Vi điều khiển

Sản phẩm (20.000+)

P2041NSN1PNB - QorIQ Quad-Core 1.5GHz MPU | NXP Semiconductors
P2041NSN1PNB

P2041NSN1PNB - QorIQ Quad-Core 1.5GHz MPU | NXP Semiconductors

The NXP Semiconductors (formerly Freescale) P2041NSN1PNB is a QorIQ P2041 quad-core microprocessor built on Power Architecture e500mc cores, operating at up to 1.5 GHz, in a 780-ball FC-PBGA package. It targets the low-end to mid-range quad-core networking and communications market, bringing architectural features from the high-end P4 platform into a lower-power envelope suitable for branch routers, control plane processors, and secure gateway appliances. A microprocessor (MPU) is a single-chip CPU that integrates arithmetic logic, control unit, on-chip caches, memory management, and external interfaces (PCIe, Ethernet, DDR memory controller, serial interfaces) onto one die. The QorIQ P2 family sits below P3/P4 high-end devices and above the P1 single-core family in NXP's communications processor hierarchy, occupying the quad-core low/mid-range niche for routers, switches, and industrial control. The P2041 within this family adds hardware acceleration and virtualization support absent in single-core alternatives. Key features include four e500mc cores running at 1.5 GHz, integrated 256 KB per-core L2 cache, hardware pattern-matching and cryptography engines, three PCIe Gen2 controllers, two 10-Gigabit Ethernet MACs plus eight 1-Gigabit Ethernet MACs, two DDR3 memory controllers (32/64-bit), and a 32-bit legacy plus 64-bit AXE/PCIe fabric. The design w/o SEC suffix indicates the SEC (Security Engine) block is not included in this SKU, reducing silicon cost for designs that rely on external cryptography. Typical applications include multi-service routers, LTE/Wi-Fi gateway controllers, secure network appliances, industrial control and automation hosts, fanless branch-office routers, and line cards in modular communications systems. The 1.5 GHz clock plus four cores provides headroom for control-plane workloads and modest packet processing. When designing with this device, allocate sufficient PCB area for the 780-ball FC-PBGA and follow NXP's thermal management guidelines - the 0.4mm ball pitch requires precise reflow profiling. Use NXP's CodeWarrior or Linux BSP toolchains and validate against the QorIQ P2041 hardware reference manual and the PBGA780 mechanical drawing. This page synthesizes distributor pricing, BGA replacement options, and practical design notes not found in the manufacturer datasheet.

RFQ Liên hệ
P2041NSN7MMC - QorIQ P2041 Quad-Core 1.2GHz SoC MPU | NXP
P2041NSN7MMC

P2041NSN7MMC - QorIQ P2041 Quad-Core 1.2GHz SoC MPU | NXP

The NXP QorIQ P2041NSN7MMC is a quad-core 32-bit PowerPC e500mc microprocessor SoC operating at up to 1.2 GHz, packaged in a 780-pin FCPBGA (23x23 mm) and targeted at networking, industrial control, and embedded compute workloads. A microprocessor (MPU) is an integrated CPU that fetches, decodes, and executes instructions from memory while interfacing with peripherals, memory controllers, and high-speed serial I/O. The QorIQ family sits within NXP's communications-processor taxonomy: SoC -> microprocessor (MPU) -> networking processor -> QorIQ P-series. The P2041NSN7MMC is the higher-speed sibling of the P2040 and shares its 23x23 mm pinout, enabling a single PCB layout to support either SKU based on performance and thermal budget. Key features include four e500mc cores at 1.2 GHz, a 32-bit architecture with 64-bit extension, integrated DDR3/DDR3L memory controllers, hardware acceleration for packet parsing, and rich high-speed I/O including PCIe, SATA, Serial RapidIO (SRIO), and 1/10 Gigabit Ethernet MACs. The device integrates five Gigabit Ethernet controllers and supports platform security through its Trust Architecture, making it suitable for managed switches, routers, base stations, and secure industrial gateways. Architecture-wise, the P2041 uses a coherent shared-memory fabric across the four cores with per-core L1 and a shared L2 cache hierarchy. Compared with the prior-generation P3 family, the P2041 adds virtualization primitives (hypervisor support) and double-precision hardware assist, and the cores run in fully symmetric multiprocessing (SMP) or asymmetric partitioning modes. Typical applications include enterprise routers, top-of-rack switches, LTE small-cell base stations, network-attached storage controllers, and industrial automation controllers. In all of these, the part's combination of multi-core throughput and integrated 10 GbE MACs reduces bill-of-materials and PCB area versus a discrete CPU plus Ethernet PHY/bridge design. When designing with the P2041NSN7MMC, allocate the largest DDR3/DDR3L trace-length matching budget to data lanes and follow NXP's hardware specification for power-rail sequencing (Vcore before Vddr). The 23x23 mm FCPBGA package requires multilayer PCB stack-up with controlled-impedance vias and a thermal solution capable of dissipating the device's typical 8-12 W workload envelope. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes derived from the NXP hardware specification, complementing the manufacturer datasheet with cross-reference and sourcing context.

RFQ Liên hệ
P2041NSN7NNC557 - QorIQ P2 4-Core Power SoC 1.3GHz 780-FCPBGA | NXP
P2041NSN7NNC557

P2041NSN7NNC557 - QorIQ P2 4-Core Power SoC 1.3GHz 780-FCPBGA | NXP

The NXP (formerly Freescale) P2041NSN7NNC557 is a QorIQ P2041 communications processor from NXP's 32-bit Power Architecture SoC family, integrating four e500mc PowerPC cores running at up to 1.3 GHz in a 780-ball FCPBGA (23x23 mm) package. According to the NXP product page for P2041NSN7NNC, the device targets networking and wired communications workloads with hardware-accelerated interfaces for DDR3/DDR3L memory, PCIe, SATA, Serial RapidIO (SRIO), and 1 GbE / 10 GbE Ethernet. The "557" suffix and "R2.0" mask revision indicate this is a tier-2 (1.3 GHz) industrial-grade variant suitable for 0 to 105 C operation. A QorIQ communications processor is a multi-core system-on-chip designed by NXP for routers, switches, base stations, and network-attached storage equipment, sitting in the hierarchy: Power Architecture SoC -> communications processor -> multicore networking MPU -> embedded processor. The P2041 belongs to the P2 family that succeeded the earlier PowerQUICC III devices, replacing discrete ASIC/FPGA datapath logic with integrated SerDes and a coherent CoreNet fabric. Key differentiating features include four e500mc cores with double-precision hardware floating-point, a high-bandwidth CoreNet coherency fabric, three PCI Express Gen2 controllers, two SATA 2.0 ports, dual 10 Gigabit Ethernet and multiple Gigabit Ethernet controllers, a 64-bit DDR3/DDR3L controller with ECC, and integrated security including SEC 4.0 crypto acceleration. Hardware virtualization and partitioning are supported for running multiple OS instances on a single device. The architecture relies on the e500mc core with out-of-order execution, dual-issue pipelines, and per-core 32 KB I-cache / 32 KB D-cache plus a 256 KB private L2, while a shared 2 MB platform cache reduces external memory traffic. SerDes lanes are multiplexed across PCIe, SATA, SRIO and XAUI / SGMII / QSGMII Ethernet PHYs, giving the BOM flexibility typical of P-series designs. Typical applications include enterprise routers, multi-service edge gateways, industrial control planes, network-attached storage controllers, LTE small-cell base stations, and secure VPN / firewall appliances. The wide I/O voltage support (1.0 / 1.35 / 1.5 / 1.8 / 2.5 / 3.3 V) simplifies interfacing to legacy logic on carrier-grade line cards. When designing with this part, plan for a multilayer PCB with controlled-impedance SerDes routing, a dedicated clock tree for the platform, and DDR3 fly-by topology with write-leveling calibration. Thermal design is critical: at full load across four cores the device must be mounted on a board with thermal vias under the lid and, in many chassis, attached to a heatsink to stay below the 105 C junction rating. This page synthesizes verified distributor pricing for the P2041NSN7NNC557, parametric alternatives sourced from web data, and practical design considerations not consolidated on the manufacturer product page.

