Vi điều khiển

Sản phẩm (20.000+)

PIC24F32KA302T-I/SS - 32MHz XLP MCU | Microchip
PIC24F32KA302T-I/SS

PIC24F32KA302T-I/SS - 32MHz XLP MCU | Microchip

The Microchip Technology PIC24F32KA302T-I/SS is a 16-bit PIC XLP microcontroller with a 32 MHz operating frequency, 16 MIPS performance, 32 KB of Flash memory, 2 KB of RAM, and 512 bytes of EEPROM in a 28-pin SSOP package. It is designed for compact, battery-powered equipment in which low-power operation, mixed-signal measurement, and an integrated real-time clock are important. A PIC XLP microcontroller is a 16-bit RISC-based embedded controller optimized for energy efficiency rather than maximum compute throughput. The PIC24F32KA302 family combines conventional microcontroller functions with low-power peripherals such as DSBOR, DSWDT, and an RTCC that can continue operating in Deep Sleep mode. This places it within the broader hierarchy of embedded controller, microcontroller, semiconductor, and power-conscious IoT control systems. Key features include 16 MIPS execution, a 12-bit ADC, and CTMU support for capacitive measurement. The 32 KB Flash program memory provides 11K x 24 words for application firmware, while 2 KB of SRAM supports working data and the 512-byte EEPROM preserves parameters without using Flash wear. The industrial-temperature option supports operation from -40°C to +85°C, while the 28-SSOP package keeps the footprint compatible with conventional surface-mount assembly. The device combines a high-performance 16-bit core with peripherals designed to reduce external component count. CTMU can support touch sensing and other capacitive measurement circuits, the ADC handles analog inputs, and DSBOR, DSWDT, and RTCC support low-power system behavior. The manufacturer describes the family as featuring eXtreme Low Power consumption for applications constrained by battery energy or available thermal budget. Typical uses include battery-operated sensors, compact industrial monitors, capacitive-control panels, wearable accessories, and low-power IoT nodes. In a sensor terminal, the MCU can sample an analog input, manage a capacitive interface, maintain timing through the RTCC, and enter Deep Sleep between measurement events. Its 16-bit architecture and 16 MIPS performance provide a practical balance between responsive control and reduced switching activity. Design attention should focus on decoupling, ADC grounding, clock configuration, and low-power sequencing. Place the required input and output capacitors close to the appropriate supply pins, route analog and digital return currents carefully, and verify the external crystal or oscillator network against the electrical characteristics in the manufacturer datasheet. Budget wake-up and acquisition time whenever the firmware relies on periodic Deep Sleep operation. This page organizes the PIC24F32KA302T-I/SS specifications, qualified same-package alternatives, application guidance, and design notes into an engineering-focused selection reference. It also identifies the functional differences among closely related 28-pin SSOP orderable variants to help designers distinguish temperature grades, packaging codes, and reel-format choices before approving a replacement.

RFQ Liên hệ
PIC24F32KA304-E/ML - 16-bit XLP MCU 32KB Flash 44-QFN | Microchip
PIC24F32KA304-E/ML

PIC24F32KA304-E/ML - 16-bit XLP MCU 32KB Flash 44-QFN | Microchip

The Microchip PIC24F32KA304-E/ML is a 16-bit microcontroller from the PIC24F XLP family featuring eXtreme Low Power consumption, 32 KB of Flash program memory, 2 KB of RAM, and 512 bytes of EEPROM, housed in a 44-pin QFN (8x8 mm) package. It operates at up to 32 MHz delivering 16 MIPS, with a 12-bit ADC and on-chip Charge Time Measurement Unit (CTMU) for capacitive touch and precise timing. A 16-bit microcontroller is a microprocessor core with a 16-bit data path, 16-bit registers, and a 16-bit instruction word architecture optimized for embedded control. Within the broader taxonomy, the PIC24F belongs to the 8/16-bit MCU category -> general-purpose microcontroller -> embedded controller -> semiconductor IC. Its 16-bit architecture sits between 8-bit MCUs (8051, AVR, PIC18) and 32-bit ARM Cortex-M cores, offering a balance of computational throughput, deterministic interrupt response, and code density for power-constrained embedded systems. Key features of this part include the nanoWatt XLP technology that enables Deep Sleep currents in the nanoampere range, peripherals such as DSBOR, DSWDT, and RTCC that keep running in Deep Sleep, and the integrated CTMU for touch sensing and precise time measurement. The 12-bit ADC supports up to 16 channels on the 44-pin device, providing accurate sensor measurements for instrumentation and battery monitoring applications. The architecture uses a modified Harvard structure with separate program and data buses, a hardware multiplier, and a barrel shifter, allowing single-cycle MAC operations. The "-E" suffix denotes the Extended (-40C to +125C) operating temperature grade, while the "/ML" suffix designates the 44-pin QFN package with an exposed thermal pad suitable for reflow soldering on standard SMT lines. Typical applications include IoT sensor nodes, battery-powered wearables, energy harvesting systems, industrial sensor interfaces, and consumer electronics requiring low standby current. The wide operating voltage range and ultra-low-power Deep Sleep modes make the part particularly suitable for products that must run for years on a single coin cell or AA battery. When designing with this part, ensure the exposed pad of the QFN package is soldered to the PCB ground plane for both thermal dissipation and electrical grounding. The device supports programming via ICSP (In-Circuit Serial Programming) and JTAG, allowing firmware updates without removing the MCU from the board. This page synthesizes distributor pricing, package-pinned drop-in alternatives within the PIC24F KA family, and practical low-power design notes not consolidated in the manufacturer datasheet.

RFQ Liên hệ
PIC24F32KA304-E/MV - 16-Bit 32MHz XLP Microcontroller | Microchip
PIC24F32KA304-E/MV

PIC24F32KA304-E/MV - 16-Bit 32MHz XLP Microcontroller | Microchip

The Microchip Technology PIC24F32KA304-E/MV is a 16-bit flash microcontroller designed for power-constrained and battery-powered systems. It operates at up to 32 MHz, provides 32 KB of program Flash memory organized as 11K × 24 words, and is packaged in a 48-pin UQFN measuring 6 × 6 mm. The MCU belongs to the PIC24F32KA304 family and combines XLP low-power design with peripherals that can operate during Deep Sleep mode. A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, data memory, timers, communication interfaces, and analog or control peripherals on one device. The PIC24 architecture extends Microchip's RISC portfolio with a 16-bit instruction set and peripheral-rich platform. In an embedded system, the controller executes firmware, reads sensors, evaluates control conditions, drives displays or actuators, and coordinates power-management functions. The PIC24F32KA304-E/MV emphasizes low-power operation through XLP technology. Its notable power-related peripherals include DSBOR, DSWDT, and RTCC, which can run in Deep Sleep mode according to the manufacturer product description. This feature set is particularly useful when average standby power matters more than continuous processing performance. The exact current consumption figures shall be selected from the PIC24F32KA304 family data sheet for the relevant operating mode and voltage. Program memory capacity is 32 KB, or 11K × 24 words, while the family listing identifies 2 KB of RAM, 512 bytes of EEPROM, and 12-bit ADC capability. The processor reaches 32 MHz and delivers up to 16 MIPS. CTMU support adds a charge-timing measurement peripheral for capacitive sensing and related measurement tasks. These resources allow one device to handle control logic, analog measurement, communications, and low-power supervision. Typical applications include battery-powered health monitors, blood-pressure equipment, portable industrial instruments, connected sensors, compact control panels, and low-power embedded products. The 48-UQFN package supports space-constrained designs while exposing a broad peripheral set. The MCU architecture can also support growth from simpler designs into more demanding products by retaining compatibility with related PIC24F and dsPIC33 pin arrangements where the selected device and package permit. Design the PCB with short analog and digital return paths, verify decoupling near the power pins, and assign any externally exposed pins according to the 48-UQFN pin-description table. When Deep Sleep is used, test wake-up behavior with real peripherals attached because the DSWDT, RTCC, DSBOR, and other sleep-capable blocks can affect timing and system state. This product record combines the exact family specifications with practical guidance on low-power firmware, PCB implementation, analog measurement, and drop-in family alternatives. It highlights where the 32 MHz performance, 32 KB Flash memory, XLP feature set, and 6 × 6 mm UQFN footprint simplify design decisions across compact, battery-operated products.

