PIC24FJ1024GA606-E/PT - 16-Bit MCU 1MB Flash 32KB RAM 64-TQFP | Microchip
MPN: PIC24FJ1024GA606-E/PT ✗ Cuối đờiPIC24FJ1024GA606-E/PT Tóm tắt
A PIC24 microcontroller is a 16-bit modified-Harvard architecture MCU built around the PIC instruction set, which sits between 8-bit PIC16/PIC18 parts and the 32-bit PIC32MX/PIC32MZ devices. It belongs to the broader category of microcontrollers (MCUs) within the embedded integrated circuit hierarchy: MCU -> microcontroller IC -> embedded processor -> semiconductor. The PIC24F sub-family is engineered for low-power, mixed-signal applications where USB, graphics, and connectivity peripherals are commonly required.
Key features of the PIC24FJ1024GA606 include 1 MB Flash (341.5K words x 24 bits) with Error Correction Code, dual-partition memory for Live Update firmware swapping, 32 KB SRAM, 53 general-purpose I/O pins, 12-bit ADC, multiple communication peripherals, and 9 timers with 6 PWM channels and 8 DMA channels. The device is supplied in a -40C to +125C extended temperature grade, suitable for industrial and harsh-environment deployments.
Architecturally, the PIC24FJ1024GA606 integrates a wide peripheral set including 3 I2C, 3 SPI, and 6 UART modules, plus dedicated USB and real-time clock peripherals. Live Update dual-partition Flash enables in-field firmware upgrades without downtime, and ECC on Flash ensures reliable operation in safety-conscious applications. The 64-TQFP package (10x10 mm) provides ample I/O count for parallel-bus or display interfaces.
Typical applications include industrial control panels, low-power IoT sensor hubs, USB human-interface devices, home appliance control boards, and battery-powered instrumentation where the large 1 MB Flash supports complex protocol stacks (TLS, USB stacks, graphics libraries).
When designing with this part, evaluate the actual active-mode current at 32 MHz and the deep-sleep current to size battery budgets. Pin 1 indicator and TQFP-64 footprint are standard, enabling compatibility with existing PIC24FJ Explorer 16 development ecosystems.
This page synthesizes distributor pricing, drop-in alternatives within the PIC24FJ family, and practical design notes not found in the manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho PIC24FJ1024GA606-E/PT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24FJ1024GA606-E/PT (cùng hình factor và footprint) — khác nhau ở Package, Operating Temperature, ADC, Mounting Type, Core Architecture.
PIC24FJ1024GA606-I/PT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC24FJ1024GA606T-I/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24EP512GP206-I/PT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC24EP256MC206-I/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24FJ1024GA606-E/PT Tỷ lệ tối đa & tính chất điện
| Manufacturer | Microchip Technology |
| Series | PIC24F |
| Core Processor | PIC24 |
| Core Size | 16-Bit |
| Maximum CPU Speed | 32 MHz |
| Program Memory Size | 1 MB (341.5K x 24) Flash |
| RAM Size | 32 KB |
| Flash ECC | Yes (Error Correction Code) |
| Dual Partition / Live Update | Yes |
| Number of I/O Pins | 53 |
| Timers | 9 |
| PWM Channels | 6 |
| DMA Channels | 8 |
| UART Modules | 6 |
| SPI Modules | 3 |
| I2C Modules | 3 |
| ADC Resolution | 12-bit |
| Hộp | 64-TQFP (10x10 mm) |
| Kiểu lắp đặt | Surface Mount |
| Khoảng nhiệt độ hoạt động | -40C to +125C (Extended) |
| Trạng thái RoHS | Compliant |
| Trạng thái vòng đời | Not Recommended for new designs (NRND) |
Cấu hình chân PIC24FJ1024GA606-E/PT
