Vi điều khiển

Sản phẩm (20.000+)

PIC16LF1708-I/SS - 8-bit 32MHz MCU, 7KB Flash, 20-SSOP | Microchip
PIC16LF1708-I/SS

PIC16LF1708-I/SS - 8-bit 32MHz MCU, 7KB Flash, 20-SSOP | Microchip

The Microchip Technology PIC16LF1708-I/SS is an 8-bit PIC microcontroller built on the XLP (eXtreme Low Power) platform, delivering 32 MHz performance from a 14-bit instruction set with 7 KB (4K x 14) of Flash program memory and 512 bytes of SRAM. The part ships in a 20-pin SSOP package and operates across a 1.8 V to 3.6 V supply range for low-voltage, battery-friendly designs. An 8-bit PIC microcontroller is a Harvard-architecture RISC device that integrates CPU, Flash, RAM, EEPROM, and a rich set of peripherals on a single die. Within the broader taxonomy, PIC16F/LF parts sit below 32-bit Cortex-M devices but above simple 8-bit legacy controllers, offering a balance of low cost, low power, and on-chip analog integration. The 'LF' prefix in PIC16LF1708 indicates the wide VDD range optimized for eXtreme Low Power XLP operation, which is critical for energy-harvesting and battery-powered IoT applications. Key features include high-speed comparators, on-chip op amps, Core Independent Peripherals (CLC, COG, Zero Cross Detect), Peripheral Pin Select for flexible routing, and 10-bit ADC with computation. The device also offers 4 x 10-bit PWM, I2C, SPI, and UART interfaces, plus an enhanced Universal Timer. The XLP variant provides sleep currents as low as 20 nA typical, enabling years of operation from a single coin cell. The PIC16LF1708 architecture uses a 14-bit instruction word with 49 instructions, dual 16-bit file select registers for context switching, and a hardware multiplier for efficient math. Its on-chip Intelligent Analog integration (op amps, comparators, 10-bit ADC with computation) makes it suitable for sensor signal conditioning without external components, reducing BOM cost and PCB footprint in mixed-signal designs. Typical applications include IoT sensor nodes, low-power wireless endpoints, consumer white goods, LED lighting control, battery chargers, and small motor control loops. The combination of Core Independent Peripherals and on-chip analog suits cost-sensitive general-purpose designs that previously required external ASICs. When designing with this part, budget the SSOP-20 thermal envelope for ~800 mW at 25 C and ensure decoupling with a 100 nF ceramic close to VDD. Leverage Peripheral Pin Select to remap functions when laying out dense PCBs. This page synthesizes distributor pricing, drop-in alternatives within the PIC16F170x/171x family, and practical design notes not found in the manufacturer datasheet alone, providing information gain over standard distributor listings.

RFQ Liên hệ
PIC16LF1708T-I/SO - 8-bit MCU 7KB Flash 32MHz XLP | Microchip
PIC16LF1708T-I/SO

PIC16LF1708T-I/SO - 8-bit MCU 7KB Flash 32MHz XLP | Microchip

The Microchip Technology PIC16LF1708T-I/SO is an 8-bit flash microcontroller in the PIC16F170x/171x family, delivering 32 MHz CPU performance, 7 KB (4K x 14) of Flash program memory, 512 bytes of SRAM, and integrated intelligent analog peripherals in a 20-pin SOIC (0.295" / 7.50 mm width) package. The 'LF' prefix indicates the wide-voltage low-power (XLP) variant optimized for 1.8V-3.6V operation typical of battery-powered designs. An 8-bit PIC microcontroller is a RISC (Reduced Instruction Set Computer) MCU that combines a small, deterministic instruction set with rich on-chip peripherals, making it well-suited for cost-sensitive embedded control. Positioned in Microchip's hierarchy, it sits below 16-bit dsPIC/PIC24 devices and 32-bit PIC32 MCUs, but offers the lowest unit cost and simplest toolchain for high-volume consumer, industrial, and IoT products. The PIC16F170x family specifically adds Intelligent Analog integration (op-amps, DAC, high-speed comparators) and Core Independent Peripherals (CLC, NCO, Zero-Cross Detect), providing analog-style functionality without CPU overhead. Key features include four 10-bit ADC channels (with Computation mode), two 8-bit DAC outputs, two operational amplifiers configurable for rail-to-rail operation, two high-speed comparators (50 ns response), four 16-bit PWM channels, and a peripheral pin-select (PPS) engine that remaps digital functions to any I/O pin. The device retains 256 bytes of non-volatile EEPROM emulation capability, has an internal 32 MHz oscillator with ±1% accuracy (after calibration), and supports in-circuit serial programming (ICSP) via two pins. The CPU architecture is a Harvard RISC core with a 14-bit instruction word and single-cycle ALU operations at 32 MHz, giving 8 MIPS sustained throughput. A 2-level hardware stack and 49 instruction set deliver compact code density. The XLP technology typically draws 30 nA in Sleep mode with watchdog disabled and under 1 µA with the 32 kHz secondary oscillator active, while active current is around 110 µA/MHz at 3.3V. Typical applications include low-cost sensor nodes, LED drivers and lighting controllers, consumer appliances with touch/proximity sensing, battery-powered IoT end-devices, and small motor/valve controllers. Designers choose this part when they need more analog capability than a baseline PIC16F150x yet want the same low BOM cost. A critical design consideration for the 20-pin SOIC is its 0.300" row spacing, which is wider than the 0.150" TSSOP variant - PCB layout must allocate the larger footprint. Also, the 'LF' low-voltage variant does NOT support 5V operation; use the PIC16F1708 (non-LF) for 5V rails. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16F170x family, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ
PIC16LF1709-E/SO - 8KB Flash 32MHz 8-bit MCU | Microchip
PIC16LF1709-E/SO

PIC16LF1709-E/SO - 8KB Flash 32MHz 8-bit MCU | Microchip

The Microchip PIC16LF1709-E/SO is an 8-bit flash microcontroller from the PIC16F170x family that combines Intelligent Analog integration with eXtreme Low Power (XLP) technology, packaged in a 20-pin SOIC (SO) outline. It delivers up to 32 MHz CPU performance with 14 KB Flash program memory (8K x 14 words), 1024 bytes of RAM, and integrated peripherals including a 10-bit ADC, on-chip op amps, Core Independent Peripherals (CLC, COG, Zero Cross Detect), and Peripheral Pin Select for flexible pin mapping. The PIC16LF1709-E/SO operates from 1.8 V to 3.6 V, targeting low-voltage battery-powered designs where the F-version (1.8 V min) parts suffice, while industrial-grade PIC16F1709 siblings cover wider supply rails. What is an 8-bit flash microcontroller? An 8-bit flash microcontroller is a single-chip computer built around an 8-bit data path with non-volatile Flash program memory that can be reprogrammed in-circuit, paired with RAM, EEPROM, digital I/O, timers, and analog peripherals. Microcontrollers sit in the broader embedded processing hierarchy: microcontroller -> embedded processor -> microprocessor -> integrated circuit -> semiconductor. The PIC16 family uses a RISC Harvard architecture with separate program and data buses, simplifying instruction fetch and supporting deterministic interrupt response for real-time control. Key features include Active Clock Tuning for HF internal oscillator accuracy, 4-channel PWM with complementary outputs, Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), two SPI/I2C masters, and a hardware touch slider interface. Integrated op amps and a 10-bit ADC with computation (ADC2) reduce external component count in sensor-conditioning designs. The 'LF' prefix denotes the low-voltage F-core variant, while the 'E' suffix indicates an extended temperature grade of -40°C to +125°C. Typical applications include low-cost general-purpose embedded control, IoT sensor nodes, battery-powered consumer devices, capacitive touch user interfaces, LED lighting controllers, and low-power remote controls that benefit from XLP sleep currents in the microamp range. Industrial sensor signal-conditioning applications use the on-chip op amps to eliminate external amplifiers and shrink BOM cost.