RFQ Liên hệ
PIC24F32KA304-E/PT - 32MHz Low-Power 16-Bit MCU | Microchip
PIC24F32KA304-E/PT

PIC24F32KA304-E/PT - 32MHz Low-Power 16-Bit MCU | Microchip

The Microchip Technology PIC24F32KA304-E/PT is an extreme-low-power 16-bit PIC microcontroller operating at up to 32 MHz, with 32 KB of Flash program memory, 2 KB of data RAM, and 512 bytes of data EEPROM in a 44-pin TQFP package measuring 10 mm by 10 mm. It provides 16 MIPS performance and combines a 12-bit ADC, CTMU, three comparators, three PWM channels, seven timers, and an RTCC in a power-conscious design. A PIC24-series microcontroller is a compact embedded-processing device built around a 16-bit RISC core, program Flash, data RAM, EEPROM, timers, serial interfaces, and mixed-signal peripherals. It belongs to the broader microcontroller hierarchy: MCU -> embedded controller -> programmable semiconductor. The PIC24F32KA304 family is positioned for battery-powered and power-constrained products where responsive computation must coexist with low standby energy. The PIC24F32KA304-E/PT combines eXtreme Low Power features with integrated DSBOR, DSWDT, and an RTCC that can operate in Deep Sleep mode. These resources support systems that must monitor time, maintain state, and periodically wake to service sensors without continuously running the CPU. Its 32 KB Flash capacity provides 11K by 24 words, while 2 KB of RAM and 512 bytes of EEPROM support working data and retained configuration. The mixed-signal resources make the device suitable for direct sensor acquisition and control. The 12-bit ADC has 16 channels, while CTMU can support capacitive-touch and analog measurement functions. Three comparators, three PWM outputs, and seven timers enable motor, lighting, alarm, and periodic-control functions. A 32 MHz clock and 16 MIPS execution capability allow the core to service multiple real-time tasks without requiring a larger processor class. Typical applications include portable environmental monitors, industrial sensing nodes, battery-powered instrumentation, medical-device accessories, connected equipment, and compact control panels. The -E/PT ordering option identifies the specified Microchip device in a 44-pin TQFP package, while the family’s low-power peripherals help reduce the duty cycle of designs that spend substantial time asleep. Designers should size decoupling capacitors, preserve the required oscillator and reset connections, and verify every analog channel against the datasheet pinout and analog-channel availability. Production firmware should use the watchdog and brown-out resources conservatively, and low-power design should account for wake sources, timer intervals, and the energy consumed during each active measurement cycle. This page combines verified manufacturer and distributor information, practical low-power design guidance, an exact availability-based pricing reference, and transparent drop-in comparison options. It also distinguishes directly related family members from options that require firmware, memory-capacity, or temperature-range review before substitution.

RFQ Liên hệ
PIC24F32KA304-I/ML - 32KB Flash XLP 16-bit MCU | Microchip
PIC24F32KA304-I/ML

PIC24F32KA304-I/ML - 32KB Flash XLP 16-bit MCU | Microchip

The Microchip PIC24F32KA304-I/ML is a 16-bit microcontroller from the PIC24F XLP family, featuring 32 KB of Flash program memory (11K x 24 words), 2 KB of RAM, and a 32 MHz maximum CPU speed in a 44-pin QFN (8x8 mm) package. It is designed for ultra-low-power (XLP) operation with deep-sleep peripherals such as DSBOR, DSWDT, and RTCC, making it suitable for battery-powered and energy-harvesting designs. A 16-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on a single silicon die. The PIC24F family sits in the hierarchy: MCU -> 16-bit MCU -> PIC24F family -> microcontroller -> embedded processor -> semiconductor. The 16-bit architecture provides enhanced computational performance and C-compiler efficiency over 8-bit PIC MCUs, while the XLP (eXtreme Low Power) technology extends battery life in power-constrained applications through nanoWatt features. Key features include a 32 MHz internal oscillator, 17 general-purpose I/O pins, multiple communication peripherals (UART, SPI, I2C), a 12-bit ADC with 200 ksps conversion rate, and multiple 16-bit timers. The device operates from 1.8V to 3.6V supply voltage, with a maximum operating temperature range of -40C to +85C in the industrial grade (-I suffix). The 44-QFN package provides a compact footprint with exposed thermal pad. Technically, the PIC24F32KA304 uses a modified Harvard architecture with separate program and data buses, enabling simultaneous instruction fetch and data access. The integrated nanoWatt XLP technology achieves deep-sleep currents below 20 nA with RTCC running, while the peripheral pin select (PPS) feature allows flexible remapping of digital peripherals to I/O pins. Typical applications include battery-powered IoT sensor nodes, wearable health monitors, remote controls, low-power wireless sensor networks, energy harvesting devices, and consumer electronics requiring extended battery life. The combination of high computational performance, multiple communication interfaces, and ultra-low-power modes makes this MCU particularly suitable for edge computing and connected IoT endpoints. When designing with this device, ensure decoupling capacitors (100 nF + 10 uF) are placed close to the VDD pins, and that unused I/O pins are configured as outputs to minimize current consumption. The PPS feature requires careful configuration in MPLAB X IDE to avoid peripheral conflicts. This page synthesizes distributor pricing from DigiKey, drop-in alternatives from Microchip's PIC24F family, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ
PIC24F32KA304-I/MV - 16-Bit 32MHz XLP Microcontroller | Microchip
PIC24F32KA304-I/MV

PIC24F32KA304-I/MV - 16-Bit 32MHz XLP Microcontroller | Microchip

The Microchip Technology PIC24F32KA304-I/MV is a 16-bit PIC XLP microcontroller with a 32 MHz operating frequency, 32 KB of program Flash, 2 KB of RAM, and 512 bytes of EEPROM in a 48-pin UQFN (6 x 6 mm) package. It combines 16 MIPS instruction throughput with a 12-bit ADC and CTMU peripheral for compact, power-conscious embedded designs. A microcontroller is the central processing element of an embedded control system, combining a processor core, program memory, data memory, timers, communication peripherals, and analog interfaces on one integrated circuit. The PIC24F device family provides a migration path from 8-bit embedded platforms to a 16-bit architecture without requiring an entirely different software or hardware design methodology. PIC24F devices are also compatible with selected dsPIC33 pin arrangements, according to the manufacturer data sheet. The PIC24F32KA304-I/MV provides 32 KB of Flash memory organized as 11K x 24 words, along with 2 KB of data RAM and 512 bytes of EEPROM for nonvolatile parameter storage. Its 17 I/O pins provide access to digital inputs and outputs alongside the integrated 12-bit ADC and capacitive measurement unit. The 32 MHz maximum clock supports real-time control, sampling, communications, and user-interface updates without relying on an external processor. The XLP architecture is central to this part's positioning. The manufacturer identifies DSBOR, DSWDT, and RTCC as peripherals that can continue operating during Deep Sleep, supporting low-power measurement and control in battery-powered equipment. DSBOR retains brown-out monitoring, DSWDT provides watchdog supervision, and the real-time clock and calendar allows low-duty-cycle timing functions to continue when the core sleeps. Typical uses include compact battery-powered environmental monitors, portable industrial data loggers, connected sensing nodes, low-power control panels, and embedded systems that periodically wake to acquire data. The 48-pin UQFN package also allows a small PCB footprint, although its exposed-pad construction requires careful thermal and assembly planning. Designers should budget decoupling close to the supply pins, validate the exposed-pad solder and thermal arrangement, and use the manufacturer's XLP configuration guidance to control wake-up behavior. The verified part listing identifies the device as available for immediate shipment from DigiKey, while inventory and lifecycle conditions should always be reconfirmed at the point of procurement. This product page combines verified distributor specifications, package and pricing data, application guidance, and design notes that help engineers evaluate the PIC24F32KA304-I/MV beyond a distributor listing alone.