RFQ Liên hệ
P2041NSN7PNAC - QorIQ P2 4-Core 1.5GHz Power Arch SoC | NXP
P2041NSN7PNAC

P2041NSN7PNAC - QorIQ P2 4-Core 1.5GHz Power Arch SoC | NXP

The NXP P2041NSN7PNAC is a quad-core Power Architecture system-on-chip from the QorIQ P2 family, integrating four e500mc cores running at up to 1.5 GHz in a 780-pin FCPBGA (23x23 mm) package. Built on a 45 nm process and rated for the 0 to 105°C industrial operating range, it combines high-end networking features originally pioneered on the P4 platform with the cost and power profile required by mid-range quad-core networking applications. A QorIQ communications processor is a multicore Power Architecture SoC that integrates CPU cores, memory controllers, high-speed serial interfaces, and acceleration logic on a single die for use in routers, switches, base stations, and other packet-processing equipment. Within the broader taxonomy, it sits at: communications processor -> embedded processor -> microprocessor unit (MPU) -> integrated circuit -> semiconductor. Key features include four 32-bit e500mc cores with dual-issue superscalar pipelines, a 64-bit DDR3/DDR3L memory controller with ECC support, three PCIe Gen 2 controllers, two SATA 2.0 interfaces, three Serial RapidIO (SRIO) ports, five 1 GbE controllers, an XAUI 10 Gigabit Ethernet interface, hardware cryptography acceleration, and a Data Path Acceleration Architecture (DPAA) for intelligent frame dispatch. Trust Architecture 1.0 secure boot is also integrated. Architecturally, the device pairs general-purpose cores with dedicated accelerators and a coherent CoreNet fabric, allowing packet parsing, classification, encryption, and queue management to be offloaded from the cores. The combination of integrated 10 GbE MACs and SerDes lanes reduces external PHY count and BOM in line-card and control-plane designs. Typical applications include enterprise routers and switches, wireless base stations, network-attached storage controllers, industrial control planes, and single-board computing platforms. It is also deployed in defense and aerospace packet-processing subsystems where the extended temperature range is required. When designing with this part, pay close attention to PCB layout for the 780-ball BGA, ensure proper power-rail sequencing, and validate that DDR3 memory topology meets the signal-integrity budget for the chosen operating frequency. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ
P2041NXE1MMB - QorIQ P2 4-Core 1.2GHz PowerPC MCU | NXP
P2041NXE1MMB

P2041NXE1MMB - QorIQ P2 4-Core 1.2GHz PowerPC MCU | NXP

The NXP (formerly Freescale) P2041NXE1MMB is a quad-core PowerPC e500mc microprocessor in the QorIQ P2 communications processor family, integrating four 32-bit cores running at 1.2 GHz inside a 780-ball FCBGA measuring 23 x 23 mm. The P2041 part is intended for mid-range wired and wireless networking, line-card control-plane, and industrial telemetry workloads where deterministic performance and Power Architecture software compatibility are required. Per the QorIQ P2040/P2041 datasheet family, the device supports 32-bit Power Architecture with hypervisor and virtualization assist, hardware-accelerated pattern matching, and encryption acceleration for IPsec, SSL/TLS, and 802.1AE MACsec data paths. The MMB suffix indicates the industrial -40C to +105C operating temperature grade with 1200 MHz core frequency. The NXE designator marks the security-enabled (encrypted) silicon revision r1.1. Background: A communications processor is a system-on-chip (SoC) class of microprocessor that combines general-purpose CPU cores, high-speed serial interfaces, packet-processing engines, security accelerators, and memory controllers on a single die. QorIQ P-series parts sit within the broader Power Architecture ecosystem and are software-compatible across P1, P3, P4, and P5 families, enabling code reuse. Multicore communications processors are widely used in routers, switches, base stations, industrial gateways, and military radios where deterministic throughput and packet-latency budgets matter more than raw single-thread speed. Key features include four e500mc cores at 1.2 GHz with shared L2 cache, three 10/100/1000 Mbps enhanced triple-speed Ethernet controllers, five high-speed serial RapidIO or SerDes lanes, DDR3/DDR3L SDRAM controller with ECC support, integrated security engine (SEC 4.0) for IPsec and SSL, PCI Express Gen 2.0 controllers, and a 32-bit local bus. The 780-FCBGA package exposes extensive SerDes, Ethernet, and memory interfaces while supporting industrial-grade thermal operation from -40C to +105C. Typical applications include enterprise routers and switches, multi-service access nodes, industrial control-plane processors, LTE small-cell base stations, secure VPN gateways, and military/aerospace communications. Designers choose the P2041 when four cores deliver sufficient throughput but the larger P4040/P4080 power envelope is overkill. The encrypted NXE silicon variant is required for secure boot and tamper-resistant key storage in defense and critical infrastructure deployments. When designing with this device, allocate adequate PCB area for the 780-ball FCBGA fan-out, follow NXP AN3949 thermal recommendations for the FCBGA heat-spreader attachment, and validate DDR3 signal integrity with IBIS models before tape-out. Confirm long-term supply through NXP's product longevity program, since QorIQ P2 parts have transitioned through several end-of-life announcements. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet alone, including verified stock at distributors such as Rochester Electronics and indicative unit pricing as of 2026-10-16.

RFQ Liên hệ
P2041NXE1PNB - QorIQ P2 4-Core 1.5GHz PowerPC MPU | NXP
P2041NXE1PNB

P2041NXE1PNB - QorIQ P2 4-Core 1.5GHz PowerPC MPU | NXP

The NXP P2041NXE1PNB is a quad-core PowerPC e500mc microprocessor from the QorIQ P2 family, operating at 1.5 GHz and housed in a 780-ball FC-PBGA (23x23 mm) package. It supports 32-bit processing with hardware-accelerated cryptography and SEC (Security Engine) acceleration, offering high-end architectural features for networking, industrial, and aerospace applications. A microprocessor (MPU) is a single-chip CPU that integrates arithmetic logic, control unit, cache, and I/O interfaces onto one silicon die, forming the core compute engine of an embedded system. The QorIQ P2 platform sits within the broader NXP communications processor hierarchy (P1 < P2 < P3/P4/P5), combining low power consumption with high per-core performance for mid-range quad-core workloads. Key features include four e500mc cores at 1.5 GHz, integrated SEC for cryptographic offload, DDR3 memory controller with ECC support, multiple Ethernet interfaces, and extended temperature grade operation. The device targets the low-end to mid-range of the quad-core communications space and is software-compatible with all P1, P3, P4, and P5 family devices, enabling scalable firmware reuse across product lines. The P2041 architecture combines out-of-order execution with SMP support across cores, hardware virtualization, and advanced power management. The SEC block offloads AES, 3DES, RSA, ECC, and other cryptographic algorithms, offloading the cores for packet processing and control-plane operations. Typical applications include enterprise routers, network switches, industrial control, military/aerospace computing, and secure communications platforms. The extended temperature grade makes P2041NXE1PNB suitable for harsh-environment deployments where commercial-grade parts cannot operate. When designing with this MPU, ensure proper thermal management via the exposed die and adequate PCB layer stack-up for the 780-ball BGA fan-out. Validate supply rail sequencing and decoupling per NXP hardware design guidelines. This page synthesizes drop-in alternates within the P2041/P2040 family, current distributor pricing, and applied engineering notes not found in the manufacturer datasheet.

RFQ Liên hệ
P2041NXE7MMC - QorIQ 4-Core 1.2GHz SoC, 780-FCBGA | NXP Semiconductors
P2041NXE7MMC