| Chân 1 | RP15/PMD15/RB15 — Remappable I/O / Parallel Master Data |
| Chân 2 | VSS — Ground reference |
| Chân 3 | VDD — Positive supply voltage |
| Chân 4 | SOSCI/RP4/CN4/RB4 — Secondary oscillator / Remappable I/O |
| Chân 5 | SOSCO/T1CK/CN3/RB5 — Secondary oscillator output / Timer1 clock |
| Chân 6 | RP20/PMD20/RA0 — Remappable I/O / Parallel Master Data |
| Chân 7 | RP21/RA1 — Remappable I/O |
| Chân 8 | RP22/RA2 — Remappable I/O |
| Chân 9 | RP23/RA3 — Remappable I/O |
| Chân 10 | RP24/RA4 — Remappable I/O |
| Chân 11 | RP25/RA5 — Remappable I/O |
| Chân 12 | VSS — Ground reference |
| Chân 13 | VDD — Positive supply voltage |
| Chân 14 | RP26/RA6 — Remappable I/O |
| Chân 15 | RP27/RA7 — Remappable I/O |
| Chân 16 | RP28/RA8 — Remappable I/O |
| Chân 17 | RP29/RA9 — Remappable I/O |
| Chân 18 | RP30/RA10 — Remappable I/O |
| Chân 19 | RP31/RA11 — Remappable I/O |
| Chân 20 | VSS — Ground reference |
| Chân 21 | VDD — Positive supply voltage |
| Chân 22 | RP0/PMD0/RB0 — Remappable I/O / Parallel Master Data |
| Chân 23 | RP1/PMD1/RB1 — Remappable I/O / Parallel Master Data |
| Chân 24 | RP2/PMD2/RB2 — Remappable I/O / Parallel Master Data |
| Chân 25 | RP3/PMD3/RB3 — Remappable I/O / Parallel Master Data |
| Chân 26 | RP4/PMD4/RB4 — Remappable I/O / Parallel Master Data |
| Chân 27 | RP5/PMD5/RB5 — Remappable I/O / Parallel Master Data |
| Chân 28 | VSS — Ground reference |
| Chân 29 | VDD — Positive supply voltage |
| Chân 30 | OSCI/CLKI/RA12 — Primary oscillator input / clock input |
| Chân 31 | OSCO/CLKO/RA13 — Primary oscillator output / clock output |
| Chân 32 | RP8/PMD8/RB8 — Remappable I/O / Parallel Master Data |
| Chân 33 | RP9/PMD9/RB9 — Remappable I/O / Parallel Master Data |
| Chân 34 | RP10/PMD10/RB10 — Remappable I/O / Parallel Master Data |
| Chân 35 | RP11/PMD11/RB11 — Remappable I/O / Parallel Master Data |
| Chân 36 | VSS — Ground reference |
| Chân 37 | RP12/PMD12/RB12 — Remappable I/O / Parallel Master Data |
| Chân 38 | RP13/PMD13/RB13 — Remappable I/O / Parallel Master Data |
| Chân 39 | RP14/PMD14/RB14 — Remappable I/O / Parallel Master Data |
| Chân 40 | PGEC1/RP16/RC0 — ICSP programming clock / Remappable I/O |
| Chân 41 | PGED1/RP17/RC1 — ICSP programming data / Remappable I/O |
| Chân 42 | RP18/RC2 — Remappable I/O |
| Chân 43 | RP19/RC3 — Remappable I/O |
| Chân 44 | VUSB3V3 — USB internal transceiver supply |
| Chân 45 | VUSB — USB power supply pin |
| Chân 46 | D+ — USB D+ data line |
| Chân 47 | D- — USB D- data line |
| Chân 48 | VSS — Ground reference |
| Chân 49 | OSC1/RC12 — Crystal oscillator input |
| Chân 50 | OSC2/RC13 — Crystal oscillator output |
| Chân 51 | PGEC2/RC14 — Alternate ICSP programming clock |
| Chân 52 | PGED2/RC15 — Alternate ICSP programming data |
| Chân 53 | RP6/RC4 — Remappable I/O |
| Chân 54 | RP7/RC5 — Remappable I/O |
| Chân 55 | RP8/RC6 — Remappable I/O |
| Chân 56 | RP9/RC7 — Remappable I/O |
| Chân 57 | RP10/RC8 — Remappable I/O |
| Chân 58 | RP11/RC9 — Remappable I/O |
| Chân 59 | VSS — Ground reference |
| Chân 60 | VDD — Positive supply voltage |
| Chân 61 | AVDD — Analog positive supply |
| Chân 62 | AVSS — Analog ground |
| Chân 63 | MCLR — Master clear reset (active low) |
| Chân 64 | ENVREG — Voltage regulator enable |
Ứng dụng tiêu biểu
PIC24FJ1024GA606-E/PT phù hợp cho 7 Áp dụngs: Industrial Control Panel HMI, Low-Power IoT Sensor Hub, USB Human Interface Device, Home Appliance Control Board, Battery-Powered Medical Instrument, Automotive Infotainment Auxiliary Controller, Educational Development Platform.