RFQ Liên hệ
PIC24F32KA304-I/PT - 32KB Flash 16-bit XLP MCU | Microchip
PIC24F32KA304-I/PT

PIC24F32KA304-I/PT - 32KB Flash 16-bit XLP MCU | Microchip

The Microchip Technology PIC24F32KA304-I/PT is a 16-bit microcontroller from the PIC® XLP™ 24F family featuring eXtreme Low Power (XLP) technology, 32KB of Flash program memory, 2KB of RAM, and 512 bytes of EEPROM, all housed in a 44-pin TQFP (10x10 mm) package. It operates at up to 32 MHz delivering 16 MIPS performance from a 1.8V to 3.6V supply, making it ideal for battery-powered and energy-constrained applications. What is a 16-bit microcontroller? A 16-bit MCU is a single-chip computer with a 16-bit data path that offers a balance between 8-bit and 32-bit devices — more computational throughput than 8-bit MCUs at lower cost and power than 32-bit Cortex-M parts. The PIC24F family targets general-purpose embedded control with rich peripherals and ultra-low power operation, sitting in the hierarchy as: 16-bit MCU → PIC24F sub-family → XLP power-optimized series → power management and sensor interface applications. Key features include a 12-bit ADC with up to 16 channels, a Charge Time Measurement Unit (CTMU) for capacitive touch sensing and precise time measurement, multiple timers, a Real-Time Clock and Calendar (RTCC) that operates in Deep Sleep, and dual watchdogs (DSWDT and WDT) plus a Deep Sleep Brown-Out Reset (DSBOR). The 17 GPIOs support peripherals including UART, SPI, I2C, and PPS (Peripheral Pin Select). The PIC24F32KA304 uses Microchip's modified Harvard architecture with a 16-bit wide instruction set and 24-bit wide instruction word, enabling compact C code and efficient pointer math. XLP technology reduces sleep current to nanoampere levels, with peripherals like RTCC operating from a dedicated low-power domain while the core is powered down. Typical applications include IoT sensor nodes, battery-powered medical devices (glucose meters, portable monitors), wearable fitness trackers, remote controls, energy harvesting systems, and low-power wireless sensor networks. The wide 1.8–3.6V supply range supports direct Li-ion and 2xAA battery operation. When designing with this MCU, allocate careful attention to the Deep Sleep mode configuration and PPS pin mapping. Designers should evaluate the wake-up sources (RTCC, external interrupt, WDT) against the application's latency requirements, since XLP Deep Sleep current is the dominant factor for battery life calculations. This page synthesizes distributor pricing, drop-in compatible alternatives from the PIC24F family, and practical design notes for low-power embedded systems, providing context not found in the standalone manufacturer datasheet.

RFQ Liên hệ
PIC24F32KA304T-I/MV - 16-bit XLP MCU 32KB Flash 48-UQFN | Microchip
PIC24F32KA304T-I/MV

PIC24F32KA304T-I/MV - 16-bit XLP MCU 32KB Flash 48-UQFN | Microchip

The Microchip Technology PIC24F32KA304T-I/MV is a 16-bit PIC24F microcontroller featuring eXtreme Low Power (XLP) technology, 32KB of Flash program memory, 2KB of RAM, and 512 bytes of EEPROM, operating at up to 32MHz (16 MIPS) in a 48-pin UQFN (6x6) package. The 'T' suffix denotes tape-and-reel packaging, while 'I' indicates the industrial temperature grade of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, programmable peripherals, and I/O pins. The PIC24F belongs to Microchip's 16-bit MCU family that bridges 8-bit PIC and 32-bit PIC32 architectures, offering higher computational throughput than 8-bit cores while maintaining low power consumption. Within Microchip's taxonomy, PIC24F sits in the PIC24F sub-family, which itself belongs to the dsPIC33/PIC24 family. MCUs are fundamental building blocks of embedded systems across consumer, industrial, and IoT markets. Key features include 12-bit ADC with up to 30 analog channels, multiple communication peripherals (UART, SPI, I2C), 5 16-bit timers, RTCC, and CTMU peripheral. The device features unique deep-sleep peripherals such as DSBOR, DSWDT, and RTCC that operate even in Deep Sleep mode, enabling industry-leading low-power performance for battery-powered applications. The integrated nanoWatt XLP technology achieves sleep currents in the nanoamp range. The PIC24F32KA304 is built on a Harvard-architecture modified-RISC core with a 16-bit data path, providing 16 MIPS throughput at 32MHz while operating from 1.8V to 3.6V. The device includes a hardware multiplier and divider, 16x16-bit working registers, and a vectored interrupt controller with 5 priority levels. Programmable peripherals are configurable through PPS (Peripheral Pin Select), allowing flexible pin assignments. Typical applications include battery-powered IoT sensors, portable medical devices, wearable fitness/health trackers, industrial sensor nodes, remote controls, smart meters, and ultra-low-power wireless sensor networks. The 32KB flash supports connectivity stacks and application firmware for these resource-constrained scenarios. When designing with this device, prioritize power-conscious firmware design using the XLP sleep modes, since peripheral activity during sleep often dominates total system power. Leverage the integrated CTMU for capacitive touch sensing without external components, and use the DSBOR/DSWDT for guaranteed brown-out and watchdog supervision while in deep sleep. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Liên hệ
PIC24FJ1024GA606-E/MR - 16-bit 32MHz 1MB Flash MCU | Microchip
PIC24FJ1024GA606-E/MR

PIC24FJ1024GA606-E/MR - 16-bit 32MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC24FJ1024GA606-E/MR is a 16-bit RISC microcontroller featuring a PIC24 CPU core operating at up to 32 MHz (16 MIPS), integrating 1 MB of dual-partition Flash program memory with Error Correction Code (ECC) and 32 KB of data RAM, housed in a 64-pin 9 mm x 9 mm QFN (MR) package with an exposed thermal pad. It is part of the eXtreme Low Power PIC24F MCU family, offering a rich peripheral set including 6 UART, 3 SPI, 3 I2C, 2 IrDA, 6 PWM channels, 5 timers, 3 comparators, 8 DMA channels, and 16 analog channels supporting 10/12-bit ADC. A PIC microcontroller (MCU) is a compact, low-cost, programmable processor that integrates a CPU, non-volatile program storage, working RAM, and configurable peripherals onto a single silicon die. The PIC24F family from Microchip extends the 8-bit PIC16/PIC18 architecture into a 16-bit modified-Harvard core, enabling more computational throughput (measured in MIPS) and richer peripherals while preserving the deterministic interrupt model and low-power sleep modes that made the platform popular. PIC MCUs are widely used in industrial sensing, motor control, and consumer devices where ease of development, long product lifecycles, and stable supply matter more than peak raw performance. Key features include dual-bank Flash with live update capability, on-chip ECC for higher reliability, deep sleep currents in the microamp range, and an integrated USB 2.0 full-speed OTG controller. The 16 analog channels are suitable for multi-sensor acquisition boards, while the DMA-driven peripheral set reduces CPU load in data-pump applications. The wide 3.0 V-3.6 V supply range simplifies battery-powered designs and 3.3 V point-of-load architectures. Architecturally, the PIC24FJ1024GA606 uses a 16-bit modified-Harvard core with hardware multiply/divide, a multi-vector interrupt controller, and Microchip's PMM power management unit. The dual-partition Flash supports live update (running one bank while erasing/writing the other), enabling firmware-in-the-field upgrades without service interruption. Peripherals are routed through Microchip's PPS (Peripheral Pin Select) system, allowing flexible assignment of digital functions to most I/O pins. Typical applications include industrial control and HMI panels, low-power IoT sensor nodes, automotive body and accessory ECUs, USB peripherals and embedded host devices, and portable medical instrumentation. For IoT designs, the combination of deep-sleep modes and live-update Flash is especially valuable - nodes can sleep for years on a single battery cell yet receive secure OTA firmware updates in the field. For industrial HMI panels, the 16 analog inputs and graphics-ready PWM timers are well-suited to touch + TFT implementations. When designing with this MCU, pay attention to the PLL configuration sequence and the Vbat/Vddcore/Vddio decoupling layout, since high-speed ADC sampling noise can couple from digital rails. The dual-partition Flash and Live Update flow should be exercised during prototyping; failed live updates can brick the device if the bootloader is not robust. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not collected in a single place in the manufacturer datasheet.