P2041NXE7MMC - QorIQ 4-Core 1.2GHz SoC, 780-FCBGA | NXP Semiconductors

The NXP Semiconductors P2041NXE7MMC is a QorIQ P2-series quad-core communications processor built on the 32-bit Power Architecture e500mc core, integrating four cores running at up to 1.2 GHz in a 780-pin FCBGA (23x23 mm) package with industrial temperature grade -40C to +105C. The device integrates DDR3/DDR3L memory controllers with ECC, multiple high-speed serial interfaces including PCIe, SATA, and Serial RapidIO (SRIO), 1 GbE and 10 GbE MACs, and a security engine (SEC). It is positioned as a high-integration System-on-Chip for mid-range networking, wireless baseband, and industrial control applications. A QorIQ communications processor is a highly-integrated SoC designed for embedded networking and data-plane workloads, combining general-purpose CPU cores with hardware accelerators for packet processing, cryptography, and high-speed I/O. Within the broader taxonomy, the P2041 belongs to the PowerPC/Power Architecture family of microprocessors, falls within the communications processor segment, and bridges the gap between low-end single-core devices and high-end multicore CPUs such as the P4 family. It is software-compatible with P1, P3, P4, and P5 families, enabling design reuse across the QorIQ portfolio. Key features include four Power Architecture e500mc cores at 1.2 GHz, dual DDR3/DDR3L controllers with 64-bit data width and ECC, three PCI Express Gen2 controllers, two SATA 2.0 ports, four Serial RapidIO (SRIO) ports, four 1 GbE controllers, one 10 Gigabit Ethernet (XAUI) MAC, an integrated security engine supporting DES, 3DES, AES, SHA, RSA, and ECC, and a 32-bit local bus. The device operates from a typical 1.0V core supply with separate voltage rails for the DDR I/O and SerDes blocks. The SoC is implemented in 45 nm CMOS process technology and supports hypervisor-aware virtualization, advanced power management with dynamic frequency scaling, and extensive debugging via JTAG and run-control. The high level of integration reduces board complexity by eliminating the need for discrete packet processors, crypto accelerators, and memory controllers in many designs. Typical applications include multiservice routers and gateways, LTE and WiMAX base stations, network-attached storage (NAS), industrial Ethernet switches, factory automation controllers, and defense/aerospace networking. The integrated security engine makes it especially well suited to IPsec VPN gateways and secure CPE devices. This part is in the EOL phase per the NXP product page; design teams should evaluate the listed alternatives for new designs. When designing with the P2041NXE7MMC, pay close attention to power sequencing, DDR3L signal integrity (the SoC requires matched-length routing and 50 ohm controlled impedance), and SerDes reference clock quality. Adequate thermal relief is required because the FCBGA package can dissipate more than 10W under sustained multi-core load. This page consolidates distributor pricing, verified drop-in QorIQ alternatives within the same 780-FCBGA footprint, and design considerations for industrial-temperature networking designs.

RFQ Liên hệ
P2041NXN1MMB - QorIQ P2041 Quad-Core 1.2GHz PowerPC MPU | NXP
P2041NXN1MMB

P2041NXN1MMB - QorIQ P2041 Quad-Core 1.2GHz PowerPC MPU | NXP

The NXP QorIQ P2041NXN1MMB is a quad-core 32-bit PowerPC e500mp microprocessor running at 1.2 GHz, housed in a 780-pin FCBGA (23x23 mm) package with industrial -40C to +105C temperature rating. It belongs to NXP's QorIQ P2 communications processor family and is software-compatible with the P1, P3, P4, and P5 families. What is a QorIQ communications processor? A QorIQ communications processor is a multicore system-on-chip designed for networking, telecom, and embedded data-plane workloads. It sits within the broader embedded microprocessor taxonomy (MPU -> SoC -> communications processor -> multicore SoC). QorIQ platforms integrate CPU cores, high-speed I/O (SerDes, Ethernet MACs, PCIe, SATA), security engines, and memory controllers on a single die to deliver deterministic throughput for packet processing, industrial control, and secure routing. The P2 series (P2040/P2041) brings high-end datapath acceleration originally pioneered in P4 silicon into a low-to-mid power envelope, enabling cost-sensitive fanless designs. Key features include four PowerPC e500mp cores with hardware hypervisor support, integrated 45 nm process technology, dual memory controllers for DDR3/DDR3L with ECC, three PCIe Gen2 controllers, ten Gigabit Ethernet ports, and an SoC security engine (SEC 4.0). The device operates across -40C to +105C industrial temperature range, making it suitable for harsh environments. On-chip accelerators include QUICC Engine technology, DPAA-style packet handling primitives, and pattern-matching for IPSec and deep packet inspection. Typical applications span enterprise routers, industrial Ethernet switches, LTE base station baseband, secure network appliances, factory automation controllers, and single-board computers for aerospace/defense. The combination of four cores at 1.2 GHz, hardware virtualization, and security offload makes the P2041 a strong fit for multi-service access nodes and embedded intelligent edge platforms. When designing with the P2041, allocate adequate PCB area for the 780-ball FCBGA and use at least 6 layers with matched-impedance routing for DDR3 traces. Thermal design must dissipate up to approximately 12 W under full quad-core load - a heatsink plus thermal interface material and adequate airflow are typically required. Power sequencing requires a NXP-compatible VRM solution that supports the core and platform voltage rails within the SOF specification. This page synthesizes distributor availability, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ
P2041NXN1NNB - QorIQ P2041 1.3GHz Quad-Core PowerPC MPU | NXP
P2041NXN1NNB

P2041NXN1NNB - QorIQ P2041 1.3GHz Quad-Core PowerPC MPU | NXP

The NXP P2041NXN1NNB is a QorIQ P2041 quad-core PowerPC e500mc microprocessor running at 1.3 GHz, housed in a 780-pin FCPBGA (23x23 mm) and aimed at wired/wireless infrastructure, industrial control, and defense applications where deterministic quad-core performance and high I/O bandwidth are required. The part suffix decodes to P2041 (qualification ext temp), without SEC (security engine), core frequency 1333 MHz, silicon revision 1.1. A QorIQ communications processor is a heterogeneous multi-core SoC derived from the Power Architecture roadmap. Within NXP's portfolio it sits in the P-series hierarchy (P1 -> P2 -> P3 -> P4 -> P5), providing low-end to mid-range quad-core performance that is software-compatible with the rest of the family. The P2041NXN1NNB specifically integrates four e500mc cores, hardware MMU and virtualization, a 32-bit datapath, and a coherent fabric that maintains cache coherency across all four cores - enabling symmetric multiprocessor operating systems such as VxWorks, INTEGRITY, and Linux SMP to scale linearly across the cores. Key features include four PowerPC e500mc cores up to 1.5 GHz (this SKU 1.3 GHz), integrated 256 KB L2 per core pair, 1 MB shared platform cache, three 10 Gbit/s XAUI/HIGIG interfaces (no SEC crypto accelerator on this SKU), DDR3 memory controller with ECC, four GbE SGMII ports, two PCI Express Gen2 controllers, USB 2.0, SD/MMC, I2C, SPI, UART, and 780-pin FCBGA packaging. The part supports extended-temperature operation (-40C to +105C ambient) and targets industrial extended-temp qualifications. The P2041NXN1NNB architecture uses a CoreNet coherency fabric for low-latency core-to-I/O traffic and a hierarchical memory subsystem that delivers deterministic interrupt latency. Hardware virtualization and DPAA (Data Path Acceleration) primitives make the device well-suited to multi-instance networking workloads, vCPE, and small-cell LTE base stations. Compared with the P2040 (no security engine, lower freq), P2041 typically adds a SEC 4.0 engine and faster core speeds - but the NX (no security) variant explicitly excludes SEC to reduce cost in non-secure applications. Typical applications include industrial Ethernet switches, line-card control-plane processors, factory-floor routers, defense/aerospace ruggedized compute modules, and small-cell LTE base stations. The part's extended-temp qualification and quad-core SMP support also suit medical imaging pre-processing and video surveillance analytics where deterministic multi-core compute is required. When designing with this device, ensure the PCB stack-up supports the 780-ball FCBGA at 1 mm pitch with microvia technology. Provide a clean 1.0 V core supply with monotonic sequencing and use a DDR3 controller reference design for signal integrity. For thermal management, the 23x23 mm FCBGA must be attached to a thermal interface material and heat spreader - junction-to-ambient theta_JA is typically below 15 C/W with proper layout, but derate in enclosed enclosures. This page synthesizes distributor pricing, current lifecycle status, drop-in same-family alternatives, and practical design notes not found in a single manufacturer datasheet, providing an at-a-glance comparison guide for engineering sourcing decisions.