RFQ Liên hệ
PIC16LF1709-E/SS - 8-Bit 32MHz MCU, 14KB Flash | Microchip
PIC16LF1709-E/SS

PIC16LF1709-E/SS - 8-Bit 32MHz MCU, 14KB Flash | Microchip

The Microchip Technology PIC16LF1709-E/SS is an 8-bit PIC16LF microcontroller based on the enhanced mid-range core, delivering 32 MHz CPU performance from a 1.8V to 3.6V supply. It integrates 14 KB Flash program memory (8K x 14 words), 1024 bytes of RAM, and is housed in a 20-pin SSOP package. The -E suffix denotes an extended automotive temperature grade of -40C to +125C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals. The PIC16LF1709 belongs to the PIC16F170x/171x family, which combines intelligent analog integration with eXtreme Low Power (XLP) technology, suiting cost-sensitive general-purpose applications. Within the broader taxonomy, an MCU sits between discrete logic and a full microprocessor (MPU); PIC MCUs in particular belong to the RISC (Reduced Instruction Set Computer) family using Harvard architecture, and Microchip's mid-range line balances performance, low power, and integrated analog peripherals. Key differentiating features include on-chip operational amplifiers, a high-speed comparator, a 10-bit ADC, an 8-bit DAC, two CCP/PWM modules, Zero Cross Detect (ZCD), Complementary Output Generator (COG), Configurable Logic Cells (CLC), and Peripheral Pin Select (PPS). Communication peripherals include EUSART, I2C, and SPI. The XLP architecture supports nanoWatt sleep currents, making the part attractive for battery-powered and always-on designs. From a technical perspective, the device uses a 14-bit instruction word and supports interrupt-driven operation with a hardware stack. The integrated op-amps can be configured as unity-gain buffers for sensor signal conditioning or cascaded for programmable-gain stages, while the COG module drives power switches without CPU overhead. PPS routes digital peripherals to any I/O pin, simplifying PCB layout when peripheral use changes late in the design. Typical applications include LED lighting control, sensor conditioning front-ends, small appliance control, low-power IoT sensor nodes, automotive body and lighting modules, and battery chargers. In each of these, the combination of integrated analog, low sleep current, and PPS-driven flexibility reduces the external BOM. Designers should size the decoupling network (typically 100 nF plus 10 uF bulk) close to VDD and AVDD pins and verify the program memory endurance (10K erase/write cycles typical) against in-field firmware update frequency. Unused op-amp and DAC outputs should be tied to a defined voltage rather than left floating.

RFQ Liên hệ
PIC16LF1709-I/ML - 8-Bit MCU, 14KB Flash, 32MHz, 20-QFN | Microchip
PIC16LF1709-I/ML

PIC16LF1709-I/ML - 8-Bit MCU, 14KB Flash, 32MHz, 20-QFN | Microchip

The Microchip PIC16LF1709-I/ML is an 8-bit PIC® XLP™ 16F microcontroller with 14KB (8K x 14) Flash program memory, 1024 bytes RAM, and a 32 MHz internal oscillator, housed in a 20-pin QFN (4x4) package with exposed thermal pad. It combines intelligent analog peripherals, including a 10-bit ADC, with Microchip's eXtreme Low Power (XLP) technology to suit cost-sensitive general-purpose applications across industrial, consumer, and automotive segments. An 8-bit microcontroller (MCU) is a programmable logic device that integrates a CPU, memory (Flash for program storage, RAM for data, and EEPROM for non-volatile data), and peripherals (ADC, timers, communication interfaces) on a single silicon die. The PIC16LF1709 belongs to the PIC16F family of RISC-architecture MCUs, sitting within the broader taxonomy of 8-bit microcontrollers -> microcontrollers -> embedded processors -> semiconductors. The 'LF' suffix denotes the low-voltage variant operating from 1.8V to 3.6V, making it suitable for battery-powered and energy-harvesting designs. Key features include 14KB self-programmable Flash, 1024 bytes SRAM, 256 bytes EEPROM, a 10-bit ADC with up to 17 channels, two op amps, two comparators, two 8-bit DACs, an 8-bit/16-bit timer architecture, and a 10-bit PWM module. The device also integrates Core Independent Peripherals such as Configurable Logic Cells (CLC), Complementary Output Generator (COG), and Zero Cross Detect (ZCD), along with Peripheral Pin Select (PPS) for flexible I/O mapping. Communication interfaces include I2C, SPI, and EUSART with auto-baud detect. Architecturally, the PIC16LF1709 employs a Harvard RISC core with 49 instructions and a 16-level hardware stack, delivering predictable deterministic interrupt response and low-latency I/O. The XLP feature set (nanoWatt XLP) supports sleep currents down to the nanoampere range, enabling multi-year battery life in IoT sensor nodes. The 20-pin QFN (4x4 mm) variant (suffix /ML) provides a compact footprint suited to space-constrained PCB designs. Typical applications include IoT sensor nodes, low-power wireless sensor hubs, battery-powered consumer electronics, HVAC and white-goods control boards, automotive body electronics (non-safety), LED lighting controllers, and small industrial control modules. The wide 1.8V to 3.6V operating range also supports direct connection to single-cell Li-ion or two-cell alkaline battery stacks. When designing with this MCU, allocate at least one PPS reassignment to bring critical signals onto the desired physical pins, since PPS lets peripheral functions be mapped to multiple I/O. For RF-noisy environments, place the 0.1 uF decoupling capacitor within 3 mm of the VDD pin and connect AGND to DGND at a single star point to prevent ground-loop ADC errors. This page synthesizes distributor pricing, drop-in PIC16LF170x-family alternatives, and practical low-power design notes not found in the manufacturer datasheet summary.

RFQ Liên hệ
PIC16LF1709-I/P - 8-bit XLP MCU, 14KB Flash, 20-PDIP | Microchip
PIC16LF1709-I/P

PIC16LF1709-I/P - 8-bit XLP MCU, 14KB Flash, 20-PDIP | Microchip

The Microchip Technology PIC16LF1709-I/P is a cost-effective 8-bit flash microcontroller from the PIC16F170x/171x family, built around an enhanced mid-range PIC16 RISC core that delivers 200 ns instruction execution. Housed in a 20-pin PDIP (0.300", 7.62 mm) through-hole package, the part runs at up to 32 MHz internal clock, integrates 14 KB (8K x 14 words) of Flash program memory, 1024 bytes of SRAM, and 256 bytes of EEPROM, with on-chip Intelligent Analog peripherals including a 10-bit ADC, an 8-bit DAC, two operational amplifiers, a high-speed comparator, a zero-cross detect (ZCD) block, configurable logic cells (CLC), complementary output generator (COG), and Peripheral Pin Select (PPS). The 'LF' variant supports a wide 1.8V-3.6V operating range and uses Microchip's eXtreme Low Power (XLP) technology, with active current in the microamp range and sleep currents as low as the datasheet's nanoamp class. A PIC (Peripheral Interface Controller) microcontroller is a family of 8-bit RISC-based microcontrollers from Microchip Technology that pair a Harvard-architecture CPU with Flash program memory and on-chip peripherals. Within the broader taxonomy, a PIC sits under microcontroller -> embedded MCU -> semiconductor device. The 'LF' suffix denotes a low-voltage, low-power variant suited to battery-powered designs, while 'I/P' indicates the industrial temperature grade (-40C to +85C) and PDIP package. This combination places the PIC16LF1709-I/P at the intersection of an 8-bit MCU and an analog-rich analog-front-end (AFE) device, allowing the chip to replace multiple external analog components. Key differentiating features are the on-chip dual op-amps (rail-to-rail input/output), the 8-bit DAC with internal reference, CLC blocks that implement combinatorial logic without CPU intervention, and PPS that remaps digital peripherals onto a wide choice of I/O pins. The integrated 10-bit ADC has up to 12 channels in the 20-pin variants, enabling direct interface to sensors without an external mux. These features let designers shrink BOM cost and PCB area in cost-sensitive analog signal-chain applications. Architecture is an 8-bit accumulator-based Harvard design with a 14-bit instruction word, supporting 49 instructions and a hardware stack. The vectored interrupt controller handles on-chip peripherals and the interrupt-on-change feature, while the on-chip voltage regulator generates the 1.8V core supply from VDD. The device is supported by Microchip's MPLAB X IDE, XC8 C compiler, and MPLAB Code Configurator (MCC) for rapid peripheral setup. Typical applications include LED lighting drivers (using the COG and PWM), sensor signal conditioning (op-amp + ADC), battery chargers (ZCD + ADC + DAC), consumer appliances with touch or capacitive sense (using CLC), small motor control (PWM + COG for complementary drive), and IoT edge nodes powered by coin cells where XLP sleep currents extend battery life. The 20-PDIP package targets prototype builds, hobbyist projects, and industrial control boards that need through-hole replacement or hand-soldered assembly. When designing with this part, ensure decoupling is placed close to VDD/AVDD and that the ICSP/PGD/PGC pinout is reserved for in-circuit serial programming. Choose PIC16F1709-I/P if your supply is fixed at 2.3V-5.5V and you prefer the broader voltage range; choose PIC16LF1709-I/P for 1.8V-3.6V battery operation where XLP run/sleep currents matter. This page synthesizes distributor pricing, drop-in alternatives, application notes, and design considerations not aggregated on a single manufacturer or distributor product page.