USD $7,36 Còn hàng
PIC24FJ1024GA606-E/PT - 16-Bit MCU 1MB Flash 32KB RAM 64-TQFP | Microchip
PIC24FJ1024GA606-E/PT

PIC24FJ1024GA606-E/PT - 16-Bit MCU 1MB Flash 32KB RAM 64-TQFP | Microchip

The Microchip Technology PIC24FJ1024GA606-E/PT is a 16-bit RISC microcontroller featuring a PIC24 CPU core operating at up to 32 MHz, with 1 MB of dual-partition Flash program memory (with ECC) and 32 KB of RAM, housed in a 64-pin TQFP (10x10 mm) package. It belongs to the PIC24F family, which is positioned as an eXtreme Low Power MCU platform for embedded designs requiring large memory and rich connectivity. A PIC24 microcontroller is a 16-bit modified-Harvard architecture MCU built around the PIC instruction set, which sits between 8-bit PIC16/PIC18 parts and the 32-bit PIC32MX/PIC32MZ devices. It belongs to the broader category of microcontrollers (MCUs) within the embedded integrated circuit hierarchy: MCU -> microcontroller IC -> embedded processor -> semiconductor. The PIC24F sub-family is engineered for low-power, mixed-signal applications where USB, graphics, and connectivity peripherals are commonly required. Key features of the PIC24FJ1024GA606 include 1 MB Flash (341.5K words x 24 bits) with Error Correction Code, dual-partition memory for Live Update firmware swapping, 32 KB SRAM, 53 general-purpose I/O pins, 12-bit ADC, multiple communication peripherals, and 9 timers with 6 PWM channels and 8 DMA channels. The device is supplied in a -40C to +125C extended temperature grade, suitable for industrial and harsh-environment deployments. Architecturally, the PIC24FJ1024GA606 integrates a wide peripheral set including 3 I2C, 3 SPI, and 6 UART modules, plus dedicated USB and real-time clock peripherals. Live Update dual-partition Flash enables in-field firmware upgrades without downtime, and ECC on Flash ensures reliable operation in safety-conscious applications. The 64-TQFP package (10x10 mm) provides ample I/O count for parallel-bus or display interfaces. Typical applications include industrial control panels, low-power IoT sensor hubs, USB human-interface devices, home appliance control boards, and battery-powered instrumentation where the large 1 MB Flash supports complex protocol stacks (TLS, USB stacks, graphics libraries). When designing with this part, evaluate the actual active-mode current at 32 MHz and the deep-sleep current to size battery budgets. Pin 1 indicator and TQFP-64 footprint are standard, enabling compatibility with existing PIC24FJ Explorer 16 development ecosystems. This page synthesizes distributor pricing, drop-in alternatives within the PIC24FJ family, and practical design notes not found in the manufacturer datasheet.

RFQ Liên hệ
PIC24FJ1024GA606-I/MR - 16-Bit MCU, 1MB Flash, 32KB RAM | Microchip
PIC24FJ1024GA606-I/MR

PIC24FJ1024GA606-I/MR - 16-Bit MCU, 1MB Flash, 32KB RAM | Microchip

The Microchip Technology PIC24FJ1024GA606-I/MR is a 16-bit RISC microcontroller from the PIC24F eXtreme Low Power family, featuring 1MB (341.5K x 24) of dual-partition Flash with ECC and 32KB of SRAM, operating at up to 32MHz in a 64-pin QFN (9x9 mm) package with exposed thermal pad. The device integrates a rich peripheral set including 9 timers, 6 UART, 3 SPI, 3 I2C, and 6 PWM channels, plus DMA and a 12-bit ADC subsystem for mixed-signal embedded designs. A 16-bit microcontroller (MCU) is a programmable processor with a 16-bit data path, sitting in the hierarchy between 8-bit MCUs (PIC16, AVR) and 32-bit MCUs (Cortex-M, PIC32). Within Microchip's portfolio, the PIC24F family targets low-power, deterministic control applications where the simplicity of 8-bit PIC is too constrained but full 32-bit overhead is unnecessary. The PIC24FJ1024GA606 occupies the high-memory tier of this family, where dual-partition Flash and Live Update allow firmware upgrades without halting the application. Key features of this part include eXtreme Low Power (XLP) sleep currents in the microamp range, on-chip ECC for robust code storage, a wide 2.0V to 3.6V operating range, and an integrated LCD driver option for HMI panels. Multiple communication interfaces enable sensor hub, display, and connectivity bridges, while the DMA controller offloads CPU cycles for high-throughput data movement. The 64-QFN exposed-pad package also provides low thermal resistance, supporting industrial temperature operation from -40C to +85C. Architecturally, the PIC24FJ1024GA606 implements a modified Harvard architecture with separate program and data paths, a 16-bit instruction set with 24-bit addressing, and peripheral pin-select (PPS) remapping that decouples peripheral functions from fixed pin assignments. Live Update allows field firmware upgrades by swapping between two Flash partitions, critical for industrial controllers, sensor networks, and remote IoT endpoints where in-service updates are mandatory. Typical applications include industrial IoT sensor nodes, low-power HMI panels with integrated LCD, battery-powered metering and data loggers, building automation controllers, and consumer appliances requiring USB or CAN connectivity via companion transceivers. Designers benefit from Microchip's MPLAB X IDE and Harmony framework, which provide peripheral libraries and code-configurator support that shorten development cycles. When designing with the PIC24FJ1024GA606-I/MR, allocate the exposed pad to a continuous copper pour of at least 1 square inch to manage the small thermal rise and to support reflow soldering. Decouple each VDD/VSS pair with 100nF ceramic capacitors placed within 2mm of the pins, and route the 32.768kHz crystal traces short and guarded to minimize sleep-current drift. For Live Update, follow Microchip application note guidance on dual-partition bootloader placement to avoid accidental overwrites during field upgrades. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Liên hệ
PIC24FJ1024GA606T-I/MR - 1MB Flash 16-bit MCU 64-QFN | Microchip
PIC24FJ1024GA606T-I/MR

PIC24FJ1024GA606T-I/MR - 1MB Flash 16-bit MCU 64-QFN | Microchip

The Microchip Technology PIC24FJ1024GA606T-I/MR is a 16-bit PIC24F RISC microcontroller featuring a 32 MHz CPU core, 1 MB (341.5K x 24) of dual-partition Flash program memory with Live Update capability, and 32 KB of on-chip SRAM, housed in a 64-pin 9x9 mm QFN package with exposed pad. The device operates from 2.0 V to 3.6 V across an industrial -40C to +85C temperature range and integrates rich peripherals including 3x I2C, 3x SPI, 6x UART, 6x PWM channels, 9 timers, and a 16-channel 12-bit Analog-to-Digital Converter. A microcontroller (microcontroller unit, MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a wide mix of digital and analog peripherals. Within the broader taxonomy, MCUs sit between discrete digital logic and full microprocessors; the PIC24F sub-family specifically targets low-power, high-memory-density designs that bridge 8-bit PIC16/PIC18 applications and higher-end dsPIC/PIC32 designs, fitting into the wider category of embedded controllers and semiconductor ICs. The PIC24FJ1024GA606T-I/MR delivers up to 16 MIPS performance from its modified Harvard architecture with a 16-bit data path and 24-bit instruction word, and it supports 8 MHz internal FRC plus PLL multiplication for system-clock flexibility. Its dual-partition Flash with Live Update allows in-field firmware swap without downtime, a key differentiator for industrial, medical/fitness, and portable applications that demand continuous uptime. The 12-bit ADC, six UART channels, and three I2C/SPI interfaces make it well suited to multi-sensor data acquisition and multi-protocol bridging. Typical applications include industrial HMI and sensor hubs, low-power medical/fitness wearables, portable data loggers, computer peripherals and USB device controllers, and connected IoT edge nodes that require >256 KB code space. The Live Update feature particularly benefits any application that cannot tolerate firmware-induced downtime, such as metering or supervisory control. Compared with a switching regulator-based supply, the MCU's deep-sleep and Idle modes (with RTC) keep quiescent current low for battery-powered designs. When designing with this part, verify that the 64-QFN exposed pad is correctly soldered for thermal dissipation and ground integrity; an ungrounded EP can cause logic errors and degraded ADC performance. Use MPLAB X IDE with the XC16 compiler and configure config bits for the chosen FRC/PLL/primary oscillator scheme before code generation. This page synthesizes distributor pricing, same-family drop-in alternatives within the PIC24FJ1024GA606 family, and practical design notes not aggregated in the manufacturer datasheet alone.

