiconductors

The NXP Semiconductors P5010NSN1MMB is a PowerPC e5500-based microprocessor IC from the QorIQ P5 communications platform family, integrating a single 64-bit core running at 2.0 GHz in a 1295-ball flip-chip plastic BGA (FCPBGA) package measuring 37.5 mm × 37.5 mm. The part belongs to NXP's high-end embedded communications processor family, serving as the system-on-chip engine for wired and wireless infrastructure, industrial control, and defense/aerospace compute applications. A microprocessor (MPU) is an integrated circuit that contains one or more central processing units implemented as a single silicon die, designed to fetch, decode, and execute general-purpose instructions while orchestrating peripherals over bus fabrics and memory controllers. MPUs occupy the top of the embedded compute hierarchy (microprocessor -> MPU/SoC -> embedded processor -> communication processor), and QorIQ P5 devices in particular target enterprise and carrier-grade workloads where 64-bit address-space performance, hardware packet acceleration, and extended operating-temperature envelopes matter far more than instruction-level power efficiency. Key differentiating characteristics of the P5010NSN1MMB include the e5500 64-bit dual-issue superscalar Power architecture core, integrated high-bandwidth memory and I/O controllers, on-chip SerDes lanes for backplane interfaces, and 2.0 GHz maximum operating frequency. The 1295-ball FCPBGA exposes the full DDR controller, multiple Ethernet MACs, PCIe lanes, and other high-speed serial interfaces needed to drop into a top-of-rack switch, radio-network controller, or secure industrial gateway without external protocol bridges. Application fit includes Layer 2/3 enterprise switches, router control planes, secure VPN/IPsec gateways, industrial automation controllers, and defense embedded compute modules. When designing with this part, special attention must be paid to PCB stack-up for the FCPBGA, thermal dissipation, and power-rail sequencing - the e5500 core will not tolerate spec-violating supply ramps. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical sourcing notes not collected in one place in the NXP product brief.

RFQ Liên hệ
P5010NSN1QMB - QorIQ P5010 SoC, 64-bit Power Arch, 2.0GHz, 1295-FCBGA | NXP
P5010NSN1QMB

P5010NSN1QMB - QorIQ P5010 SoC, 64-bit Power Arch, 2.0GHz, 1295-FCBGA | NXP

The NXP P5010NSN1QMB is a QorIQ single-core 64-bit Power Architecture system-on-chip (SoC) running at up to 2.0 GHz, housed in a 1295-pin FCBGA (37.5x37.5 mm) package. The device supports DDR3 memory with hardware ECC, integrated PCI Express Gen 2 controllers, dual Gigabit Ethernet, Serial RapidIO (SRIO), and a hardware acceleration engine for data-path offload. The part is qualified for 0 to 105C standard temperature operation. A QorIQ communications processor is a multi-core Power Architecture SoC family from NXP designed for networking, wireless base-station, and embedded infrastructure applications. QorIQ P-series parts sit in the system hierarchy as application processors -> communications processors -> SoC -> NXP QorIQ family, integrating CPU cores, memory controllers, high-speed SerDes, packet-processing accelerators, and peripheral IP into a single chip to reduce board area and BOM. Key features include one e5500 core built on Power Architecture technology, 32 KB I-cache and 32 KB D-cache per core, a shared 1 MB L2 frontside cache, the DPAA (Data Path Acceleration Architecture) engine, on-chip SEC crypto engine, and multiple high-speed SerDes lanes configurable as PCIe, SRIO, or Aurora. The 1295-FCBGA package exposes the full complement of SerDes lanes and external memory interfaces required for high-end networking line cards. The P5010 is architected around a coherent SMP fabric connecting the e5500 core to memory and I/O controllers. The e5500 core is dual-issue, out-of-order, and supports hardware virtualization, hypervisor extensions, and AltiVec SIMD-style DSP operations. Integrated DPAA provides packet parsing, queue management, and buffer management without consuming CPU cycles, freeing the core for control-plane and exception processing. Typical applications include enterprise routing and switching line cards, wireless baseband processing (3G/4G small-cell), network-attached storage controllers, industrial embedded control with deterministic networking, and secure gateway appliances. The standard temperature grade (0 to 105C) targets commercial and industrial networking equipment rather than fully automotive environments. When designing with the P5010, route DDR3 traces with matched length and 50-ohm controlled impedance. Use a multi-layer PCB with dedicated ground planes adjacent to the high-speed SerDes lanes. Provide a heatsink or thermal interface to manage the 30W+ TDP at full 2.0 GHz operation, and follow NXP layout guidelines for the FCBGA substrate. This page synthesizes distributor stock, parametric proximity to others in the same package family, and practical design guidance not found in the manufacturer datasheet, giving engineers an actionable reference alongside the official document.

RFQ Liên hệ
P5010NSN1QMB557 - QorIQ P5 2GHz PowerPC e5500 SoC | NXP
P5010NSN1QMB557

P5010NSN1QMB557 - QorIQ P5 2GHz PowerPC e5500 SoC | NXP

The NXP P5010NSN1QMB557 is a QorIQ P5 communications processor built on the Power Architecture e5500 core, delivering 64-bit processing at 2.0 GHz with a single core in a 1295-ball FCBGA (37.5 x 37.5 mm) package. The SoC targets enterprise switching, routing, and unified threat management workloads where deterministic single-thread throughput and large L2 cache matter more than multi-core counts. A microprocessor (MPU) is an integrated circuit that contains a central processing unit, cache hierarchy, memory controllers, and a wide peripheral set on a single die. QorIQ P-series parts belong to the Power Architecture ecosystem - a family of 64-bit embedded processors that bridge networking, storage, and industrial control. Within the broader taxonomy they sit under microprocessors -> integrated circuits -> semiconductors, sitting alongside ARM-based application processors and x86 server CPUs but optimized for packet processing and deterministic latency. Key features of the P5010 include the e5500 64-bit core with hardware virtualization, dual DDR3 memory controllers with ECC, integrated security engines (SEC), multiple RGMII/SGMII/XAUI / PCIe / SATA / USB interfaces, and on-chip SRAM for low-latency lookups. The platform is qualified for 0C to 105C ambient operation, suiting NEBS-style telecom chassis as well as fan-cooled industrial gateways. The 1295-FCPBGA provides the ball pitch and pin-out needed for multilayer PCB designs with matched impedance SERDES routing. Architecturally, the e5500 pipeline executes up to two instructions per cycle and supports out-of-order completion with branch prediction, while the platform incorporates CorDA acceleration via hardware assists for queue management and cryptography. The SEC 4.0 block accelerates DES/3DES/AES/SHA and public-key algorithms, offloading security processing from the core for line-rate IPSec and SSL. Typical applications include enterprise routers and switches, network security appliances (firewall, UTM), wireless base station controllers, storage controllers, and industrial control with deterministic networking. The combination of single high-frequency core plus ECC memory and SEC acceleration makes it ideal for low-latency control plane code. Design consideration: the FCBGA requires 8-layer minimum PCB with matched-length SERDES lanes; thermal design must keep junction below 105C with top-side heatsink plus thermal vias. Ensure firmware (U-Boot, Linux BSP) is available for your derivative before committing to layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the bare NXP datasheet, giving procurement and engineering a single reference for the P5010NSN1QMB557.

RFQ Liên hệ