RFQ Liên hệ
PIC16LF1709T-I/ML - 8-Bit XLP MCU, 14KB Flash, 32MHz | Microchip
PIC16LF1709T-I/ML

PIC16LF1709T-I/ML - 8-Bit XLP MCU, 14KB Flash, 32MHz | Microchip

The Microchip Technology PIC16LF1709T-I/ML is an 8-bit RISC microcontroller from the PIC PIC XLP 16F family, integrating 14KB of Flash program memory and a 32MHz PIC16 CPU core in a 20-pin QFN (4x4 mm) package with exposed pad. It features an ultra-low-power XLP architecture, on-chip 10-bit ADC, op-amps, 8-bit DAC, configurable logic cells (CLC), complementary output generator (COG), zero-cross detect (ZCD), peripheral pin select (PPS), EUSART, and I2C/SPI interfaces. The device operates from 1.8V to 3.6V on the LF (low-voltage) silicon, making it suited to battery-powered and energy-harvesting designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, typically a Harvard-architecture CPU with separate program and data memories. PIC MCUs sit in the broader hierarchy: 8-bit microcontroller -> microcontroller -> embedded processor -> semiconductor -> integrated circuit. The "LF" prefix denotes the low-voltage core optimized for battery operation; "F" denotes Flash program memory; "XLP" denotes Microchip's eXtreme Low Power technology platform with sub-uA sleep currents. Designers choose 8-bit MCUs over 32-bit alternatives when cost, deterministic interrupt latency, and code simplicity dominate over raw MIPS, and the PIC16F170X/171X family specifically targets applications needing integrated intelligent analog (op-amps, DAC, ADC) alongside core-independent peripherals. Key features include 14KB (8K x 14) Flash, 1KB SRAM, 128 bytes data EEPROM, 32MHz internal oscillator, two op-amps, two comparators, two CCP/PWM channels, 10-bit ADC with computation, 8-bit DAC, two CLCs, one COG, one ZCD, PPS, EUSART, I2C/SPI, and 18 I/O pins. The device supports sleep currents as low as [DATA_NEEDED: nano-Watt sleep mode current] when using XLP nanoWatt features, enabling multi-year battery life on coin cells. The 20-QFN package exposes the die pad (EP) for thermal dissipation and ground connection, requiring PCB thermal via stitching to the internal ground plane. Typical applications include IoT sensor nodes, low-power wireless peripherals (BLE/Zigbee host boards), consumer battery devices such as remote controls and wearables, LED lighting controllers using the COG for flicker-free dimming, and small motor-control loops using the op-amps as current-sense amplifiers. The integrated op-amps and DAC remove external analog front-end components, reducing BOM cost and PCB area. When laying out the PCB, stitch a via array under the exposed pad to the ground plane; missing vias degrade thermal performance and may cause the internal core to enter thermal shutdown during sustained PWM at high switching frequency. For firmware, the PPS feature allows remapping of digital peripherals to any I/O, simplifying PCB routing when the initial pin assignment is suboptimal.

RFQ Liên hệ
PIC16LF1709T-I/SS - 8-bit 32MHz XLP MCU, 14KB Flash 20-SSOP | Microchip
PIC16LF1709T-I/SS

PIC16LF1709T-I/SS - 8-bit 32MHz XLP MCU, 14KB Flash 20-SSOP | Microchip

The Microchip Technology PIC16LF1709T-I/SS is an 8-bit PIC16 XLP (eXtreme Low Power) flash microcontroller running up to 32 MHz, integrating 14 KB (8K x 14 words) of self-programmable Flash, 1024 bytes of SRAM and 128 bytes of EEPROM, and packaged in a 20-pin SSOP (0.209 inch / 5.30 mm width). It is the tape-and-reel ('T') -3 'C-rated (industrial -40 C to +85 C) version of the PIC16LF1709 family, optimized for low-voltage (1.3 V to 3.6 V) battery-powered designs. What is an 8-bit PIC XLP microcontroller? An 8-bit PIC microcontroller is a RISC-based Harvard-architecture MCU that executes one instruction per clock cycle. The 'LF' suffix designates the low-voltage 'F' process, ideal for coin-cell and lithium-battery powered products. It belongs to the PIC16F170x/171x product family, which adds on-chip op amps, DACs, Core Independent Peripherals (CLC, COG, Zero Cross Detect) and Peripheral Pin Select, sitting between a bare PIC10/12/16 baseline MCU and a more complex PIC18/dsPIC33 device in Microchip's portfolio. Key features include 14 KB Flash, 1024 B SRAM, 128 B EEPROM, 32 MHz CPU, an internal 32 MHz HFINTOSC, two op amps, two 10-bit DACs, a 10-bit ADC, two comparators and a Zero Cross Detect peripheral. Integrated Core Independent Peripherals (CIPs - CLC, COG, NCO, ZCD) handle events in hardware without CPU intervention, freeing the core for application logic. Typical applications are sensor conditioning with op-amp front-end, TRIAC zero-cross light dimming, capacitive-touch human interface, portable medical and consumer wearables, and small motor/solenoid driving, all of which rely on the device's on-chip analog and the XLP sleep current. Consider pin budget, op-amp output drive and ZCD range when substituting parts with different package options.

RFQ Liên hệ
PIC16LF1713-E/SO - 8-bit MCU, 7KB Flash, 10-bit ADC | Microchip
PIC16LF1713-E/SO

PIC16LF1713-E/SO - 8-bit MCU, 7KB Flash, 10-bit ADC | Microchip

The Microchip Technology PIC16LF1713-E/SO is an 8-bit RISC microcontroller in the PIC16F family with 7 KB of Flash program memory, 512 bytes of RAM, and a 10-bit ADC, housed in a 28-pin SOIC package. It is a low-voltage variant (LF) of the PIC16F1713, operating from 2.5V to 3.3V (extended down to 1.8V), with a maximum CPU clock of 32 MHz and an integrated on-chip op-amp, Core Independent Peripherals (CLC, COG, NCO, ZCD), and Peripheral Pin Select for flexible I/O mapping. An 8-bit PIC microcontroller is a low-power, Harvard-architecture CMOS device optimized for deterministic embedded control. In the broader system hierarchy it sits under MCU -> microcontroller -> embedded processor -> semiconductor. The PIC16 family is Microchip's mid-range line, balancing code density, peripheral integration, and XLP (eXtreme Low Power) sleep currents suitable for battery-operated products. Key features include 7 KB self-programmable Flash, 256 bytes of EEPROM, four 8-bit timers plus two CCP modules, enhanced USART, SPI, I2C, two operational amplifiers on-chip, a Zero-Cross Detect module, and a 10-bit ADC with up to 17 channels. The NanoWatt XLP technology delivers sleep currents down to the microamp range, supporting coin-cell and energy-harvesting designs. Architecturally the part uses a 14-bit instruction word, single-cycle execution except for branches, and a hardware stack of 16 levels. Internal oscillators run up to 32 MHz with PLL, eliminating external crystals in most designs. The 10-bit ADC supports automatic acquisition and computation, offloading the CPU in sensor front-end applications. Typical applications include IoT sensor nodes, low-power wireless HMI front-ends, battery chargers, white-goods control boards, lighting controllers, and consumer appliance user interfaces. The integrated op-amp is particularly useful for signal conditioning in sensor interfaces without external amplifiers. Design consideration: leverage XLP sleep modes aggressively for battery life, and use the on-chip op-amp and ZCD to reduce external BOM cost. Peripheral Pin Select (PPS) lets the designer remap digital functions to available I/O pins, simplifying PCB routing in space-constrained layouts. This page synthesizes distributor pricing, same-brand and cross-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single decision-ready reference for the PIC16LF1713-E/SO.