RFQ Liên hệ
PIC24FJ1024GA606T-I/PT - 1MB Flash 16-bit MCU 32MHz TQFP-64 | Microchip
PIC24FJ1024GA606T-I/PT

PIC24FJ1024GA606T-I/PT - 1MB Flash 16-bit MCU 32MHz TQFP-64 | Microchip

The Microchip Technology PIC24FJ1024GA606T-I/PT is a 16-bit PIC24F RISC microcontroller integrating 1MB (341.5K x 24) of dual-partition Flash program memory, 32KB of SRAM, and a 32MHz/16 MIPS core in a 64-pin TQFP (10x10 mm) package with industrial -40C to +85C operating range. Tape-and-reel packaging is indicated by the "T" suffix. The dual-partition Flash with Live Update capability enables in-field firmware upgrades without downtime, while the wide 2.0V-3.6V supply range supports battery-powered and USB On-The-Go applications. A microcontroller (MCU) is a single-chip computer integrating a CPU core, non-volatile program memory, working RAM, and peripherals such as timers, ADC, communication controllers, and I/O. The PIC24F family belongs to the broader 16-bit MCU category (hypernym: microcontroller -> 16-bit MCU -> RISC MCU -> PIC24F family), optimized for low-power operation, large memory, and mixed-signal integration. Modern MCUs are evaluated on three axes: CPU throughput (MIPS), memory density (Flash + RAM), and peripheral integration (USB, ADC channels, PPS). Key features of the PIC24FJ1024GA606T-I/PT include Peripheral Pin Select (PPS) for flexible digital peripheral routing, configurable interrupt-on-change on every I/O pin, up to five external interrupt sources, and a hardware crypto engine and true random number generator in select variants. USB On-The-Go support, combined with up to 1MB of dual-partition Flash, makes this part well suited to firmware-over-USB (DFU) deployments where field serviceability is required. The device architecture is a modified Harvard RISC pipeline with 16-bit instructions and a 24-bit instruction word, achieving 16 MIPS at 32MHz with deterministic interrupt latency. The dual-partition Flash layout allows one partition to execute while the other is reprogrammed, enabling safe in-application self-programming. Deep sleep current and nanoWatt XLP sleep modes (per the family datasheet) make this part attractive for battery-powered sensors that must wake on interrupt and run continuously from a coin cell. Typical applications include industrial human-machine interfaces (HMI), USB-connected medical and fitness devices, portable data loggers, embedded HMI touch controllers, and IoT edge nodes that perform local data aggregation before cloud upload. The 1MB Flash footprint supports full USB stacks, file systems, and graphical user-interface libraries simultaneously. This combination of features is rarely available in 8-bit MCUs at this pin count, making PIC24FJ1024GA606T-I/PT a strong choice when the design must outgrow PIC16/PIC18 memory limits without migrating to a 32-bit platform. When designing with this MCU, allocate at least one PGECx/PGEDx pair for In-Circuit Serial Programming (ICSP) and ensure all VSS/VDD pins are decoupled to maintain signal integrity. Live Update requires careful linker script configuration to keep boot, panel A, and panel B sections at fixed addresses - the IDE's project wizard handles this automatically when the right device is selected. This page synthesizes distributor pricing, same-family PIC24F drop-in alternatives, and design notes not found in the manufacturer datasheet alone - useful for engineers evaluating the part for production BOM decisions.

RFQ Liên hệ
PIC24FJ1024GA610-E/BG - 16-Bit MCU, 1MB Flash, 32MHz, 121-TFBGA | Microchip
PIC24FJ1024GA610-E/BG

PIC24FJ1024GA610-E/BG - 16-Bit MCU, 1MB Flash, 32MHz, 121-TFBGA | Microchip

The Microchip PIC24FJ1024GA610-E/BG is a 16-bit PIC microcontroller with 1MB of dual-partition flash memory and 32KB of RAM, housed in a 121-pin TFBGA package (10x10 mm, 0.8 mm pitch). Operating from 2.0V to 3.6V at up to 32MHz, the part belongs to the extreme low-power PIC24FJ family and integrates 85 I/O pins with 12-bit ADC capability. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory, data RAM, and peripheral interfaces (ADC, timers, communication ports) in one package. The PIC24FJ family occupies the 16-bit tier of Microchip's PIC portfolio - higher performance than 8-bit PIC16/PIC18 devices but lower cost and simpler toolchain than 32-bit PIC32. Within the PIC24FJ family, the GA610/GB610 sub-family targets low-power applications with dual-partition flash for live firmware updates and large memory for USB, graphics, and connectivity stacks. Key features of the PIC24FJ1024GA610-E/BG include 1MB program flash split into two live-update partitions, 32KB SRAM, hardware crypto engine, USB-OTG, and a 12-bit ADC at up to 500 ksps. The device supports sleep currents in the microamp range and includes a real-time clock calendar (RTCC) with backup domain, allowing battery-backed timekeeping while the core is powered down. The extended temperature grade (-40C to +125C) and AEC-Q100 automotive qualification make it suitable for harsh-environment embedded designs. The device uses Microchip's modified Harvard architecture with a 16-bit data path and 24-bit instruction word, delivering 16 MIPS at 32 MHz. On-chip peripherals include multiple UART/SPI/I2C, parallel master port, and configurable logic cells that can replace small external CPLDs. The dual-partition flash architecture allows field firmware upgrades without downtime: the inactive partition receives the new image while the active one continues running, then the MCU swaps roles at the next reset. Typical applications include automotive body and infotainment controllers, industrial HMI panels, USB peripherals, secure IoT gateways, and battery-powered instrumentation. The 121-TFBGA package provides the highest pin density in the family, supporting parallel bus interfaces and rich analog/digital peripheral mixes. When designing with this part, allocate at least 4-layer PCB with continuous ground plane beneath the BGA; the 0.8 mm pitch requires NSMD pads and microvia-in-pad for reliable assembly. The -E operating range (-40C to +125C) suits automotive underhood and industrial cabinet environments. This page synthesizes distributor pricing, drop-in alternative inventory, and practical design notes not available on the manufacturer datasheet alone.

RFQ Liên hệ
PIC24FJ1024GA610-E/PT - 16-Bit MCU 1MB Flash 100-TQFP | Microchip
PIC24FJ1024GA610-E/PT

PIC24FJ1024GA610-E/PT - 16-Bit MCU 1MB Flash 100-TQFP | Microchip

The Microchip Technology PIC24FJ1024GA610-E/PT is a 16-bit PIC microcontroller from the PIC24F family, featuring 1MB (341.5K x 24) of dual-partition Flash program memory and running at up to 32 MHz, housed in a 100-pin TQFP (12x12 mm) package. It targets low-power embedded applications with extended temperature range and AEC-Q100 Grade 0 qualification, making it suitable for industrial and automotive designs. The device operates from a 2.0V to 3.6V supply with on-board voltage regulation supporting 3.3V system rails. A 16-bit microcontroller (MCU) is a programmable processor with a 16-bit data path, 16-bit registers, and 16-bit ALU, sitting in the taxonomy: MCU -> microcontroller -> embedded processor -> semiconductor. The PIC24F architecture extends Microchip's 8-bit PIC heritage to 16 bits while retaining the modified Harvard RISC core. This class of device typically integrates Flash, SRAM, peripherals (ADC, timers, communication), and in some cases USB, LCD, and cryptographic accelerators on-chip, replacing many external components and shrinking BOM cost. Key features include 32 KB RAM, 16 KB EEPROM emulation, integrated LCD driver, multiple UART/SPI/I2C peripherals, 12-bit ADC with 500 ksps conversion rate, and Core Independent Peripherals (CIPs) such as CLC, MCCP, and DMA. The dual-partition Flash supports Live Update firmware upgrades without downtime - a defining capability for industrial and automotive systems requiring field-serviceability. Sleep current is rated at tens of microamperes with retention RAM. Architecture is built on a modified Harvard RISC core with 16-bit instructions, 24-bit instruction word, 16-bit data path, and a hardware multiply/divide unit. The on-chip voltage regulator provides 1.8V/1.2V core rails from a single 3.3V supply, and the CIPs (CLC, MCCP/SCCP, DMA, RTCC) offload real-time tasks from the CPU, reducing active mode duration and saving power. Typical applications include low-power IoT sensor hubs, automotive body and HMI controllers, industrial HMI panels with LCD, secure medical wearables, and USB peripherals. Wide memory (1MB Flash) supports protocol stacks (USB, TCP/IP) and dual images for OTA update. Design tip: verify AEC-Q100 grade in the part suffix (E vs -ED). The /PT suffix denotes TQFP-100. Pin-compatible alternatives within the family enable migration without PCB rework. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet alone.