RFQ Liên hệ
P2041NXN1PNB557 - QorIQ P2 4-Core 1.5GHz PowerPC MPU | NXP
P2041NXN1PNB557

P2041NXN1PNB557 - QorIQ P2 4-Core 1.5GHz PowerPC MPU | NXP

The NXP P2041NXN1PNB557 is a QorIQ P2 series quad-core PowerPC e500mc microprocessor running at 1.5 GHz, housed in a 780-ball FC-PBGA (FCPBGA) package measuring 23x23 mm. It is a 32-bit MPU built on CMOS process technology targeting networking, industrial control, and wired/wireless infrastructure workloads where deterministic multi-core processing is required. A QorIQ communications processor is a multi-core CPU subsystem designed by NXP for embedded networking equipment. QorIQ parts sit in the hierarchy: microprocessor -> communications processor -> networking SoC -> embedded processor. The P2 sub-family is NXP's mid-tier line, positioned between the entry-level P1 (single/dual core) and high-end P3/P4/P5 (8-core and beyond) families. P2041 specifically targets multi-gigabit routers, secure gateways, and military/aerospace Linux-based appliances. Key features of the P2041 include four e500mc cores with double-precision FPU units, 32 KB L1 instruction cache and 32 KB L1 data cache per core, a shared 1 MB L2 cache, integrated 64-bit DDR3 memory controller with ECC, three PCI Express Gen2 controllers, two 10-Gigabit Ethernet MACs plus eight 1-Gigabit Ethernet MACs, two USB 2.0 ports, and a hardware security engine supporting AES, 3DES, and Kasumi. The 780-FCPBGA package supports the full high-speed SerDes lane count required for line-card designs. Architecturally, the P2041 uses a coherent SMP fabric that lets all four cores share memory coherently through a CoreNet coherency fabric, enabling symmetric multiprocessing (SMP) for VxWorks and Linux SMP kernels. The integrated SEC (Security Engine) offloads encryption throughput, freeing the e500mc cores for packet processing pipelines such as DPI, IPSec, and GTP-U decoding. Typical applications include enterprise routers, multi-service switches, network attached storage (NAS) controllers, industrial PLC gateways, and aerospace mission computers. This part number specifically (NXN1PNB) denotes the 1.5 GHz speed grade, the 780-FCPBGA package, and the industrial temperature range. Designers use it when deterministic throughput across multiple control planes is required without the cost of a high-end P4040/P4080 part. When designing with the P2041NXN1PNB557, pay attention to PCB layout rules for the FC-PBGA substrate - signal routing under the package demands matched-impedance stripline with 100 Ohm differential for SerDes lanes, and a 12-layer stack-up minimum is recommended for full multi-gigabit SerDes operation. Proper thermal management via center-ball power/ground shorting and copper coin heat sinks is required at 1.5 GHz under full four-core load. [DATA_NEEDED: full electrical/thermal specification values] [DATA_NEEDED: precise price tiers from authorized distributors] This page synthesizes distributor stock references, same-family NXP drop-in variants, and practical design notes for the QorIQ P2 platform that are not aggregated in any single manufacturer document.

RFQ Liên hệ
P2041NXN7MMC - QorIQ P2041 Quad-Core 1.2GHz SoC | NXP
P2041NXN7MMC

P2041NXN7MMC - QorIQ P2041 Quad-Core 1.2GHz SoC | NXP

The NXP P2041NXN7MMC is a QorIQ P2 series quad-core Power Architecture system-on-chip (SoC) integrating four PowerPC e500mc cores running at 1.2GHz, with DDR3/DDR3L memory controllers, PCIe, SATA, Serial RapidIO (SRIO), and 1G/10GbE interfaces in a 780-pin FCPBGA (23x23 mm) package. It targets industrial and extended-temperature networking applications from -40C to +105C and is manufactured on a 45nm process. A QorIQ communications processor is a multi-core Power Architecture SoC that integrates CPU cores, memory controllers, high-speed serial interfaces, packet-processing acceleration, and security engines into a single device. Within the broader taxonomy, QorIQ belongs to communications processors -> microprocessors -> integrated circuits -> semiconductors. The P2041 brings high-end features pioneered in NXP's P4 platform into the mid-range quad-core segment while remaining software-compatible with P1, P3, P4, and P5 families, enabling scalable software reuse across NXP's networking portfolio. Key features include four 32-bit PowerPC e500mc cores with hardware hypervisor and virtualization support, a high-bandwidth DDR3/DDR3L memory controller with ECC, integrated 10 Gigabit Ethernet MACs, multiple 1 Gigabit Ethernet interfaces, hardware acceleration for packet classification and encryption, and robust thermal management for fanless operation. Compared to the pin-compatible P2040, the P2041 adds additional cryptographic acceleration engines and higher core frequency options. The architecture combines four out-of-order e500mc cores with NXP's CoreNet coherency fabric, delivering deterministic performance for control-plane and data-plane workloads. The 45nm process balances performance-per-watt, allowing fanless deployment in thermally constrained networking and industrial chassis where the 780-FCPBGA package manages thermal dissipation via a heat spreader. Typical applications include industrial Ethernet switches, network routers and gateways, multi-service access platforms, LTE base station controllers, factory automation controllers, and defense/aerospace secure networking. The P2041NXN7MMC is suited wherever multiple secure packet-processing threads must run in parallel without sacrificing deterministic latency. When designing with this device, allocate the largest copper area possible for the FCPBGA heat spreader to keep junction temperature within the -40C to +105C range at full load. Use NXP's CodeWarrior or Linux SDK toolchains and validate signal-integrity on 10GbE SerDes traces with the device's reference design guidelines. This page synthesizes distributor pricing, same-family NXP drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet, including lifecycle context relevant for long-term industrial deployments.

RFQ Liên hệ
P3041NSE1MMB - QorIQ P3041 Quad-Core 1.2GHz MPU | NXP
P3041NSE1MMB

P3041NSE1MMB - QorIQ P3041 Quad-Core 1.2GHz MPU | NXP

The NXP P3041NSE1MMB is a QorIQ P3041 quad-core PowerPC e500mc microprocessor IC operating at 1.2GHz, housed in a 1295-ball FCBGA package measuring 37.5mm x 37.5mm. This encrypted, 0 to 105 degrees Celsius industrial-temperature variant (r1.1) leverages architectural features pioneered in the P4 platform while delivering a more power- and cost-efficient solution for networking and embedded applications. A microprocessor (MPU) is a single-chip CPU that integrates arithmetic logic, control unit, registers, cache, and memory management into one package. The QorIQ P3 family sits at the tier of communications processors within NXP's broader Power Architecture portfolio, designed for high-performance packet processing and control-plane workloads in routers, switches, and security appliances. The P3041 combines four enhanced e500mc cores with hardware-accelerated pattern matching, crypto engines, and a high-speed interconnect fabric. Key features of the P3041NSE1MMB include four e500mc cores running at 1.2GHz with 32-bit architecture, hardware-accelerated encryption for IPsec, SSL, and SRTP, integrated DDR3/DDR3L memory controller with ECC, multiple SerDes lanes supporting SGMII, XAUI, and PCIe, and an encrypted secure-boot flow for IP protection. The 1295-ball FCBGA package exposes all SerDes, DDR, Ethernet, PCIe, USB, SPI, I2C, UART, and GPIO interfaces. The architecture combines dual-issue superscalar out-of-order execution cores with a hierarchical CoreNet fabric that delivers coherent SMP and supports hardware virtualization. Power management is achieved through multiple low-power states including nap, sleep, and deep sleep, with dynamic frequency scaling per core domain. Thermal monitoring is built into the die with on-chip sensors and programmable thermal alerts. Typical applications for the P3041NSE1MMB include enterprise routers, edge switches, wireless base stations, network security appliances, industrial control systems, and factory automation controllers. The combination of quad-core performance, hardware crypto acceleration, and packet processing engines makes it well suited for control-plane plus data-plane convergence workloads. The 0 to 105 degrees Celsius industrial temperature range also supports deployment in outdoor or ruggedized enclosures. When designing with this device, allocate adequate PCB real estate for the 37.5mm x 37.5mm FCBGA footprint, implement matched-length routing for DDR3 channels, and provide sufficient decoupling across the multiple voltage rails. The encrypted boot flow requires careful key provisioning and a secure firmware update path. Designers should reference the QorIQ P3041 Reference Manual for complete SerDes lane configuration and SerDes reference clock topology. This page synthesizes distributor pricing, encrypted vs non-encrypted sibling variants, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ
P3041NSE1NNB - QorIQ Quad-Core PowerPC 1.333GHz 1295-FCBGA | NXP
P3041NSE1NNB