Industrial Control Panel HMI
The PIC24FJ1024GA606-E/PT fits industrial Human-Machine Interface panels because its 1 MB Flash easily holds graphics libraries, USB stacks, and multi-language fonts, while the 53 I/O pins drive LCDs, keypads, and indicator LEDs simultaneously. Its 32 KB SRAM and 8 DMA channels keep the main CPU free while handling continuous LCD refresh, touch scanning, and serial protocol traffic to fieldbus masters. The -40C to +125C extended temperature grade ensures reliable operation in factory-floor enclosures, and the 32 MHz PIC24F core consumes minimal current in display idle states. Peripherals: 6 UARTs handle RS-485/MODBUS masters, 3 SPI ports drive display controllers, and the 12-bit ADC reads analog sensor inputs.
Được đề xuất
Low-Power IoT Sensor Hub
The PIC24FJ1024GA606-E/PT is suited for IoT sensor hubs thanks to its eXtreme Low Power PIC24F architecture, which offers multiple deep-sleep modes with sub-microamp currents. The 1 MB Flash supports TLS libraries and Over-The-Air firmware update stacks, while the 8 DMA channels enable efficient background sampling of multiple sensors without CPU intervention. The 6 UARTs, 3 SPI, and 3 I2C ports aggregate data from various sensors (temperature, humidity, accelerometers, gas sensors) into a single gateway node. Live Update dual-partition Flash allows safe firmware upgrades across the installed base without service interruption, which is critical for deployed IoT fleets.
Được đề xuất
USB Human Interface Device
The PIC24FJ1024GA606-E/PT works well in USB Human Interface Devices (keyboards, mice, custom HID controls, programmable keypads) because of its integrated USB peripheral and the 1 MB Flash that fits USB stacks plus rich HID report descriptors. The 53 I/O pins scan key matrices up to 8x8 or larger, while 9 timers provide debouncing, macro recording, and RGB LED PWM control without software overhead. Live Update dual-partition Flash enables field firmware upgrades to add features or fix bugs after deployment. The 32 KB SRAM is ample for USB endpoint buffers, macro storage, and HID report history.
Được đề xuất
Home Appliance Control Board
The PIC24FJ1024GA606-E/PT serves as the main controller in white goods and home appliances, where it drives motor control (via PWM and timers), reads temperature/pressure sensors (via 12-bit ADC), and manages user interfaces (keypads, displays, buzzers). The -40C to +125C extended temperature range handles hot appliance environments like oven control boards and washing machine motor drives. The 1 MB Flash supports complex state machines, fault diagnostics, and communication stacks (Wi-Fi/BLE via companion modules). The 6 UARTs connect to multiple subsystems (inverter boards, sensor modules, display modules) in parallel.
Được đề xuất
Battery-Powered Medical Instrument
The PIC24FJ1024GA606-E/PT is appropriate for portable medical instruments such as glucose meters, pulse oximeters, and ambulatory monitors, where its eXtreme Low Power modes extend battery life and its 12-bit ADC provides accurate biosignal measurements. The 1 MB Flash accommodates calibration tables, patient history storage, and BLE/USB communication stacks. The 53 I/O pins drive LCDs, button inputs, and sensor interfaces (SpO2 probe, test strip connector). The Live Update dual-partition Flash enables safe regulatory-required firmware updates after deployment without device bricking risk.
Được đề xuất
Automotive Infotainment Auxiliary Controller
The PIC24FJ1024GA606-E/PT functions as an auxiliary controller in automotive infotainment subsystems, where it manages button clusters, rotary encoders, HVAC controls, and ambient lighting. The 53 I/O pins and 6 PWM channels drive LED backlighting and motor-driven vents, while the 6 UARTs communicate with the head unit, CAN bridge, and HVAC modules. The -40C to +125C extended temperature grade handles under-dash thermal conditions, and the 1 MB Flash supports complex diagnostic protocols. Note: this part is NOT AEC-Q100 qualified; for true automotive designs, consider PIC24FJ1024GA606-E/PT only in non-safety auxiliary roles or select AEC-Q100 successors.