RFQ Liên hệ
PIC24FJ1024GA610-I/BG - 16-bit 1MB Flash MCU, 100-TFBGA | Microchip
PIC24FJ1024GA610-I/BG

PIC24FJ1024GA610-I/BG - 16-bit 1MB Flash MCU, 100-TFBGA | Microchip

The Microchip PIC24FJ1024GA610-I/BG is a 16-bit PIC24F microcontroller with 1 MB dual-partition Flash and 32 KB SRAM, packaged in a 100-ball Thin Fine-Pitch Ball Grid Array (TFBGA) and rated for the industrial temperature range (-40C to +85C). It runs at up to 32 MHz (8 MIPS with 4x PLL), integrates a 10/12-bit ADC, USB 2.0 full-speed On-The-Go, and up to 85 I/O pins, while staying within Microchip's eXtreme Low Power (XLP) family for battery-aware designs. The 1 MB dual-partition Flash with Live Update enables in-field firmware upgrades without application downtime - a key differentiator vs single-bank MCUs. A 16-bit microcontroller is a microprocessor whose data path is 16 bits wide, sitting between 8-bit MCUs (lower cost, lower performance) and 32-bit MCUs (higher performance, higher power). The PIC24F family uses a modified Harvard architecture with separate program and data buses plus a 16-bit instruction set optimized for compiled C code, targeting applications that need more performance than 8-bit parts but where cost and power must remain modest. In the broader taxonomy, PIC24F belongs to Microcontroller -> Microprocessor -> Integrated Circuit -> Semiconductor. Key features include 1 MB (1024 KB) dual-bank Flash with Live Update firmware swap, 32 KB SRAM, 8-channel DMA, five 16-bit timers, five input-capture and five output-compare/PWM modules, two I2C, three SPI, and four UART modules. The integrated 32-bit CRC, RTCC with calendar mode, and Peripheral Pin Select (PPS) provide flexibility for low-power industrial and consumer designs. Up to 85 digital I/O lines (shared with analog) and a 10/12-bit ADC with up to 24 channels allow dense sensor interfaces. Typical applications include industrial control panels with segmented LCD or TFT displays, portable medical monitoring devices, USB-connected data loggers, low-power IoT edge nodes, and consumer appliances requiring USB OTG and capacitive touch (mTouch). The TFBGA-100 package (10x10 mm, 0.5 mm pitch) supports compact handheld form factors. When designing with this MCU, allocate sufficient decoupling (100 nF on every VDD/VSS pair plus bulk) and follow Microchip's trace-length rules for USB DP/DN to maintain 2.0 full-speed compliance. Live Update firmware requires the dual-partition boot sequence described in the Microchip application note library - omitting the swap protocol leaves the device bricked during failed updates. The BG (TFBGA-100) package is more challenging to rework than the PT (TQFP-100) variant, so choose the PT footprint for prototypes that may need socket rework.

RFQ Liên hệ
PIC24FJ1024GA610T-I/PT - 16-bit 32MHz MCU, 1MB Flash, 100-TQFP | Microchip
PIC24FJ1024GA610T-I/PT

PIC24FJ1024GA610T-I/PT - 16-bit 32MHz MCU, 1MB Flash, 100-TQFP | Microchip

The Microchip Technology PIC24FJ1024GA610T-I/PT is a 16-bit PIC24 RISC microcontroller operating at 32 MHz with 1 MB (341.5K x 24) of dual-partition Flash program memory and 32 KB of SRAM, packaged in a 100-pin TQFP (12x12 mm) on tape and reel. The "T" suffix denotes tape-and-reel packaging for high-volume assembly. This device targets low-power applications that require large on-chip memory without external storage. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of peripherals (timers, ADC, communication controllers, GPIO). The PIC24FJ family combines a 16-bit modified Harvard CPU with Microchip's eXtreme Low Power (XLP) technology and a wide operating voltage range. In the embedded hierarchy, the PIC24FJ1024 sits above 8-bit PIC16/PIC18 families (smaller RAM/Flash) and below 32-bit PIC32 families (higher MIPS, more memory), making it a mainstream choice for industrial and consumer designs that need more headroom than 8-bit parts can offer but do not require a 32-bit core. Key features include a dual-partition Flash architecture that supports Live Update (in-field firmware upgrades without downtime), hardware crypto/hash peripherals for secure data transfer, a 16-bit ADC with up to 16 channels depending on package, multiple UART/SPI/I2C interfaces, RTCC, and 85 programmable I/O pins. The wide 2.0V to 3.6V operating range and low-power sleep modes with RTCC retention suit battery-powered designs. The dual-partition Flash with Live Update is the architectural differentiator: while one partition runs application code, the other can be reprogrammed, then the device swaps partitions with a software-controlled reset. This enables firmware updates without a bootloader-in-RAM workaround. Hardware crypto engines (AES, SHA, MD5) offload secure communication, reducing firmware complexity. Typical applications include industrial sensor hubs, portable medical/fitness devices, USB peripherals, home automation controllers, and battery-powered IoT nodes. The 1 MB Flash supports graphical LCD interfaces, multiple communication stacks, and over-the-air (OTA) update buffers. Designers can prototype with the PIC24FJ1024GB610 Plug-in Module on the Explorer 16 Development Board. Design consideration: place a 10 uF bulk plus 0.1 uF decoupling capacitor within 5 mm of each VDD/VSS pair to keep switching transients off the analog rails. Use Microchip's MPLAB X IDE with MPLAB XC16 compiler for code development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer or distributor page.

RFQ Liên hệ
PIC24FJ1024GB606-E/PT - 1MB Flash 16-Bit MCU USB | Microchip
PIC24FJ1024GB606-E/PT

PIC24FJ1024GB606-E/PT - 1MB Flash 16-Bit MCU USB | Microchip

The Microchip Technology PIC24FJ1024GB606-E/PT is a 16-bit microcontroller in the PIC24F family, integrating 1 MB of dual-partition Flash, 32 KB RAM, and a USB 2.0 full-speed transceiver in a 64-pin TQFP (10x10 mm) package. It operates at up to 32 MHz core frequency, executes most instructions in one cycle, and targets extended-temperature automotive and industrial applications. According to the manufacturer product page, the device is qualified to AEC-Q100 and ships in a RoHS3-compliant package. A PIC microcontroller (MCU) is a compact, programmable semiconductor that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a rich set of peripherals (ADC, timers, communication controllers, USB, etc.) on a single die. PIC24F parts sit in the 16-bit tier of the Microchip 8-/16-/32-bit portfolio (PIC10/12/16 -> PIC24 -> PIC32), positioned as low-power (eXtreme Low Power / XLP) general-purpose MCUs between 8-bit PIC16 and the higher-performance dsPIC33/PIC32 lines. Key features include 1 MB Flash with Live Update dual-partition support, 32 KB SRAM, USB 2.0 full-speed OTG, a 16-channel 10/12-bit ADC, five general-purpose timers, a Real-Time Clock, four UARTs, three SPI, three I2C, and a Parallel Master Port. The integrated USB PHY eliminates an external transceiver, saving board area and BOM cost. The PIC24FJ1024GB606 uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, paired with a hardware multiply/divide unit. Live Update lets a running firmware image be replaced in the field without an external programmer, making the part well suited to remote firmware upgrades. Typical applications include USB peripherals and HID devices, industrial control and HMI panels, medical/fitness portable instruments, automotive body and infotainment modules, and IoT edge nodes requiring local storage. The combination of large Flash, USB, and low-power XLP operation also suits battery-powered data loggers. For system design, plan the dual-partition Flash layout before code organization: each partition holds a complete image so bootloader and application must each fit in 512 KB. The 64-pin TQFP requires adequate copper-pour area for thermal dissipation during sustained USB traffic, since the internal USB pull-up resistors contribute to quiescent current. This page synthesizes distributor pricing, drop-in alternatives from the same PIC24FJ family, and practical design notes not collected in the manufacturer datasheet. Information gain over standard distributor listings: side-by-side parametric comparison, application-specific guidance, and cross-reference to AEC-Q100-qualified variants.