P3041NSE1NNB - QorIQ Quad-Core PowerPC 1.333GHz 1295-FCBGA | NXP

The NXP P3041NSE1NNB is a QorIQ P3 series quad-core microprocessor built on PowerPC e500mc architecture, operating at up to 1.333 GHz core frequency, and housed in a 1295-ball FCBGA (Flip-Chip Ball Grid Array) package measuring 37.5 mm x 37.5 mm with 1 mm ball pitch. It integrates four 32-bit Power Architecture cores, a hardware security engine (SEC 4.2), DDR3/DDR3L memory controllers, and high-speed serial interfaces targeted at networking and industrial embedded applications. What is a QorIQ communications processor? QorIQ is NXP's family of Power Architecture-based multicore processors designed for networking, industrial, and aerospace applications where deterministic performance, packet processing, and integrated I/O matter more than raw clock speed. The P3041 belongs to the P3 sub-family, an optimized quad-core tier that inherits architectural features from the higher-tier P4 platform while reducing power and cost - effectively delivering P4-class integration at lower thermal and bill-of-materials budgets. Key features of the P3041NSE1NNB include four e500mc cores with 32-bit datapath, integrated SEC 4.2 security accelerator for encryption and IPsec offload, dual DDR3/DDR3L memory controllers with ECC support, multiple 10 Gigabit and Gigabit Ethernet MACs, PCIe Gen2 controllers, and enhanced peripheral interfaces including USB, SATA, and SDHC. The device supports hardware virtualization and various QoS features for low-latency packet processing. Technically, the P3041 combines a coherent crossbar fabric interconnecting cores, caches, and platform blocks with a high-bandwidth memory subsystem and SerDes-based I/O. The 1.333 GHz frequency, combined with per-core 32 KB I-cache and 32 KB D-cache plus a shared platform cache, delivers sustained performance for routing, security, and control-plane workloads. The 0-105C extended temperature range supports industrial and rugged environments. Typical applications include enterprise and edge routers, network switches, industrial control and automation gateways, secure communication platforms, and aerospace/defense packet processing. The integrated SEC engine and DDR3L support make it particularly well-suited for IPsec/IPv6 firewalls, VPN concentrators, and LTE infrastructure nodes. Design considerations include careful FCBGA PCB layout with matched-impedance SerDes routing, a robust thermal solution at higher ambient temperatures, and BGA socket or board-stacked assembly for prototyping. SEC features must be enabled in firmware; encrypted part numbers follow NXP's secure provisioning model. This page synthesizes distributor availability, drop-in same-family NXP part variants, and practical PCB/thermal design guidance not found in the manufacturer datasheet alone.

RFQ Liên hệ
P3041NSE1PNB - 1.5GHz Quad-Core QorIQ P3 MPU | NXP | Networking
P3041NSE1PNB

P3041NSE1PNB - 1.5GHz Quad-Core QorIQ P3 MPU | NXP | Networking

The NXP P3041NSE1PNB is a quad-core PowerPC e500mc microprocessor from the QorIQ P3 communications-processor family, operating at up to 1.5 GHz in a 1295-ball FCPBGA (37.5 x 37.5 mm) package. The part integrates four high-performance 32-bit e500mc cores, a three-level cache hierarchy (32 KB I-cache + 32 KB D-cache per core, 128 KB backside L2 per core, and a shared 1 MB CoreNet platform cache), and the standard QorIQ datapath acceleration blocks including SEC 5.0 for cryptographic offload. It is the standard-temperature, security-engine-enabled, 1500 MHz speed-grade variant of the P3041 silicon. A communications processor (often abbreviated as a comms-MPU or network-MPU) is a high-integration System-on-Chip (SoC) class microprocessor that combines general-purpose CPU cores with hardware acceleration engines for packet processing, security, and Quality-of-Service (QoS) queuing. The QorIQ family sits within NXP's broader Power Architecture (PowerPC) communications-processor hierarchy: SoC -> microprocessor -> communications processor -> QorIQ P-series -> QorIQ P3 tier. P3041 parts are typically deployed in mid-range networking gear where a balance of control-plane compute and data-plane throughput is required. Key differentiating features of the P3041NSE1PNB include its four e500mc cores with hardware hypervisor and virtualization support, integrated SEC (Security Engine) 5.0 for IPSec, SSL/TLS, and 3GPP algorithms, two 10 Gbit/s plus five 1 Gbit/s Enhanced Three-Speed Ethernet (ETSEC) controllers, four PCIe Gen 2 controllers, two SATA 2.0 interfaces, two USB 2.0 interfaces (one host, one OTG), DDR3/DDR3L memory controller with ECC up to 32-bit wide, and integrated Trust Architecture security. It is the standard-temperature ("std temp") bin rated for 0C to +105C Tj (typical networking equipment operating range). The architecture leverages Power Architecture e500mc cores with a 256-bit wide CoreNet coherency fabric that ties cores, L2 caches, the shared platform cache, and the datapath accelerators together at full core frequency. The 1 MB CoreNet platform cache reduces external memory bandwidth pressure by absorbing frequently shared data-plane structures, while the dedicated SEC engine offloads bulk crypto from the cores, freeing them for control-plane and exception-path work. Typical applications for the P3041NSE1PNB include enterprise and small/medium-business routers, wired and wireless Unified Threat Management (UTM) appliances, network-attached storage (NAS) controllers, industrial firewalls, LTE/Wi-Fi small-cell base-station controllers, and print/image-formation controllers. Its quad-core + SEC combination targets control-plane-heavy, security-aware designs rather than pure line-rate forwarding roles, which are usually handled by P-series parts with more DPAA cores. The wide set of peripherals (PCIe, SATA, USB, multiple Ethernet MACs) lets a single P3041 implement most of the system logic for a compact 1U/half-width networking box. Design consideration: the 1295-FCPBGA at 37.5 x 37.5 mm requires a high-layer-count PCB (typically 10+ layers) with via-in-pad and laser-drilled microvia construction; follow NXP's hardware-design guide for trace impedance, DDR3 length matching, and thermal management. Boot sequencing requires a proper POR and reset tree as documented in the P3041 reference manual. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, and is intended to give embedded and networking engineers a fast, citation-grade reference for the P3041NSE1PNB.

RFQ Liên hệ
P3041NSN1MMB - QorIQ Quad-Core 1.2GHz PowerPC MPU | NXP
P3041NSN1MMB

P3041NSN1MMB - QorIQ Quad-Core 1.2GHz PowerPC MPU | NXP

The NXP P3041NSN1MMB is a QorIQ P3041 series quad-core microprocessor built on Power Architecture e500mc technology, operating at up to 1.2 GHz core frequency, and packaged in a 1295-ball FCBGA (37.5 mm x 37.5 mm). It integrates four 32-bit e500mc cores with a shared 256 KB L2 cache, on-chip DDR3/DDR3L memory controller, and high-bandwidth SerDes lanes for multi-gigabit interconnect. A microprocessor (MPU) is an integrated circuit that fetches, decodes, and executes instructions of a computer program; the QorIQ P3041 belongs to the multi-core communications microprocessor sub-family, sitting in the broader hierarchy of embedded processors -> microprocessors -> integrated circuits -> semiconductors. Within NXP's communications portfolio it complements the P4 platform family by offering similar architectural features in a lower-power, lower-cost envelope. Key features include four e500mc PowerPC cores up to 1.2 GHz, dual-core-class performance per watt, integrated 64-bit DDR3/DDR3L controller with ECC support, multiple SerDes lanes supporting PCIe, SATA, and SGMII, hardware-accelerated cryptography and pattern-matching accelerators, and operating temperature range of 0 C to 105 C. The 'NonENC' suffix indicates the variant without the SEC (security) engine enabled. The architecture pairs out-of-order execution capability with a high-bandwidth CoreNet coherency fabric, allowing coherent shared-memory multi-core processing. Integrated peripherals reduce board real-estate by absorbing functions that historically required companion ASICs, including Ethernet MACs, DMA controllers, and SD/MMC interfaces. Typical applications include multi-service routers, unified threat management (UTM) appliances, industrial control gateways, and networked storage platforms. The four-core configuration is well suited to control-plane plus data-plane workloads running concurrently on dedicated cores. When designing with the P3041NSN1MMB, allocate a minimum 6-layer PCB with controlled-impedance routing for DDR3 and SerDes, follow NXP hardware specifications for FCBGA substrate design, and validate thermal solution against the 105 C upper operating limit. This page synthesizes distributor inventory, datasheet extracts, and same-package drop-in alternatives across the QorIQ P3/P4 platform families, providing information beyond the standalone datasheet for hardware architects evaluating the part.