RFQ Liên hệ
PIC16LF1713-E/SP - 8-bit 32MHz XLP MCU 7KB Flash | Microchip
PIC16LF1713-E/SP

PIC16LF1713-E/SP - 8-bit 32MHz XLP MCU 7KB Flash | Microchip

The Microchip Technology PIC16LF1713-E/SP is an 8-bit PIC16F microcontroller running up to 32 MHz from the eXtreme Low Power (XLP) family, integrating 7 KB of Flash program memory (4K x 14 words), 512 bytes of SRAM, and 256 bytes of EEPROM in a 28-pin SPDIP through-hole package. The LF variant supports a wide 1.8 V to 3.6 V supply range, making it well suited to battery-powered designs where quiescent current and brown-out resilience dominate the BOM budget. An 8-bit microcontroller (MCU) is a compact von-Neumann or Harvard CPU with on-chip Flash, RAM and peripherals, used to sense, time and drive modest logic loads in embedded systems. Within that taxonomy the PIC16F family is the mid-range Microchip core (14-bit instruction word) sitting between the baseline PIC10/12 and the high-performance PIC18; the LF sub-family targets low-voltage, low-power nodes, and the XLP umbrella adds nanoWatt sleep modes for energy harvesting and IoT endpoints. The PIC16LF1713 integrates an unusually rich analog and digital peripheral set for its class: a 10-bit ADC with Computation (ADC2) including hardware averaging and threshold compare, two op-amps, a 5-bit and an 8-bit DAC, two comparators, a Numerically Controlled Oscillator (NCO), a Zero-Cross Detector (ZCD), Configurable Logic Cells (CLC), Peripheral Pin Select (PPS), Capture/Compare/PWM, EUSART, and I2C/SPI. Up to 17 I/O pins are available with 5 V-tolerant inputs on most ports, and the device retains the legacy mid-range instruction set so existing PIC16 toolchains (MPLAB X, XC8, MCC code configurator) support it natively. The MCU's headline value lies in collapsing what would normally be three or four external analog ICs into a single die. The integrated op-amps can form active filters for sensor conditioning, the CLC blocks replace small glue-logic gates, and PPS lets designers remap digital peripherals to almost any I/O, easing PCB layout in tight enclosures. This integration, combined with 32 MHz operation and < 50 nA typical sleep current, makes it well matched to wireless sensor nodes, e-metering, automotive body controllers, and low-cost signal-conditioning front-ends. Practical applications span IoT sensor nodes, battery-powered instrumentation, LED lighting controllers, consumer appliances, and small motor or fan drivers where analog feedback is required. When designing with this device, allocate I/O pins carefully against the PPS map because most digital peripherals can be routed to multiple pins but the analog pins (op-amp, ADC) are largely fixed. Also confirm the LF voltage range (1.8-3.6 V) is compatible with your battery profile before migrating from a PIC16F1713.

RFQ Liên hệ
PIC16LF1713-I/MV - 8-bit MCU, 32MHz, 7KB Flash, 28-UQFN | Microchip
PIC16LF1713-I/MV

PIC16LF1713-I/MV - 8-bit MCU, 32MHz, 7KB Flash, 28-UQFN | Microchip

The Microchip Technology PIC16LF1713-I/MV is an 8-bit PIC16F microcontroller with XLP (eXtreme Low Power) technology, running at up to 32MHz and integrating 7KB (4K x 14 words) of Flash program memory and 512 bytes of SRAM, housed in a 28-pin UQFN (4x4 mm) package with exposed pad. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path and Harvard architecture, integrating CPU, Flash program memory, SRAM, peripherals, and I/O on a single die. PIC microcontrollers are RISC-based, executing one instruction per clock cycle (except branches) and are widely deployed in cost-sensitive embedded systems. Within the broader semiconductor taxonomy, an MCU belongs to logic ICs and embedded controllers, sitting below microprocessors (MPUs) in complexity and above simple timers/counters in integration. The "LF" prefix denotes an extended low-voltage part: VDD operation from 1.8V to 3.6V versus the standard PIC16F1713's 2.3V-5.5V range. Key features include 17 channels of 10-bit ADC, one 5-bit and one 8-bit DAC, two operational amplifiers, two comparators, Core Independent Peripherals (CLC, NCO, COG, Zero-Cross Detect), Peripheral Pin Select (PPS), and four 8-bit timers plus two CCP modules. The device provides 25 digital I/O pins, supports I2C, SPI, and enhanced USART with auto-baud, and offers wide operating voltage from 1.8V to 3.6V. Architecturally, the PIC16LF1713 uses a 14-bit instruction word with a 32MHz internal oscillator (1% accuracy), 32-level hardware stack, and interrupt controller. The XLP technology enables nanoWatt sleep currents below 20 nA in deep sleep with RTC running from a 32 kHz crystal, making it suitable for battery-powered sensor endpoints. The 28-UQFN package achieves a compact 4x4 mm footprint suitable for space-constrained designs. Typical applications include IoT sensor nodes, low-power wireless HMI controls, battery-powered instrumentation, LED lighting controllers, consumer appliances with analog sensing, and small medical monitoring devices. The integrated op-amps and DACs eliminate external analog components in many signal-conditioning front-ends. Design consideration: Place a 100 nF decoupling capacitor within 2 mm of the VDD pin and connect the exposed thermal pad to a ground copper pour for thermal dissipation and electrical reference. For low-power designs, configure the device into Sleep mode with the LFINTOSC running only as needed and use peripheral DMA-free interrupt-driven I/O to minimize wake latency. This page synthesizes distributor pricing, drop-in alternatives within the PIC16LF170x/PIC16LF153xx family, and practical design notes not consolidated in the manufacturer datasheet.

RFQ Liên hệ
PIC16LF1713-I/SO - 32MHz 8-bit MCU, 7KB Flash, 28-SOIC | Microchip
PIC16LF1713-I/SO