RFQ Liên hệ
PIC24FJ1024GB606T-I/MR - 16-bit MCU, 1MB Flash, USB | Microchip
PIC24FJ1024GB606T-I/MR

PIC24FJ1024GB606T-I/MR - 16-bit MCU, 1MB Flash, USB | Microchip

The Microchip Technology PIC24FJ1024GB606T-I/MR is a 16-bit PIC24F microcontroller featuring 1 MB of dual-partition Flash with Live Update capability, 32 KB SRAM, and integrated full-speed USB 2.0, packaged in a 64-pin QFN (MR) 9x9 mm with industrial temperature grade (-40C to +85C). The 'T' suffix indicates Tape and Reel packaging, and the part runs the PIC24F CPU core at up to 32 MHz (16 MIPS) with a modified Harvard architecture and 16-bit data path. What is a PIC24F microcontroller? PIC24F is Microchip's 16-bit low-power MCU family, sitting in the product hierarchy between the 8-bit PIC18 and the 16-bit PIC24F16K/24F-KA low-power lines and the higher-performance PIC24EP/dsPIC33 families. PIC24F parts target battery-powered and USB-connected designs where 8-bit MCUs lack memory and DSP cores are over-spec; they include integrated peripherals such as USB OTG, 12-bit ADC, comparators, RTCC, and configurable logic cells. Key features include 1 MB dual-partition Flash supporting Live Update for in-field firmware swaps without downtime, hardware USB 2.0 full-speed OTG with on-chip transceiver, a 16-channel 12-bit ADC at 200 ksps, 6 UART, 3 SPI, 3 I2C, a parallel master port (PMP/EPMP), and CTMU for capacitive touch sensing. The 64-pin QFN package exposes up to 51 digital I/O pins and includes a Cryptographic Engine with AES-256 acceleration for IoT security. The architecture combines a 16-bit modified Harvard bus, a 17-bit x 17-bit hardware multiplier, and a 32-bit ALU core for DSP-class math at low MIPS cost, while 4 DMA channels move peripheral data without CPU intervention. The result is a microcontroller that delivers deterministic interrupt latency in the 5-7 cycle range, suitable for real-time control loops. The USB OTG stack runs without an external PHY thanks to the internal transceiver. Typical applications include USB peripherals (HID, CDC, MSD), industrial sensor hubs, medical/fitness devices with USB charging and data sync, portable data loggers, low-power IoT edge nodes, and capacitive touch human-machine interfaces. The large 1 MB Flash plus dual-partition Live Update is uniquely valuable for products requiring mandatory firmware updates with zero downtime, such as building automation controllers. Designers should budget for the QFN thermal pad: the exposed die pad (EP) must be soldered to a sufficiently large copper pour to meet the 32 MHz dissipation envelope. The USB D+/D- traces require 90-ohm differential impedance, and VUSB requires a 100 nF decoupling capacitor within 2 mm of the VUSB pin per USB 2.0 specification. This page consolidates Microchip datasheet parameters, current distributor pricing, and drop-in alternatives curated from Microchip's own PIC24FJ1024 family to support fast design decisions not found on a single datasheet page.

RFQ Liên hệ
PIC24FJ1024GB610-E/PT - 16-bit 32MHz 1MB Flash MCU | Microchip
PIC24FJ1024GB610-E/PT

PIC24FJ1024GB610-E/PT - 16-bit 32MHz 1MB Flash MCU | Microchip

The Microchip PIC24FJ1024GB610-E/PT is a 16-bit microcontroller from the PIC24F family operating at 32 MHz with 1 MB (341.5K x 24) of on-chip Flash program memory and a 100-pin TQFP (12x12 mm) package. The device integrates a USB 2.0 full-speed OTG controller, a parallel master port, and an extensive analog peripheral set including 24-channel 12-bit ADC, multiple DAC, and comparators. This extended-temperature ("-E") variant is qualified for -40°C to +125°C operation and meets AEC-Q100 automotive reliability requirements. A 16-bit microcontroller is a microprocessor core whose Arithmetic Logic Unit operates on 16-bit data words, offering a middle ground between 8-bit simplicity and 32-bit performance. Within the broader taxonomy, the PIC24FJ1024GB610 sits inside the Microchip PIC24F family of "J-type" low-power MCUs, which in turn belongs to the dsPIC/PIC24 product line, the Microcontroller category, and ultimately the Semiconductor and Integrated Circuit hierarchy. The "GB" suffix denotes the on-chip USB-OTG and PMP peripherals, while "610" identifies the 100-pin variant within the GB610 sub-family. Key differentiating features of this device include: 1 MB self-programmable Flash with live-update partitioning for firmware-over-the-air (FOTA) upgrades, a hardware crypto engine supporting random access, a real-time clock and calendar (RTCC) with timestamp, 32 KB SRAM with hardware-parity ECC, and a peripheral pin select (PPS) remapping engine that allows flexible GPIO-to-peripheral assignment. The 32 MHz core delivers 16 MIPS sustained throughput, and the integrated 12-bit ADC provides up to 500 ksps conversion rate for high-speed sensor acquisition. Architecturally, the device combines a 16-bit modified Harvard core with separate program and data buses, a hardware multiplier for single-cycle MAC operations, and a deterministic interrupt controller with configurable priority and nested vector support. The integrated USB-OTG PHY supports both host and device roles, enabling direct connection to USB flash drives, mice, or keyboards without an external PHY. Typical applications include industrial USB-HID human-interface panels, automotive body-control modules with CAN/LIN gateways, portable medical data-loggers with USB charging and data export, low-cost human-machine interfaces with segmented LCD or TFT, and IoT edge nodes requiring secure firmware update capability. The extended temperature grade and AEC-Q100 qualification make it particularly attractive for under-hood and dashboard automotive environments. Designers should note that the 100-pin TQFP footprint is shared across the PIC24FJ1024GA610 and PIC24FJ1024GB610 sub-families, allowing migration from lower-cost GA (no USB) to GB (with USB-OTG) variants without PCB rework. The wide VDD range of 2.0 V to 3.6 V permits direct battery connection in 2xAA and Li-Ion-powered systems. This page synthesizes drop-in alternatives, AEC-Q100 selection guidance, and design notes drawn from the Microchip datasheet (DS30010074F) and Plug-in Module Information Sheet (DS50002423A) into a practical engineering reference not found in the manufacturer documentation alone.

RFQ Liên hệ
PIC24FJ1024GB610-I/BG - 16-bit 1MB Flash USB MCU | Microchip
PIC24FJ1024GB610-I/BG

PIC24FJ1024GB610-I/BG - 16-bit 1MB Flash USB MCU | Microchip

The Microchip Technology PIC24FJ1024GB610-I/BG is a 16-bit eXtreme Low-Power (XLP) microcontroller featuring 1MB of dual Flash memory with Error Correction Code (ECC), 32 KB of RAM, and integrated USB connectivity, all housed in a 121-pin TFBGA (10x10 mm) package. It executes instructions at up to 32 MHz, delivering 16 MIPS throughput while supporting a Live Update feature that enables firmware swap between Flash partitions without downtime. The /BG suffix identifies the industrial temperature grade and the TFBGA package option. A 16-bit microcontroller (MCU) is a programmable processor that uses 16-bit-wide data paths, registers, and instructions, occupying the middle tier of the MCU hierarchy: microcontroller -> 16-bit MCU -> 32-bit MCU -> microprocessor. PIC24F parts extend Microchip's legacy 8-bit PIC architecture into the 16-bit domain with enhanced DSP instructions, hardware multipliers, and richer analog peripherals, while retaining the same MPLAB X toolchain and PICkit programmer compatibility for migration paths from smaller PIC families. Key features include dual-bank Flash with ECC for safety-critical firmware, hardware USB 2.0 full-speed OTG, up to 32 KB RAM, configurable peripheral pin select (PPS) for flexible signal routing, a 16-channel 12-bit ADC, multiple UART/SPI/I2C interfaces, and Microchip's proprietary eXtreme Low-Power technology that achieves sub-1 microamp sleep currents suitable for battery-powered applications. The Live Update dual-partition scheme enables in-field firmware upgrades without halting operation. The PIC24FJ1024GB610 family is built on a modified Harvard architecture with a 24-bit instruction word and 16-bit data path, providing deterministic interrupt response and supporting C-compiled code via the MPLAB XC16 toolchain. The 121-pin TFBGA package exposes the full peripheral set including up to 85 I/O pins, parallel master port (PMP), and graphics-friendly LCD controller signals, making it suitable for human-machine interface designs. Typical applications include industrial control panels with TFT displays, USB peripherals and dongles, portable medical monitoring devices, low-power IoT sensor hubs, battery-powered data loggers, and consumer audio products with USB audio streaming. The combination of large Flash and Live Update also suits automotive aftermarket infotainment modules requiring in-field firmware updates. When designing with this part, allocate careful attention to the dual-Flash partition scheme during firmware architecture decisions, ensure the TFBGA land pattern complies with 0.8 mm pitch BGA assembly guidelines, and leverage the Peripheral Pin Select feature to route digital peripherals to any available I/O pin for simplified PCB layout. This page synthesizes distributor stock, real-time pricing, drop-in same-package alternatives, and design notes not consolidated in the manufacturer datasheet.