Được đề xuất
Educational Development Platform
The PIC24FJ1024GA606-E/PT is widely adopted in university embedded systems courses and professional training programs because its 1 MB Flash, 32 KB RAM, and rich peripheral mix (USB, I2C, SPI, UART, ADC, PWM, DMA) expose students to nearly all common MCU subsystems in a single chip. The 64-TQFP package is breadboard-friendly with breakout boards, and Microchip's MPLAB X IDE plus XC16 compiler offer a free, well-supported toolchain. The PIC24F eXtreme Low Power features teach real-world energy-management concepts. The 53 I/O pins support capstone projects spanning robotics, sensor fusion, and IoT applications.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC24FJ1024GA606-E/PT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC24FJ1024GA606-I/PT | PIC24FJ1024GA606T-I/PT | PIC24EP512GP206-I/PT | PIC24EP256MC206-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP - same | 64-TQFP - same |
| Core | PIC24F 16-bit @ 32 MHz | PIC24F 16-bit @ 32 MHz | PIC24F 16-bit @ 32 MHz | PIC24EP 16-bit @ 70 MIPS | PIC24EP 16-bit @ 70 MIPS (motor control) |
| Flash Memory | 1 MB (341.5K x 24) | 1 MB | 1 MB | 512 KB (-49%) | 256 KB (-75%) |
| RAM Size | 32 KB | 32 KB | 32 KB | 48 KB | 32 KB |
| Temperature Grade | Extended -40C to +125C (-E) | Industrial -40C to +85C (-I) | Industrial -40C to +85C (-I) | Industrial -40C to +85C (-I) | Industrial -40C to +85C (-I) |
| Number of I/O Pins | 53 | 53 | 53 | 53 | 53 |
| Lifecycle Status | NRND | NRND | NRND | Active | Active |
| Live Update / Dual Partition Flash | Yes | Yes | Yes | No | No |
| USB Peripheral | Yes (USB FS Device/Host/OTG) | Yes | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- 1 MB dual-partition Flash with Live Update (vsPIC24EP512GP206-I/PT)
- Extended temperature grade -40C to +125C (vsPIC24FJ1024GA606-I/PT)
- eXtreme Low Power architecture (vsPIC24EP256MC206-I/PT)
- Large I/O count on a small TQFP footprint (vsPIC24FJ1024GA606-E/MR)
Ghi chú thiết kế
The PIC24FJ1024GA606-E/PT requires a stable VDD rail with bulk decoupling of 10 uF + 0.1 uF placed within 5 mm of each VDD/VSS pin pair. The internal voltage regulator (ENVREG pin) must be enabled via configuration bits; if disabled, external 1.8V/2.5V/3.3V supply is required. For battery-powered designs, switch to Deep Sleep mode (typical current under 100 nA per datasheet) and use RTCC for wake events. Estimated: total quiescent current at 3.3V in Deep Sleep is in the low microamp range per Microchip PIC24FJ family datasheets.
Place a 0.1 uF ceramic decoupling capacitor as close as possible to every VDD/VSS pair, and add a single 10 uF bulk capacitor near the package. Keep the 32.768 kHz crystal traces short and symmetrical; route them away from switching lines. For USB designs, the D+/D- traces must be 90-ohm differential with matched length; place the 15 kohm pull-down on D- and the series 27-33 ohm termination resistors at the MCU end of each line.
A common pitfall when migrating from PIC24EP to PIC24FJ is forgetting that the PIC24FJ core runs at 32 MHz (16 MIPS) while PIC24EP runs at 70 MIPS - any timing-sensitive loops must be re-validated. The Live Update dual-partition Flash requires careful application design: the active partition must be fully self-contained (no cross-partition calls). Forgetting to enable the internal regulator via ENVREG configuration bit is a frequent bring-up issue that causes the MCU to appear completely dead.
The 64-TQFP package has thermal resistance (theta_JA) of approximately 40-50 C/W on a standard JEDEC 4-layer test board. At full 32 MHz operation across all peripherals, internal dissipation can reach 60-100 mW depending on peripheral activity, yielding a junction-to-ambient temperature rise of 5-10C. For +125C extended temperature applications, derate ambient by 10-15C to maintain junction within spec.
Thông tin tuân thủ
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - automotive designs should select AEC-Q100 successor parts. Halogen-free status not explicitly stated in provided data.