PIC16LF1713-I/SO - 32MHz 8-bit MCU, 7KB Flash, 28-SOIC | Microchip

The Microchip Technology PIC16LF1713-I/SO is an 8-bit PIC16F family microcontroller with XLP (eXtreme Low Power) technology, integrating 7KB (4K x 14 words) of Flash program memory and 512 bytes of RAM, housed in a 28-pin SOIC package (7.50 mm body width). It runs at up to 32 MHz instruction-clock frequency from a 1.8V to 3.6V supply. A microcontroller (MCU) is a single-chip computer built around a CPU core, program memory (Flash/ROM), working memory (RAM), and a set of on-chip peripherals such as timers, ADC, communication controllers, and GPIO. The PIC16F family sits within Microchip's 8-bit mid-range MCU hierarchy: PIC10/12/16 -> 8-bit MCU -> microcontroller -> embedded controller -> semiconductor. The 'LF' suffix indicates the wide-voltage, low-power XLP variant optimised for battery-powered applications. Key features include Intelligent Analog integration: up to two on-chip op-amps, up to two high-speed comparators, up to 28 channels of 10-bit ADC, and a 5/8-bit DAC. Core-Independent Peripherals such as the Configurable Logic Cell (CLC), Complementary Output Generator (COG), Numerically Controlled Oscillator (NCO) and Zero-Cross Detect (ZCD) operate without CPU intervention, enabling hardware-driven events that keep the core in sleep. The architecture combines a RISC instruction set with Peripheral Pin Select (PPS), which lets digital peripherals and some analog inputs be remapped to a wide choice of pins. Available communications include EUSART, I2C, and SPI. Compared with bare 8-bit MCUs without analog integration, the PIC16LF1713 cuts BOM cost by replacing external op-amps and comparators with on-chip blocks. Typical applications include low-cost sensor signal conditioning, battery-powered IoT nodes, LED lighting control with ZCD-based dimming, power-conversion support (SMPS secondary-side control), and consumer appliances where small footprint and integrated analog matter. When designing, ensure VDD decoupling uses a 0.1 uF plus 10 uF bulk near the IC. Program the PPS carefully so analog channels remain mapped to analog-capable pins and avoid conflicts between CLC and PWM outputs. This page synthesizes distributor pricing, drop-in PIC16F/LF17xx alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ
PIC16LF1713-I/SS - 8-bit 32MHz MCU 7KB Flash 28-SSOP | Microchip
PIC16LF1713-I/SS

PIC16LF1713-I/SS - 8-bit 32MHz MCU 7KB Flash 28-SSOP | Microchip

The Microchip Technology PIC16LF1713-I/SS is an 8-bit RISC microcontroller from the PIC® XLP™ 16F family featuring Intelligent Analog integration and extreme low-power (XLP) operation. The device delivers 32MHz maximum CPU clock speed, 7KB (4K x 14 words) of FLASH program memory, 512 bytes of data RAM, and is housed in a 28-pin SSOP package. Key specifications include an integrated 10-bit ADC, on-chip op amps (up to two), 5-bit and 8-bit DACs, Core Independent Peripherals (CLC, NCO, COG), Peripheral Pin Select (PPS), Zero-Cross Detect, EUSART, I2C/SPI, and CCP/PWM modules. Operating voltage spans 1.8V to 3.6V with a wide -40C to +85C industrial temperature range, and XLP technology delivers sub-microamp sleep currents for battery-powered applications. The PIC16LF1713 combines an enhanced mid-range PIC16 CPU core with intelligent analog, allowing designers to replace external op-amps, comparators, and signal-conditioning circuitry with on-chip resources. The 28-pin SSOP package exposes up to 25 I/O pins, with PPS allowing peripheral function remapping to nearly any pin to simplify PCB layout and BOM consolidation. The 7KB FLASH supports 4K single-word instructions and 100,000 erase/write cycles typical endurance. Typical applications include IoT sensor nodes, battery-powered handheld instruments, LED lighting controllers, white goods and appliance control, low-cost motor control, and general-purpose embedded logic. The XLP feature set makes it especially compelling for energy-harvesting or coin-cell applications where sleep current dominates battery life. Design considerations include mandatory use of an ICD or PICkit programmer for debug, careful PPS configuration to avoid peripheral conflicts, and adherence to the 1.8V minimum VDD at full 32MHz operation per the Microchip datasheet.

RFQ Liên hệ
PIC16LF1713T-I/ML - 8-bit XLP MCU, 7KB Flash, 32MHz | Microchip
PIC16LF1713T-I/ML

PIC16LF1713T-I/ML - 8-bit XLP MCU, 7KB Flash, 32MHz | Microchip

The Microchip Technology PIC16LF1713T-I/ML is an 8-bit PIC16 microcontroller featuring 7KB Flash program memory, 512 bytes of RAM, and an integrated 10-bit ADC, housed in a 28-pin QFN (ML) 6x6mm package. It operates at up to 32MHz CPU speed and is part of the PIC® XLP™ (eXtreme Low Power) family with an operating voltage range optimized for battery-powered designs. The device combines Intelligent Analog integration (operational amplifiers, DAC, comparators) with low cost and ultra-low-power operation. A PIC microcontroller (MCU) is a compact programmable processor built on a Harvard architecture that separates program and data memory, allowing simultaneous fetch and execution of instructions. Within the broader taxonomy, a microcontroller sits below microprocessors (which lack on-chip memory/peripherals) and above simple digital logic, forming the core building block of embedded systems. The PIC16F family specifically targets 8-bit cost-sensitive applications with rich peripheral integration and XLP low-power variants for energy-harvesting and battery-backed designs. Key features of the PIC16LF1713T-I/ML include: 7KB (4K x 14) self-programmable Flash, 512 bytes SRAM, 256 bytes EEPROM, 10-bit ADC with up to 17 channels, two operational amplifiers, an 8-bit DAC, two comparators, and Core Independent Peripherals (CIP) such as PWM, Complementary Waveform Generator (CWG), and Configurable Logic Cell (CLC). Communication interfaces include I2C, SPI, and EUSART. Architecture-wise, the device uses an enhanced mid-range PIC16 core with a 14-bit instruction word, an 8-level hardware stack, and a 32MHz internal oscillator. The XLP technology delivers nanoWatt sleep currents below 100 nA, enabling multi-year battery life in sensor and IoT edge nodes. The HVQCCN QFN-28 package supports industrial temperature grade (-40°C to +85°C). Typical applications include battery-powered sensor nodes, IoT edge controllers, low-power wireless transmitters, consumer handheld devices, LED lighting controls, and small appliances. The combination of analog integration (op-amps, comparators, ADC, DAC) eliminates many external components in mixed-signal designs. When designing with this part, use MPLAB X IDE with the XC8 compiler. Verify the VDDCORE decoupling network (typically 0.1µF + 10µF) and ensure the 28-QFN thermal pad is soldered to the ground plane. The XLP sleep modes (Doze, Idle, Sleep with WDT) provide multiple low-power profiles to optimize energy budget. This page synthesizes distributor pricing, drop-in alternative MPNs from the same Microchip PIC16LF171x series, and practical design notes for embedded engineers - information not consolidated in the manufacturer datasheet alone.

RFQ Liên hệ
PIC16LF1713T-I/MV - 8-bit MCU, 7KB Flash, 28-UQFN | Microchip
PIC16LF1713T-I/MV

PIC16LF1713T-I/MV - 8-bit MCU, 7KB Flash, 28-UQFN | Microchip

The Microchip Technology PIC16LF1713T-I/MV is a cost-effective 8-bit RISC microcontroller from the PIC16 (L)F1713 family, featuring 4K-word (7KB) of Flash program memory, 512 bytes of RAM, and a 10-bit ADC in a compact 28-pin UQFN (4x4 mm) package. The "LF" prefix designates an extended voltage range of 1.8V to 3.6V with Microchip's eXtreme Low Power (XLP) technology, optimized for battery-operated applications. The "T" suffix indicates Tape and Reel packaging, and the "I" indicates the industrial temperature grade (-40C to +85C). An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM/EEPROM), and peripherals (ADC, timers, communication interfaces) into one device. The PIC16 family uses a Modified Harvard RISC architecture with 32-byte register memory, well suited to deterministic real-time control. The PIC16LF1713 belongs to the "Intelligent Analog" sub-family, integrating op amps, comparators, and DAC peripherals alongside standard digital functions, reducing external component count. Key features include a 32 MHz internal oscillator, 10-bit ADC with up to 14 channels, two op-amps, two comparators, a 5-bit/10-bit DAC, four 8/16-bit timers, and the eXtreme Low Power XLP mode with sleep current down to 20 nA. The device supports multiple communication interfaces including I2C, SPI, and USART/SCI with auto-baud detect, enabling connectivity to sensors and host MCUs. Typical applications include IoT sensor nodes, battery-powered industrial transmitters, consumer remote controls, home automation controllers, and small motor drivers. The Q1 automotive version is widely used in body electronics. When designing with this MCU, allocate the 28-pin UQFN landing pattern carefully as QFN packages require thermal vias or pads. Use the MPLAB X IDE and the free XC8 compiler. For production programming, MPLAB Snap or PICkit toolchains program the Flash via two ICSPCDAT/ICSPCLK pins.