RFQ Liên hệ
P3041NSN1PNB - QorIQ P3041 1.5GHz Quad-Core PowerPC | NXP
P3041NSN1PNB

P3041NSN1PNB - QorIQ P3041 1.5GHz Quad-Core PowerPC | NXP

The NXP P3041NSN1PNB is a QorIQ P3 series quad-core microprocessor built on the PowerPC e500mc core architecture, operating at up to 1.5 GHz, and housed in a 1295-pin FCBGA (37.5 x 37.5 mm) package. It integrates four 32-bit e500mc cores, a high-bandwidth core complex, dual 10/100/1000 Mbps enhanced triple-speed Ethernet controllers, DDR3/DDR3L memory controllers with ECC, and five SerDes lanes supporting multiple protocol stacks including PCIe, SATA, and SRIO. The P3041 is part of NXP's QorIQ P-series optimized for high-performance, power-sensitive networking and industrial applications. A QorIQ microprocessor is a multicore communications processor that combines a coherent core complex, integrated I/O controllers, and high-speed serial interfaces on a single SoC. Within the broader taxonomy, the P3041 sits below high-end parts like the P4080 and P5020 in the QorIQ P-series, while inheriting the e500mc PowerPC instruction set developed by Freescale (now NXP). QorIQ parts target enterprise routers, switches, networked storage, industrial control, and defense/aerospace platforms where deterministic performance and rich I/O outweigh raw clock speed. Key features of the P3041 include four e500mc cores with hardware hypervisor support, dual DDR3/3L controllers supporting up to ECC-protected memory with 32-bit/64-bit datapaths, five SerDes lanes supporting combinations of PCIe 2.0, SATA 2.0, SRIO 2.1, and Aurora interfaces, packet processing acceleration with the QUICC Engine auxiliary block on adjacent family members, hardware cryptography and public-key engines, and integrated 10/100/1000 Ethernet MACs. The device is offered in standard temperature grades and supports complex multi-rail power sequencing typical of communications SoCs. Architecturally, the P3041 leverages the e500mc superscalar core with out-of-order execution, dual-issue pipelines, and a private L2 cache per core, coherently connected through a CoreNet coherency fabric. The on-chip datapath controllers offload packet inspection, queue management, and security operations, allowing CPU cycles to focus on control-plane software. Process technology and on-die voltage regulation enable multi-core operation within typical networking equipment power envelopes. Typical applications include enterprise networking routers and switches, network-attached storage (NAS) controllers, LTE/4G small-cell base station control elements, industrial control and SCADA platforms, defense data planes, and security appliances. The combination of multi-core processing, encryption acceleration, and flexible high-speed I/O makes the P3041 well-suited for systems where deterministic latency and QoS matter. Designers should plan for a multi-layer PCB with controlled-impedance routing for DDR3, SerDes, and Ethernet signals, plus a robust power delivery network with sequenced rails. Use NXP's reference design and CodeWarrior or Linux BSP support to accelerate firmware bring-up and the CoreNet coherency debugging cycle. This page synthesizes distributor pricing, real drop-in alternatives, and practical board-design notes not found in the manufacturer datasheet alone, helping procurement and design engineers evaluate the P3041NSN1PNB with current market context.

RFQ Liên hệ
P3041NSN7MMC - QorIQ P3041 4-Core 1.2GHz PowerPC SoC | NXP
P3041NSN7MMC

P3041NSN7MMC - QorIQ P3041 4-Core 1.2GHz PowerPC SoC | NXP

The NXP (formerly Freescale) P3041NSN7MMC is a 32-bit Power Architecture system-on-chip from the QorIQ P3 platform family, integrating four e500mc cores running at up to 1.2 GHz with hardware hypervisor virtualization, a three-level cache hierarchy, and the CoreNet on-chip switch fabric in a 1295-pin FCBGA package (37.5x37.5 mm). The P3041 is positioned as a low-power, mid-range mixed control-and-data-plane processor for industrial, networking, and military/aerospace applications, and is specified for the commercial 0C to 105C temperature range (Rev 2 silicon). A QorIQ communications processor is a multi-core Power Architecture SoC designed by NXP/Freescale for embedded networking workloads such as multi-gigabit routing, switching, and security acceleration. Within the broader taxonomy, the QorIQ P3 sits between the entry P1/P2 devices and the higher-end P4/P5 platforms, sharing architectural features with the P4080 and P4040 (quad/octal-core siblings) so that a single software base and PCB design can scale across performance points. Key features of the P3041 include four e500mc cores with dual-issue, out-of-order execution, hardware hypervisor partitions, Data Path Acceleration Architecture (DPAA) for protocol offload, an integrated 32-bit DDR3/DDR3L memory controller with ECC, multiple SerDes lanes supporting PCIe 2.0, SATA 2.0, SRIO, and 1 GbE/10 GbE interfaces, plus security accelerators for encryption and pattern matching. Power is delivered through an on-chip voltage regulator module fed from a 0.95 V to 1.1 V core supply with separate I/O rails. The device implements a coherent CoreNet switch fabric that ties cores, caches, DDR controller, and I/O blocks at full bandwidth, eliminating the northbridge bottleneck of earlier PowerQUICC devices. Three-level cache hierarchy (per-core L1, shared L2, and platform-level L3) reduces average memory latency, while the hardware hypervisor supports multiple OS partitions with strict isolation. Typical applications include industrial control and ruggedized networking routers, secure multi-gigabit gateways, military/aerospace communication systems, LTE/WiFi base-station control planes, and high-performance industrial embedded computing platforms. Within these systems the P3041 typically terminates control traffic, runs a real-time OS or Linux alongside management software, and accelerates packet inspection via DPAA. When designing with the P3041, careful attention must be paid to the FCBGA substrate routing and DDR3L signal integrity - the 1295-ball package demands a high-density, impedance-controlled PCB. Power-rail sequencing is mandatory because of the integrated VRM; consult the P3041 QorIQ Integrated Processor Hardware Specifications document for sequencing, thermal, and SerDes reference-clock constraints before committing to a layout. This page synthesizes distributor pricing, drop-in pin-compatible alternatives (P4040, P4080 family), and practical design considerations not consolidated on the manufacturer product page.

RFQ Liên hệ
P3041NXE1MMB - QorIQ P3 Quad-Core 1.2GHz MPU | NXP
P3041NXE1MMB

P3041NXE1MMB - QorIQ P3 Quad-Core 1.2GHz MPU | NXP

The NXP P3041NXE1MMB is a QorIQ P3 series PowerPC e500mc quad-core microprocessor running at 1.2 GHz, housed in a 1295-ball FCPBGA package measuring 37.5 x 37.5 mm. It is a 32-bit RISC MPU with hardware encryption (SEC 4.2), DDR3/DDR3L memory controller support, and an operating temperature range of -40C to +105C targeting industrial, networking, and secure communications equipment. What is a QorIQ communications processor? QorIQ is NXP's umbrella platform for high-performance multicore Power Architecture (PowerPC) processors used in networking, telecom, and embedded compute. It sits in the product hierarchy: microprocessor -> application processor -> communications processor -> embedded SoC. QorIQ P-series parts integrate CPU cores, memory controllers, security engines, and high-speed SerDes I/O for routers, switches, base stations, and security appliances. Unlike general-purpose MPU brands, QorIQ is engineered for deterministic packet processing and trusted execution. The P3041NXE1MMB key features include four e500mc cores at 1.2 GHz, integrated SEC 4.2 security/fabric accelerator with hardware encryption, dual DDR3/DDR3L memory controllers with ECC, multiple Ethernet interfaces (1/10 GbE capable), PCI Express and Serial RapidIO links, and a low-power standby mode. The 1295-FCPBGA package provides the high pin density required for the multi-channel parallel I/O and SerDes lanes. Technically the device combines four out-of-order e500mc cores sharing a coherent platform cache, with the SEC 4.2 block handling symmetric/asymmetric crypto, public-key acceleration, and run-control integrity. The platform's Data Path Acceleration Architecture (DPAA) is also implemented for parsing, classification, and queue management. Compared with the earlier P2/P4 platforms, the P3041 is positioned as a lower-power, security-emphasized quad-core variant. Typical applications include multi-function enterprise routers, secure VPN gateways, industrial firewalls, LTE/Wi-Fi small-cell base stations, and ruggedized industrial control platforms where AES/SHA hardware acceleration and the extended -40C to +105C temperature window are mandatory. Embedded computing SBCs (single-board computers) targeting defense and energy also use the part. Designers should note that the 37.5 x 37.5 mm FCPBGA requires multi-layer PCB stackup with microvia or via-in-pad construction for breakout routing; thermal management must handle the multi-watt core power. Use NXP's CodeWarrior or Linux SDK to develop firmware for the e500mc cores. This page consolidates current stock and pricing across DigiKey, Mouser, and authorized distributors, lists drop-in same-family variants for qualification/footprint reuse, and documents design notes beyond the public datasheet.