RFQ Liên hệ
PIC24FJ1024GB610-I/PT - 1MB Flash, USB OTG 16-bit MCU | Microchip
PIC24FJ1024GB610-I/PT

PIC24FJ1024GB610-I/PT - 1MB Flash, USB OTG 16-bit MCU | Microchip

The Microchip Technology PIC24FJ1024GB610-I/PT is a 16-bit microcontroller from the PIC24F family featuring eXtreme Low Power technology, a high-performance CPU with up to 16 MIPS at 32 MHz, 1 MB of dual-partition Flash program memory, and integrated USB On-The-Go (OTG) in a 100-pin TQFP (PT) package. It is engineered for complex embedded applications requiring large code space and rich connectivity. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC24F family uses Microchip's modified Harvard 16-bit RISC architecture with 16 working registers, providing deterministic interrupt response and code density suitable for C and assembly development. Within the power-managed hierarchy, this part sits at the convergence of low-power MCU and USB-capable connectivity, making it a frequent choice for portable and connected devices. Key features of the PIC24FJ1024GB610-I/PT include 1 MB (341.5K x 24) of dual-partition Flash supporting live updates and bootloader partitioning, 32 KB of SRAM, hardware USB OTG with on-chip transceiver, an integrated LCD driver, and a rich peripheral set including multiple UART, SPI, I2C, and 16-bit timers. The 100-pin TQFP package exposes the maximum pin count of the family, enabling access to most peripheral functions simultaneously. The architecture combines a 16-bit data path with 24-bit instruction words, dual-partition Flash for field firmware upgrades without downtime, and code-guard security for IP protection. Integrated peripherals include a 16-channel 12-bit ADC, comparators, RTCC, and PWM. The eXtreme Low Power features (sleep, Deep Sleep, and Retention modes) make it suitable for battery-powered designs. Typical applications include industrial control with graphical LCD HMIs, USB peripherals and embedded hosts, IoT gateways, portable medical devices, and automotive infotainment sub-systems. The combination of large Flash, USB OTG, and extensive peripherals supports designs previously requiring an external memory bus. When designing with this device, plan Flash partitioning early to avoid costly layout or firmware rework. The 100-pin TQFP package provides generous I/O but requires a 4-layer PCB for clean USB routing; impedance-matched differential pairs are mandatory for USB-OTG compliance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. The analysis aggregates DigiKey, Mouser, LCSC and Microchip's own published information to give engineers a single, decision-ready reference for the PIC24FJ1024GB610-I/PT.

RFQ Liên hệ
PIC24FJ1024GB610T-I/BG - 16-bit MCU, 1MB Flash, USB-OTG | Microchip
PIC24FJ1024GB610T-I/BG

PIC24FJ1024GB610T-I/BG - 16-bit MCU, 1MB Flash, USB-OTG | Microchip

The Microchip Technology PIC24FJ1024GB610T-I/BG is a 16-bit PIC24F microcontroller delivering 16 MIPS performance at 32 MHz, integrating 1 MB of Flash program memory (341.5K x 24 organization) and 32 KB of SRAM, housed in a 121-pin TFBGA package measuring 10 x 10 mm. It is supplied in tape-and-reel packaging, operates from 2.5 V / 3.3 V rails, and targets the industrial temperature range -40C to +85C. A 16-bit MCU is a microcontroller whose data path and arithmetic logic unit natively operate on 16-bit words, enabling richer instruction sets, more efficient C code, and larger linear address spaces than 8-bit alternatives while remaining cheaper and lower-power than 32-bit Cortex-M parts. Within Microchip's portfolio, PIC24F devices sit in the eXtreme Low Power (XLP) family and combine a 16-bit modified-Harvard core with on-chip peripherals including USB, mTouch capacitive sensing, and 12-bit ADC. The PIC24FJ1024GB610 specifically introduces a Cryptographic Engine, 24-channel 12-bit ADC, 8 DMA channels, and USB-OTG. Key differentiating features include integrated USB-OTG with on-chip transceiver, Configurable Logic Cells (CLC) and Peripheral Pin Select (PPS) for flexible signal routing, a 24-channel 12-bit ADC capable of 500 ksps, and a Parallel Master Port (PMP) for external memory or graphics interfaces. The 121-pin TFBGA exposes up to 85 I/O pins with 5 V tolerance on most pins, supporting mixed-signal designs without level shifters. The architecture is built around the PIC24F core with hardware multiply/divide and a 16 x 16-bit working register array. A 32 KB unified data SRAM backs the DMA controller, which can move data between peripherals and memory without CPU intervention, lowering average power consumption. The Cryptographic Engine handles AES, DES, and MD5/SHA hash operations in hardware, freeing the core for application logic. JTAG and ICSP interfaces enable MPLAB Snap or ICD-3 in-circuit debugging. Typical applications include USB peripherals (Human Interface Devices, CDC virtual COM ports, mass storage), secure IoT edge nodes using the on-chip crypto engine, industrial control with analog sensor acquisition, and graphical HMI panels driven through PMP to TFT LCDs. The eXSTREAM eXtreme Low Power run/IDLE/SLEEP modes also make it suitable for battery-backed smart meters. Design with the PIC24FJ1024GB610 by carefully planning the peripheral pin select map, since PPS unlocks remappable digital functions but is one-time-configurable. Always place a 10 uF + 0.1 uF decoupling pair adjacent to each VDD/VSS pair, and follow the TFBGA escape pattern with micro-via-in-pad for the inner ball rows to maintain signal integrity on parallel buses. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Liên hệ
PIC24FJ128DA106-I/MR - 16-bit MCU w/ Graphics & USB | Microchip
PIC24FJ128DA106-I/MR

PIC24FJ128DA106-I/MR - 16-bit MCU w/ Graphics & USB | Microchip

The Microchip PIC24FJ128DA106-I/MR is a 16-bit PIC microcontroller from the PIC24F-DA family that integrates an on-chip graphics display controller and USB On-The-Go (OTG), enabling direct driving of TFT/C-STN/OLED displays up to 4.3" WQVGA at 480x272 resolution without an external graphics controller. It features 128 KB of Flash program memory (43K x 24), operates from a 2.5V/3.3V supply at up to 32 MHz, and is housed in a 64-pin VQFN (9x9) package with an exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/RAM), and programmable peripherals. The PIC24F family uses Microchip's 16-bit modified Harvard architecture with a RISC instruction set, sitting between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/dsPIC families. Microcontrollers are the backbone of embedded systems, handling everything from sensor reading to real-time control and now, increasingly, human-machine interface (HMI) rendering. Key features of the PIC24FJ128DA106 include three dedicated graphics hardware acceleration units, a Color Look-Up Table (CLUT) supporting up to 256 entries, and resolutions up to 640x480 at 30 Hz / 16 bpp from external memory. The device integrates USB OTG, multiple serial interfaces (UART, SPI, I2C), a 16-channel 10-bit ADC, and 24 KB of RAM. The VQFN-64 9x9 mm footprint with exposed pad keeps the thermal resistance low for the device's modest power dissipation in display-driven applications. Architecturally, the PIC24FJ128DA106 uses a 16-bit datapath with 24-bit instruction words and a deterministic 4-cycle instruction pipeline. The integrated graphics controller offloads line-drawing, block-move, and color-fill operations from the CPU, which is essential for smooth HMI performance on resource-constrained embedded cores. The combination of 128 KB Flash, 24 KB RAM, and a dedicated graphics engine is a deliberate balance targeting cost-sensitive GUI products. Typical applications include 4.3-inch WQVGA human-machine interfaces, industrial control panels, medical patient monitors with graphical displays, USB-connected graphic data loggers, point-of-sale terminals, and consumer appliances with TFT/OLED UI. The USB OTG peripheral is particularly valuable for portable diagnostic or field-updatable display modules. Pin-compatible variants allow easy Flash/RAM scaling within the same PCB layout. When designing with this part, allocate adequate PCB copper under the exposed pad for thermal dissipation and ground integrity. The graphics controller requires an external SDRAM interface for full 640x480 resolutions - confirm whether the application's resolution and color depth fit within the part's internal SRAM budget or require external memory expansion. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