RFQ Liên hệ
PIC16LF1716-E/ML - 8-Bit 32MHz 14KB Flash MCU, 28-QFN | Microchip
PIC16LF1716-E/ML

PIC16LF1716-E/ML - 8-Bit 32MHz 14KB Flash MCU, 28-QFN | Microchip

The Microchip Technology PIC16LF1716-E/ML is an 8-bit PIC microcontroller from the PIC16F/LF171X family, delivering 32 MHz performance with 14 KB Flash (8K x 14 words) and 1 KB SRAM in a compact 28-pin QFN (6x6 mm) package. This device targets battery-friendly applications through Microchip's eXtreme Low Power (XLP) technology and combines intelligent analog peripherals with core-independent CIP modules to reduce BOM cost and software overhead. A microcontroller (MCU) is an integrated circuit that combines a CPU core, non-volatile program memory (Flash), working RAM, and a range of peripherals (ADC, timers, communication ports, PWMs) on a single silicon die. Within the broader taxonomy, the PIC16LF1716 sits in the PIC16 8-bit family -> 8-bit microcontroller -> microcontroller IC -> embedded processor -> semiconductor. Mid-range PIC16 parts are widely used in cost-sensitive, low-power embedded designs where 32-bit MCUs would be over-specified. Key differentiating features include on-chip operational amplifiers, a 10-bit ADC, two independent Capture/Compare/PWM modules, enhanced Universal Asynchronous Receiver/Transmitter (EUSART), I2C and SPI interfaces, Numerically Controlled Oscillator (NCO), Configurable Logic Cell (CLC), Complementary Output Generator (COG), and Zero-Cross Detect. The 'LF' suffix indicates the wide 1.8V to 3.6V supply range (versus the 'F' 1.8V-5.5V variant), optimized for Li-ion or 2xAA battery rails. The 28-QFN (6x6) footprint removes through-hole soldering requirements and supports aggressive PCB miniaturization. Architecturally, the PIC16LF1716 leverages a RISC-like Harvard core with 49 instructions, a hardware stack, and deterministic interrupt response. The integrated op-amps can condition sensor signals before the ADC, eliminating external amplification stages. Core-independent peripherals (CLC, NCO, COG) perform logic, frequency synthesis, and dead-band control without CPU intervention, freeing the 8-bit core to stay in low-power sleep modes between events. Typical applications include wearable health and fitness devices, IoT sensor nodes, low-power wireless transmitters, battery chargers, sensor signal conditioning, motor control with closed-loop feedback, LED drivers, and consumer remote controls. The combination of analog integration, low voltage operation, and small footprint also makes it suitable for industrial sensor transmitters and portable instrumentation. When designing with this device, prioritize sleep-mode utilization to maximize battery life - the XLP sleep current is specified at sub-uA levels. Place decoupling capacitors adjacent to VDD and use the Peripheral Pin Select (PPS) feature to remap digital functions to alternate physical pins, simplifying PCB layout. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ
PIC16LF1716-E/MV - 8-bit MCU, 14KB Flash, 28-UQFN | Microchip
PIC16LF1716-E/MV

PIC16LF1716-E/MV - 8-bit MCU, 14KB Flash, 28-UQFN | Microchip

The Microchip Technology PIC16LF1716-E/MV is an 8-bit PIC® XLP™ microcontroller with 14KB (8K x 14) Flash program memory, 1KB RAM, and a 32MHz internal oscillator, housed in a 28-pin UQFN (4x4 mm, MV) package with extended (-E) temperature grade. The 'LF' prefix denotes the low-voltage / low-power (XLP) variant operating from 1.8V to 3.6V, while the on-chip peripherals combine Intelligent Analog integration with Core Independent Peripherals (CIPs) for mixed-signal applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile Flash memory, RAM, and a mix of analog/digital peripherals around a compact Von Neumann or Harvard bus. Within the broader taxonomy, the PIC16LF1716 sits inside Microchip's PIC16 mid-range family, which belongs to the 8-bit MCU category, itself a subclass of microcontrollers, embedded processors, and finally integrated circuits. The 'LF' sub-family emphasizes eXtreme Low Power (XLP) operation - active current in the microamp range and sleep currents down to tens of nanoamps - making it suitable for battery-powered end equipment. Key features include a 10-bit ADC with up to 17 channels, two operational amplifiers (on-chip Op Amps), 5-bit and 8-bit DACs, high-speed comparators, a 16-bit Numerically Controlled Oscillator (NCO), Complementary Output Generator (COG), Zero-Cross Detect (ZCD), Configurable Logic Cells (CLC), PWM/CCP, and Peripheral Pin Select (PPS). Communication interfaces comprise EUSART, I2C, and SPI. This rich analog-and-logic integration enables sensor conditioning, signal generation, and motor control from a single chip. Technically the device executes most instructions in a single clock cycle via the enhanced mid-range 16-bit instruction set, supports ICD (In-Circuit Debugger) and device programming through two pins, and offers configurable oscillator modes including a 32MHz internal HFINTOSC. The 28-UQFN package measures only 4x4 mm with an exposed thermal pad, ideal for space-constrained designs. Typical applications include LED lighting control, sensor signal conditioning, low-power IoT nodes, battery chargers, and small motor or fan control loops. The combination of on-chip Op Amps and CLCs allows closed-loop feedback to be implemented without external glue logic. When designing with this part, route the ICPGD/ICPSDAT debug signals to a dedicated header, follow Microchip's UQFN land-pattern recommendations for the thermal pad, and budget for an MPLAB X IDE / XC8 toolchain for firmware development. Validate worst-case active current at 32MHz against your battery life targets. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes not found in the manufacturer datasheet, giving engineers a single decision-ready reference for the PIC16LF1716-E/MV.

RFQ Liên hệ
PIC16LF1716-E/SO - 8-bit MCU, 14KB Flash, 32MHz, 28-SOIC | Microchip
PIC16LF1716-E/SO

PIC16LF1716-E/SO - 8-bit MCU, 14KB Flash, 32MHz, 28-SOIC | Microchip

The Microchip Technology PIC16LF1716-E/SO is an 8-bit Flash microcontroller from the PIC16F171x family that combines Intelligent Analog integration with extreme Low Power (XLP) technology. The device operates up to 32MHz, integrates 14KB (8K x 14) of Flash program memory and 1KB of RAM, and is housed in a 28-pin SOIC wide-body package (0.295 inch / 7.50 mm width). It runs across a 1.8V to 3.6V supply range suited to battery-powered designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, on-chip program memory (Flash/ROM), working RAM, and a fixed set of peripherals. MCUs sit at the bottom of the embedded computing hierarchy (transistor -> logic gate -> CPU core -> microcontroller -> embedded system -> IoT device). The PIC16 family uses a RISC-based Harvard architecture with a 14-bit instruction word optimized for deterministic, low-power control rather than raw throughput. Key features include a 10-bit Analog-to-Digital Converter (ADC), High-Speed Comparators, operational amplifiers (Op Amps), 5-bit and 8-bit Digital-to-Analog Converters (DACs), Capture/Compare/PWM (CCP) modules, Zero-Cross Detection (ZCD), Numerically Controlled Oscillator (NCO), Complementary Output Generator (COG), Configurable Logic Cells (CLC), Peripheral Pin Select (PPS), and an EUSART supporting I2C and SPI. This analog-rich integration removes the need for many external components in sensor-conditioning and motor-control circuits. Internally the device uses a pipelined RISC core with hardware multiplier, brown-out reset, low-voltage detection, and eXtreme Low Power (XLP) sleep modes that drop current consumption into the nanoampere range. Intelligent Analog peripherals are mapped through PPS to nearly every I/O pin, enabling flexible PCB routing without rewiring the silicon. Typical applications include low-power IoT sensor nodes, battery-powered instrumentation, LED lighting controllers, consumer white goods, and cost-sensitive general-purpose embedded control where mixed-signal integration matters. The wide 28-SOIC footprint simplifies hand prototyping and breadboard-friendly development compared with smaller QFN variants in the same family. When designing with this part, mind the 1.8V to 3.6V supply ceiling (the non-LF PIC16F1716 extends to 5.5V), and always de-couple VDD/AVDD with a 100nF ceramic capacitor placed within 5 mm of the package pin. PPS remapping must be configured before the peripheral is enabled, otherwise the first transaction will occur on the default pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the bare manufacturer datasheet.