RFQ Liên hệ
P3041NXE1NNB - QorIQ P3 Quad-Core 1.333GHz MPU | NXP Semiconductors
P3041NXE1NNB

P3041NXE1NNB - QorIQ P3 Quad-Core 1.333GHz MPU | NXP Semiconductors

The NXP Semiconductors P3041NXE1NNB is a QorIQ P3 series PowerPC e500mc quad-core microprocessor operating at 1.333 GHz, housed in a 1295-ball FCBGA package (37.5 mm × 37.5 mm). It integrates four 32-bit Power Architecture cores, an SEC 4.2 crypto-acceleration engine, DDR3/DDR3L memory controllers, and multiple SerDes lanes for high-throughput networking and industrial connectivity. An embedded microprocessor (MPU) is a CPU-centric system-on-chip that combines processor cores, memory controllers, peripherals, and interconnect IP into a single device. Within the broader taxonomy, an MPU sits beneath microcontroller (MCU) and SoC concepts and above raw CPU cores, providing an integrated compute platform for routers, switches, and edge appliances where deterministic throughput and rich I/O are required. QorIQ communications processors from NXP are designed around the Power Architecture ISA and target data-plane and control-plane workloads in networking infrastructure. Key features of the P3041NXE1NNB include four e500mc cores with hardware hypervisor support, integrated SEC 4.2 for IPSec/SSL offload, four 10 GbE-class SerDes lanes, three PCIe Gen 2 controllers, and DDR3/DDR3L memory controllers with ECC. The device operates across the extended industrial temperature range (-40 °C to +105 °C for the NX qualification tier) and supports the QorIQ data-path acceleration architecture (DPAA) for queue and buffer management. The P3041 silicon leverages a 45 nm process and integrates a large amount of I/O while still fitting into a 37.5 mm × 37.5 mm FCBGA. By consolidating crypto, pattern matching, and high-speed serial interfaces, the device reduces external component count on line cards. It uses the same Data Path Acceleration Architecture introduced on higher-end P4 devices, but in a more power- and cost-efficient quad-core configuration suited to mid-range control and data-plane nodes. Typical applications include multi-service routers, Ethernet switches with deep packet inspection, industrial automation controllers, network-attached storage, and secure VPN gateways. The hardware crypto engine makes it well suited for secure communications gear requiring line-rate IPSec and TLS termination. When designing with this device, allocate adequate PCB area for the 1295-ball FCBGA and follow NXP's thermal and decoupling reference design from the P3041 hardware specifications. Designers should plan the DDR3 routing to meet impedance and length matching requirements because the memory controller directly affects sustained throughput. This page synthesizes distributor pricing, drop-in alternatives within the P3041 family, and practical design notes not consolidated in the manufacturer datasheet.

RFQ Liên hệ
P3041NXN1MMB - QorIQ P3 Quad-Core 1.2GHz MPU | NXP Semiconductors
P3041NXN1MMB

P3041NXN1MMB - QorIQ P3 Quad-Core 1.2GHz MPU | NXP Semiconductors

The NXP Semiconductors P3041NXN1MMB is a PowerPC e500mc quad-core microprocessor in the QorIQ P3 family, operating at up to 1.2 GHz core frequency and packaged in a 1295-ball FC-PBGA (FCBGA, 37.5x37.5 mm). It integrates four 32-bit e500mc cores with hardware-assisted multithreading, a high-performance memory subsystem, and the architectural building blocks pioneered on the P4080 P4 platform, while being optimized for lower power and cost. A microprocessor (MPU) is a single-chip CPU that fetches, decodes, and executes instructions directly from memory; in a QorIQ P3 device like the P3041NXN1MMB, the e500mc cores are paired with platform-wide coherency, DDR3/3L memory controllers, and high-speed SerDes lanes for networking, industrial, and aerospace/defense workloads. Within the broader semiconductor taxonomy, this part sits under microprocessors -> embedded processors -> integrated circuits -> semiconductors, and is engineered to replace older single-core PowerQUICC designs in next-generation networking line cards, base stations, and control-plane processors. Key features of the P3041NXN1MMB include four e500mc cores at up to 1.2 GHz, integrated DDR3/3L controllers with ECC support, multiple 10 GbE, GbE, and PCI Express controllers, hardware encryption and pattern-match acceleration, and the proprietary non-encrypted ("NonENC") build variant that omits cryptographic acceleration for export-control-sensitive regions. The 1295-FCBGA package provides a robust thermal envelope for industrial-grade silicon while exposing the full complement of high-speed I/O. Architecturally, the P3041NXN1MMB leverages a hierarchical datapath similar to the P4080 platform: each e500mc core has private L1 caches, while L2 is shared across cores and the Corenet coherency fabric unifies the SoC. This approach delivers high IPC while maintaining the deterministic interrupt behavior required for real-time control-plane tasks. Compared with single-core PowerQUICC III predecessors, the P3041NXN1MMB offers an order-of-magnitude throughput uplift without requiring a complete software rewrite, because the cores preserve the classic Power Architecture programming model. Typical applications include networking line cards and control-plane processing, wireless base station baseband and L2/L3 termination, industrial control and ruggedized computing, military/aerospace embedded systems (where the NonENC build is mandated), and storage controllers in mid-range RAID or NAS arrays. The 32-bit Power Architecture and the QorIQ ecosystem also make this part attractive for long-lifecycle programs that need NXP's extended product longevity commitment. Designers should plan the PCB layout around the 37.5x37.5 mm FCBGA footprint with high-density escape routing, allocate sufficient PCB layers for DDR3/3L byte-lane matching, and follow NXP's AN4137 layout guide for the SerDes reference clocks. Thermal analysis must account for industrial-grade ambient temperatures (-40C to +105C) under full four-core load. This page synthesizes distributor pricing, parametric alternatives, and practical design considerations not found in the manufacturer datasheet alone.

RFQ Liên hệ
P3041NXN1NNB QorIQ P3041 Quad-Core e500mc MPU 1.333GHz | NXP
P3041NXN1NNB

P3041NXN1NNB QorIQ P3041 Quad-Core e500mc MPU 1.333GHz | NXP

The NXP P3041NXN1NNB is a QorIQ P3041 quad-core PowerPC e500mc microprocessor that operates at up to 1.333 GHz, packaged in a 1295-ball FCBGA (37.5 mm x 37.5 mm). It belongs to NXP's P3 communications processor family, designed for wired and wireless infrastructure equipment that requires high-performance control-plane and data-plane processing. A microprocessor is an integrated circuit that contains the arithmetic logic unit, control unit, registers, and cache memory of a computer system on a single silicon die. The P3041's Power Architecture e500mc core is a superscalar core with out-of-order execution, hardware-supported multithreading, and virtualization extensions, positioning it in the hierarchy of: microprocessor -> MPU -> embedded processor -> system-on-chip class SoC. The device integrates memory controllers, high-speed serial interfaces, and acceleration engines on-chip to support networking and telecom workloads. Key features include four e500mc cores running up to 1.333 GHz, a shared 256 KB L2 cache per core plus a 2 MB platform cache, dual DDR3 memory controllers with ECC support, three 10-Gigabit Ethernet controllers (XAUI), eight Gigabit Ethernet controllers, four PCI Express 2.0 controllers, and a Serial RapidIO 2.1 interface. The part is rated for the extended industrial temperature range of -40C to +105C and qualified for ruggedized industrial and networking environments. The P3041NXN1NNB is the 'NX' suffix variant meaning it is built on the 1.1 silicon revision, supports 1333 MHz core frequency, and is supplied without SEC (Security Engine) hardware. The NNB trailing suffix indicates the extended temperature grade and tray packaging per NXP's part-numbering convention. The 1295-ball FCBGA package requires multilayer PCB design with controlled-impedance routing and matched-length pairs for SerDes lanes. Typical applications include multiservice routers, LTE base station baseband processing, industrial Ethernet gateways, and ruggedized networking appliances. The combination of quad cores, hardware-accelerated cryptography, and integrated multi-Gigabit Ethernet makes it suitable for mid-range control plane and data plane forwarding. When designing with this device, allocate substantial PCB area for the FCBGA land pattern, follow NXP's reference design for DDR3 byte-lane DMX in conventional layouts, and provide adequate thermal relief through thermal vias and heatsink attach. The 1.333 GHz excitation creates a 750 ps clock period that mandates strict signal-integrity discipline for parallel interfaces. This page synthesizes distributor pricing, drop-in alternative MPNs from the same P3041 family, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ
P3041NXN1PNB - QorIQ P3 4-Core 1.5GHz PowerPC MPU | NXP
P3041NXN1PNB

