AD524BDZ vs AD624BDZ So sánh
So sánh chi tiết song song của AD524BDZ bằng Analog Devices và AD624BDZ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Analog Devices
AD624BDZ - 25 MHz Low-Noise Instrumentation Amplifier | Analog Devices
AD624BDZ UnknownSo sánh thông số kỹ thuật
| Tham số | AD524BDZ | AD624BDZ |
|---|---|---|
| Thương hiệu | Analog Devices | Analog Devices |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Obsolete | Unknown |
| Number of Circuits | 1 circuit | — |
| Device Type | Precision monolithic instrumentation amplifier | — |
| Hộp | 16-lead ceramic DIP | 16-lead ceramic DIP |
| Pin-Programmable Gains | 1, 10, 100, and 1000 | — |
| Resistor-Programmable Gain | Any gain using one external resistor | — |
| Input Offset Nulling | Input nulling terminals provided | — |
| Output Offset Nulling | Output nulling terminals provided | — |
| Input Fault Protection | Protected during power-on and power-off conditions | — |
| S-Grade Temperature Range | -55°C to +125°C | — |
| AD524BDZ Temperature Range | [DATA_NEEDED: AD524BDZ operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | ±6 V to ±18 V |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Gain Error | [DATA_NEEDED: maximum gain error] | — |
| Gain Drift | [DATA_NEEDED: gain temperature coefficient] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 75 µV |
| Input Offset-Voltage Drift | [DATA_NEEDED: input offset-voltage drift] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: Common-mode rejection ratio] |
| Input Noise | [DATA_NEEDED: input noise density] | [DATA_NEEDED: Input noise density] |
| Maximum Output Voltage Swing | [DATA_NEEDED: maximum output voltage swing] | — |
| Điện áp tối đa đầu ra | [DATA_NEEDED: maximum output current] | — |
| Reference Input | [DATA_NEEDED: reference input configuration] | — |
| Kiểu lắp đặt | Through-hole ceramic DIP | Through-hole |
| Trạng thái RoHS | unknown | unknown |
| REACH Status | unknown | unknown |
| Product Type | — | Precision instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Gain-Bandwidth Product | — | 25 MHz |
| Slew Rate | — | 5 V/µs |
| Settling Time | — | 15 µs |
| Trimmed Gain Settings | — | 1, 100, 200, 500, and 1000 |
| External Gain-Setting Components | — | Not required for trimmed gains |
| Input Signal Type | — | Differential |
| Gain Accuracy | — | [DATA_NEEDED: Gain accuracy] |
| Khoảng điện áp đầu ra | — | [DATA_NEEDED: Output voltage range] |
| Khoảng nhiệt độ hoạt động | — | [DATA_NEEDED: Operating temperature range] |
| Automotive Qualification | — | not_applicable |