RFQ Liên hệ
PIC16LF1716-E/SP - 8-Bit 32MHz 14KB Flash MCU | Microchip
PIC16LF1716-E/SP

PIC16LF1716-E/SP - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16LF1716-E/SP is an 8-bit PIC microcontroller from the PIC16F1713/16 family that combines Intelligent Analog integration with the eXtreme Low Power (XLP) feature set, housed in a 28-pin SPDIP (0.300 inch, 7.62 mm) through-hole package. It provides 14 KB (8K x 14 words) of Flash program memory, 1 KB of SRAM, and operates at up to 32 MHz across a 1.8 V to 3.6 V supply range, making it optimized for low-power and battery-friendly embedded designs. The integrated peripheral set includes operational amplifiers, a 10-bit ADC, 5-bit and 8-bit DACs, Capture/Compare/PWM (CCP) modules, Numerically Controlled Oscillator (NCO), Zero Cross Detect (ZCD), Complementary Output Generator (COG), Configurable Logic Cells (CLC), Peripheral Pin Select (PPS), and EUSART plus I2C/SPI interfaces. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM/EEPROM), and programmable peripherals into one package. The PIC16LF1716 belongs to the Microchip PIC16F product family, sitting within the 8-bit microcontroller category, which itself falls under the broader class of microcontrollers and embedded processors. Its 8-bit RISC architecture executes instructions in a single cycle (up to 32 MHz / 125 ns instruction time), offering deterministic performance for control loops. Key features include the XLP sleep current draw supporting battery lifetimes measured in years, an integrated Core Independent Peripherals (CIP) subsystem (CLC, COG, NCO, ZCD) that operates without CPU intervention to lower power and reduce code complexity, and the Peripheral Pin Select (PPS) that allows flexible routing of digital peripherals to available I/O pins. The high-resolution 10-bit ADC and on-chip op-amps enable sensor signal conditioning directly on the MCU. The PIC16LF1716 fuses a Harvard RISC core with rich analog peripherals in one die, supporting extreme low power (XLP) modes well below 1 uA in sleep. The PPS subsystem and CLC-based state machines let designers implement complex timing and logic tasks in hardware, freeing the core for application code. Typical applications include low-power sensor nodes and IoT end devices, consumer white goods and appliance control panels, battery-powered handheld instrumentation, LED lighting controllers with analog dimming, automotive interior accessories (where the -E temperature grade supports -40 C to +125 C), and industrial control boards requiring on-chip op-amps and DACs. The -E/SP variant is the extended-temperature, SPDIP-28 plastic DIP package version. When designing with this MCU, note that the SPDIP package is intended for prototyping and through-hole assembly; for high-volume surface-mount production, the -I/ML, -I/SO, or -I/MV QFN/SOIC variants of the same die are recommended. Always provide adequate decoupling (100 nF + bulk) close to VDD/VDDIO pins and follow Microchip's in-circuit serialization guidance for secure firmware deployment.

RFQ Liên hệ
PIC16LF1716-E/SS - 8-bit 32MHz XLP MCU 14KB Flash | Microchip
PIC16LF1716-E/SS

PIC16LF1716-E/SS - 8-bit 32MHz XLP MCU 14KB Flash | Microchip

The Microchip Technology PIC16LF1716-E/SS is an 8-bit PIC® XLP™ microcontroller featuring a 32 MHz CPU core, 14 KB (8K x 14) of Flash program memory and 1 KB of SRAM in a 28-pin SSOP package. As part of the PIC16 (L)F1713/6 family, this device combines Intelligent Analog integration with extreme low-power (XLP) technology for general-purpose applications. What is an 8-bit PIC microcontroller? An 8-bit MCU is a single-chip computer with an 8-bit data path that combines a CPU, RAM, Flash program memory, and on-chip peripherals such as ADC, timers, and communication interfaces. The PIC architecture sits in the broader taxonomy of embedded controllers (MCU -> microcontroller -> embedded processor -> semiconductor). Microchip's PIC16 line targets cost-sensitive, low-power applications where deterministic interrupt response and rich peripheral integration are valued. Key features of the PIC16LF1716 include on-chip op-amps, a high-speed comparator, a 10-bit ADC, 5-bit and 8-bit DACs, Capture/Compare/PWM (CCP) modules, Configurable Logic Cells (CLC), Numerically Controlled Oscillator (NCO), Complementary Output Generator (COG), Zero Cross Detect (ZCD), and Peripheral Pin Select (PPS). The device supports EUSART, I2C, and SPI communication interfaces. The architecture uses a modified Harvard RISC core with 49 instructions and a 16-level hardware stack, achieving single-cycle execution at 32 MHz (125 ns instruction cycle). The XLP technology delivers sub-microamp sleep currents, ideal for battery-powered applications. Typical applications include sensor signal conditioning with on-chip op-amps, LED driving with PWM and COG peripherals, low-power IoT sensor nodes, and consumer electronics. When designing with this MCU, verify the supply voltage range (1.8V to 3.6V for the LF variant) and ensure PPS is configured before assigning peripherals to physical pins. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design considerations not found in the manufacturer datasheet.

RFQ Liên hệ
PIC16LF1716-I/ML - 8-Bit XLP MCU, 14KB Flash, 28-QFN | Microchip
PIC16LF1716-I/ML

PIC16LF1716-I/ML - 8-Bit XLP MCU, 14KB Flash, 28-QFN | Microchip

The Microchip Technology PIC16LF1716-I/ML is an 8-bit RISC microcontroller from the PIC16 (L)F1713/6 family that combines Intelligent Analog integration with extreme low power (XLP) technology. It integrates 14KB (8K x 14) of Flash program memory, runs at up to 32 MHz internal clock, and is housed in a 28-pin QFN (6x6 mm) package with industrial temperature grade (-40C to +85C). According to the DigiKey listing, the device ships in 28-QFN (6x6) form factor with the /ML suffix designating the matte-tin QFN package. An 8-bit PIC microcontroller (MCU) is a low-cost, low-power RISC processor built on a Harvard architecture with separate program and data buses. PIC MCUs occupy the entry-level and mid-range node in the embedded controller taxonomy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The PIC16F/LF1716 family sits at the upper end of Microchip's mid-range XLP line, adding on-chip op-amps, 12-bit ADC with computation, 10-bit DAC, Core Independent Peripherals (CLC, COG, NCO, ZCD), and eXtreme Low Power sleep currents below 60 nA typical. Key features of the PIC16LF1716 include 14KB self-programmable Flash, 1KB RAM, 256 bytes EEPROM, 17-channel 12-bit ADC, two 10-bit DACs, two operational amplifiers, two comparators, four 16-bit timers, one EUSART, two MSSP (I2C/SPI), CLC, COG, NCO, Zero-Cross Detect, and an Integrated Temperature Indicator. The 'LF' prefix denotes the 1.8V-3.6V wide-voltage variant versus the standard 'F' part rated 2.3V-5.5V, making the LF ideal for battery-powered designs that must operate from a depleted Li-coin cell down to 1.8V. The architecture uses a 14-bit instruction word and 8-bit data path, with a hardware stack and 32-level deep interrupt nesting. The 32 MHz internal oscillator eliminates an external crystal in cost-sensitive designs, while the nanoWatt XLP sleep modes and peripheral module disable logic let active current drop below 30 uA/MHz and sleep current below 60 nA. Intelligent Analog peripherals (op-amps, 12-bit ADC, 10-bit DAC, comparators) are routed through the Peripheral Pin Select (PPS) system for flexible signal conditioning. Typical applications include IoT sensor nodes, battery-powered thermostats, low-cost sensor conditioning, LED lighting controllers, e-metering, white goods interfaces, wearables, and remote controls. The integrated op-amps and 12-bit ADC make it well suited for direct interfacing with analog sensors (thermistors, photodiodes, strain gauges) without external signal chain components. When designing with this device, note that the 28-QFN package has an exposed thermal pad that must be soldered to the PCB ground plane for proper electrical and thermal performance. The PPS peripheral mapping allows remapping of digital peripherals to most I/O pins, simplifying PCB layout. Program development uses Microchip's free MPLAB X IDE with XC8 compiler and the MPLAB Code Configurator for peripheral initialization. This page synthesizes distributor pricing, drop-in alternative MPNs, design notes, and a comparison with the LF variant family not consolidated on any single manufacturer or distributor page.