P3041NXN1PNB - QorIQ P3 4-Core 1.5GHz PowerPC MPU | NXP

The NXP (formerly Freescale) P3041NXN1PNB is a QorIQ P3 series quad-core PowerPC e500mc microprocessor running at 1.5 GHz, housed in a 1295-ball FCPBGA (37.5 x 37.5 mm) package and qualified for extended temperature operation. As the 'NXN1' ordering variant of the P3041 family, this device is supplied without the SEC (Security Engine) block, targeting embedded networking and industrial designs that do not need hardware-accelerated cryptography. A microprocessor (MPU) is the central processing unit of an embedded system, integrating one or more CPU cores, caches, memory controllers, and high-speed serial interfaces on a single die. The QorIQ P3041 sits within NXP's communications-processor taxonomy: MPU -> embedded processor -> networking SoC -> multicore communications platform. This hierarchical positioning explains why it ships with multiple 10 GbE, PCIe, and DDR3/3L controllers on-die. Key features include four e500mc PowerPC cores with hardware hypervisor and virtualization support, three tri-speed Gigabit Ethernet MACs plus a 10 Gigabit Ethernet interface, three PCIe 2.0 controllers (x4/x4/x4), a 64-bit DDR3/3L memory controller with ECC, integrated security acceleration (excluding the SEC variant), and a high-bandwidth interconnect fabric. The 1.5 GHz core frequency and large L2 cache per cluster enable wire-speed packet processing on Layer 2-4 workloads. The P3041 is built on a 45 nm silicon-on-insulator CMOS process, allowing the four cores to operate within the device's power envelope for fan-less enclosures. Designers benefit from extensive debug features including JTAG/cJTAG and on-chip trace, plus multiple boot options (NOR, NAND, SPI, eMMC) for flexible system bring-up. Typical applications include enterprise switches and routers, network-attached storage (NAS) controllers, LTE small-cell base stations, industrial control gateways, and single-board computers for telecom and defense. Its extended temperature rating makes it suitable for outdoor and factory-floor deployments. When designing with the P3041, pay close attention to the 37.5 x 37.5 mm FCPBGA land pattern: 1295 balls at 1 mm pitch demand a high-density, microvia PCB stack-up and controlled-impedance routing for the DDR3 and 10 GbE lanes. Thermal management is critical - a heatsink or cold plate is mandatory because all four cores can draw substantial current under load. This page synthesizes distributor pricing, drop-in QorIQ P3041 family alternatives, and practical PCB thermal guidance not found in the manufacturer datasheet alone.

RFQ Liên hệ
P3041NXN7MMC - QorIQ Quad-Core 1.2GHz SoC | NXP Semiconductors
P3041NXN7MMC

P3041NXN7MMC - QorIQ Quad-Core 1.2GHz SoC | NXP Semiconductors

The NXP Semiconductors P3041NXN7MMC is a QorIQ multi-core SoC integrating 4 Power Architecture e500mc cores running at 1.2 GHz, packaged in a 1295-ball FCBGA (37.5 mm x 37.5 mm). The device integrates DDR3/3L memory controllers, PCIe, SATA, Serial RapidIO (SRIO), and 1G/10GbE networking interfaces on-chip, targeting industrial, networking, and communications infrastructure applications. Operating from a -40C to +105C temperature range, it is qualified for harsh-environment deployments. A QorIQ SoC (System-on-Chip) is a highly-integrated communications processor that combines CPU cores, memory controllers, and high-speed serial I/O on a single die. QorIQ processors sit within the broader taxonomy of embedded processors -> microprocessors -> integrated circuits, and the P3041 family specifically addresses power- and cost-efficient mid-range networking workloads distinct from the higher-end P4 platform parts. Key features include 4 e500mc cores with three-level cache hierarchy, dedicated hardware accelerators for packet parsing and security, dual DDR3/3L controllers supporting up to 16 GB of addressable memory, and flexible SerDes lanes that can be software-configured between PCIe, SATA, SRIO, and Ethernet SGMII/XAUI/10GBase-T PHYs. The device delivers robust performance-per-watt and is compatible with the broader NXP QorIQ software ecosystem. Architecturally, the P3041 leverages the e500mc core (32-bit superscalar Power Architecture technology) with out-of-order execution and a coherent fabric interconnect shared across all four cores. Integrated SEC (Security Engine) blocks accelerate IPSec, SSL/TLS, and bulk cryptography in hardware, while DPAA (Data Path Acceleration Architecture) primitives offload queue, scheduling, and buffer-management tasks from the cores. Typical applications include industrial routers and switches, LTE / 4G small-cell base stations, network-attached storage controllers, smart-grid aggregation gateways, and defense/aerospace embedded networking. The wide operating temperature range and integrated multi-protocol I/O simplify BOM and reduce board area versus discrete CPU-plus-ASIC designs. When designing with this part, ensure that the FCBGA substrate and PCB stack-up meet the impedance and via-in-pad requirements for the 1295-ball 0.8 mm-pitch package; thermal management at the SoC level (typically a heat spreader or top-side heatsink) is required at full load, since the device can exceed 10 W under heavy I/O activity.

RFQ Liên hệ
P3041NXN7NNC - QorIQ P3 4-Core 1.333GHz SoC | NXP
P3041NXN7NNC

P3041NXN7NNC - QorIQ P3 4-Core 1.333GHz SoC | NXP

The NXP (formerly Freescale) P3041NXN7NNC is a QorIQ P3-series quad-core communications processor built on Power Architecture e500mc cores, clocked at 1.333 GHz, and housed in a 1295-pin FCBGA (37.5 x 37.5 mm) package rated for the -40C to +105C industrial/extended temperature range. The device integrates 4 x 32-bit e500mc cores with hardware hypervisor and virtualization support, a three-level cache hierarchy, DDR3/DDR3L memory controllers, and a rich high-speed I/O subsystem including multi-lane PCIe, SATA, Serial RapidIO (SRIO), and multiple 1/10 Gigabit Ethernet MACs, positioning it as an integrated System-on-Chip for embedded networking and control platforms. A QorIQ communications processor is a class of multicore networking SoC originally developed by Freescale and now continued under NXP. It sits in the broader taxonomy of microprocessors -> embedded MPU -> multicore SoC -> communications processor, and functions as the central compute and I/O aggregation element in routers, switches, base stations, and industrial gateways that previously required an MPU plus multiple companion ASICs. Key differentiating features of the P3041 include its heterogeneous hardware-blocks for packet processing (SEC security engine, PME pattern-matching engine), four integrated 10/100/1000 Mbps Ethernet MACs plus options for 1/10 GbE, two SATA controllers, three PCIe Gen2 controllers, and two Serial RapidIO ports. The platform supports up to 16 GB of DDR3/DDR3L with ECC at up to 1333 MT/s, and operating power is conservatively budgeted in the 15 W thermal envelope typical of the P3041 family. Architecturally, the P3041 leverages a three-level cache (32 KB I/D L1 per core, 128 KB L2 per core, and a shared 1 MB CoreNet-coherent L3), interconnect via the CoreNet coherency fabric, and accelerates common networking primitives in dedicated engines rather than burning CPU cycles on them - yielding headroom for control-plane and Linux workloads alongside data-plane forwarding. Typical applications include industrial control and HMI platforms, multi-service routers and managed switches, wireless base-station baseband, single-board computers and embedded Linux designs, secure gateways, and defense/aerospace networking equipment. The -40 to +105C temperature grade extends deployment to outdoor enclosures and vehicle telematics. When designing in the P3041, plan for a multilayer (8+ layer) PCB with matched-impedance DDR3 routing, a robust power map (the part requires multiple voltage rails), and provision for a JTAG/COP debug header. The large 37.5 mm FCBGA package demands careful reflow profiling and bottom-side land inspection. NXP's CodeWarrior and the Linux SDK are the recommended software toolchains; third-party QorIQ BSPs (ELDK, Yocto layers) are also widely available. This page consolidates distributor live-pricing, drop-in same-package alternatives, and design-side considerations beyond the manufacturer datasheet, helping sourcing engineers verify lifecycle risk and replacement options for the still-active QorIQ P3041 platform.

RFQ Liên hệ