RFQ Liên hệ
PIC16LF1716-I/MV - 8-bit XLP MCU, 14KB Flash, 28-UQFN | Microchip
PIC16LF1716-I/MV

PIC16LF1716-I/MV - 8-bit XLP MCU, 14KB Flash, 28-UQFN | Microchip

The Microchip Technology PIC16LF1716-I/MV is an 8-bit PIC microcontroller in the PIC XLP 16F family, featuring 14 KB (8K x 14 words) of Flash program memory, 1 KB of RAM, and a 32 MHz internal oscillator, housed in a 28-pin UQFN exposed-pad package (4 mm x 4 mm). It integrates 17 channels of 10-bit ADC, a 5-bit and an 8-bit DAC, operational amplifiers, high-speed comparators, and core-independent peripherals such as CLC, COG, NCO, and Zero-Cross Detect for flexible signal-chain conditioning. A microcontroller (MCU) is a single-chip processor that combines a CPU, program and data memory, and configurable peripherals on one die, executing firmware instructions in real time. MCUs sit at the bottom of the embedded-processing hierarchy and are differentiated from microprocessors by their integrated peripherals and lower-power sleep modes. Within Microchip's portfolio, PIC16F/LF parts balance 8-bit simplicity with on-chip analog, while PIC18 adds more memory, and dsPIC/PIC32 families move to 16-bit and 32-bit cores respectively. The LF prefix designates the wide-voltage, low-power XLP variant aimed at battery and energy-harvesting applications. Key features of the PIC16LF1716-I/MV include eXtreme Low Power (XLP) technology with deep sleep currents in the nanoampere range, peripheral pin select (PPS) for flexible signal routing, and up to 25 mA per I/O source/sink capable of directly driving LEDs. The 32 MHz maximum clock delivers 8 MIPS throughput, while 256 bytes of EEPROM and 1024 bytes of RAM support small data buffers with byte-level endurance. Typical applications span sensor signal conditioning with on-chip op-amps, low-power battery-powered IoT nodes, LED driving with PWM, brushless-DC commutation using COG, and industrial control loops using comparators and ADC feedback. The QFN-28 footprint simplifies layout on densely populated mixed-signal boards. Designers should note that VDD must be decoupled with a 100 nF ceramic capacitor within 1-2 mm of the package pin and that the exposed thermal pad must be soldered to a copper pour for proper heat dissipation. Programming is via ICSP on PGC/PGD pins shared with RB6/RB7, requiring isolation resistors if these pins are used in the application.

RFQ Liên hệ
PIC16LF1716-I/SO - 8-Bit 32MHz MCU, 14KB Flash, 28-SOIC | Microchip
PIC16LF1716-I/SO

PIC16LF1716-I/SO - 8-Bit 32MHz MCU, 14KB Flash, 28-SOIC | Microchip

The Microchip Technology PIC16LF1716-I/SO is an 8-bit RISC microcontroller from the PIC® XLP™ 16F family, integrating 14KB (8K x 14 words) of Flash program memory and 1KB of SRAM in a 28-pin wide-body SOIC package. It executes instructions at up to 32 MHz with a 16 MHz internal oscillator option, and the LF prefix denotes the low-voltage variant that operates across a wide 1.8V to 3.6V supply range suited to battery-powered designs. The device belongs to the PIC16F170x/171x family, which combines Intelligent Analog peripherals with eXtreme Low Power (XLP) technology for cost-sensitive general-purpose applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and peripheral interfaces such as ADC, timers, and communication controllers. The PIC16 family is a mid-range 8-bit RISC architecture from Microchip with a 14-bit instruction word, well known for deterministic interrupt response, low power consumption, and a mature MPLAB X toolchain. Within the broader taxonomy, the PIC16LF1716 sits between baseline PIC10/PIC12 parts and enhanced mid-range PIC18 devices, targeting applications that need analog integration and moderate code density. Key features of the PIC16LF1716 include up to two operational amplifiers, up to two high-speed comparators, up to 28 input channels of 10-bit ADC with computation (ADC2), up to one 5-bit/8-bit DAC, a Configurable Logic Cell (CLC) for custom combinational and sequential logic, Complementary Output Generator (COG), Numerically Controlled Oscillator (NCO), Zero Cross Detect, and Peripheral Pin Select (PPS) for flexible signal routing. These Core Independent Peripherals offload tasks from the CPU, enabling deterministic real-time behavior without software intervention. Typical applications include sensor signal conditioning with on-chip op amps, battery-powered IoT sensor nodes leveraging XLP sleep modes, LED lighting control with COG-driven complementary outputs, low-cost consumer appliances, and industrial control loops that benefit from integrated analog and digital peripherals in a single 28-SOIC package. When designing with the PIC16LF1716, verify the LF 1.8V-3.6V supply constraint versus the standard PIC16F1716 (1.8V-5.5V) and select the variant that matches your power-rail architecture. PPS allows remapping of digital peripherals to most I/O pins, simplifying PCB routing but requiring careful configuration to avoid conflicts at runtime.

RFQ Liên hệ
PIC16LF1716-I/SP - 8-bit XLP MCU 14KB Flash 28-SPDIP | Microchip
PIC16LF1716-I/SP

PIC16LF1716-I/SP - 8-bit XLP MCU 14KB Flash 28-SPDIP | Microchip

The Microchip Technology PIC16LF1716-I/SP is an 8-bit PIC microcontroller from the PIC16F1716 XLP family, delivering 32 MHz CPU performance with 14 KB (8K x 14 words) of Flash program memory and 1024 bytes of SRAM in a 28-pin SPDIP (SP) through-hole package. It integrates 10-bit ADC, on-chip operational amplifiers, 5/8-bit DAC, and Core Independent Peripherals (CIPs) including Configurable Logic Cells (CLC), Complementary Output Generator (COG), Numerically Controlled Oscillator (NCO) and Zero Cross Detect (ZCD), along with Peripheral Pin Select (PPS), EUSART, I2C and SPI. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, volatile data memory, and integrated peripherals. The 8-bit PIC16 family sits at the low-power, low-cost end of Microchip's portfolio and is widely used in general-purpose embedded control. The PIC16LF1716 belongs to the LF "low-voltage / low-power" sub-family, supporting operation down to 1.8 V and featuring eXtreme Low Power (XLP) technology that enables sleep currents in the nanoampere range for battery-friendly designs. Key features include 14 KB self-programmable Flash, 1 KB SRAM, 10-bit ADC with automated channels, two operational amplifiers suitable for signal conditioning, a 5-bit and 8-bit DAC for setpoint generation, and four Configurable Logic Cells that allow hardware glue logic to be implemented without discrete gates. The PWM, CCP and CWG peripherals support motor and lighting control, while PPS allows digital peripheral pins to be remapped to multiple physical I/O pins. Typical applications include consumer and IoT battery-powered sensor nodes, intelligent thermostats and HVAC controllers, LED lighting drivers, small appliance control boards, and low-cost analog front-end conditioning where the on-chip op-amps eliminate external amplifiers. When designing with this device, ensure the ICSP clock and data pins are accessible for in-circuit programming. Add a 100 nF decoupling capacitor close to VDD, keep analog and digital grounds joined at a single point, and use PPS to route peripherals away from noisy traces.

RFQ Liên hệ