AD8015ARZ vs AD8018ARZ So sánh

So sánh chi tiết song song của AD8015ARZ bằng Analog Devices và AD8018ARZ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
AD8015ARZ AD8015ARZ - 240MHz Differential TIA | Analog Devices

AD8015ARZ - 240MHz Differential TIA | Analog Devices

AD8015ARZ ✓ Hoạt động
Analog Devices
AD8018ARZ AD8018ARZ - Dual 5V High-Speed xDSL Amplifier | ADI

AD8018ARZ - Dual 5V High-Speed xDSL Amplifier | ADI

AD8018ARZ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số AD8015ARZ AD8018ARZ
Thương hiệu Analog Devices Analog Devices
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Single-supply differential-output transimpedance amplifier —
Bandwidth 240 MHz —
Supported Data Rate Up to 155 Mbps —
Pulse Width 500 ps —
Thời gian tăng lên 1.5 ns —
Thời gian giảm dần 1.5 ns —
Cấu hình đầu ra Differential voltage —
Input Type Photodiode current input —
Supply Configuration Single supply —
Hộp 8-pin SOIC 8-pin SOIC
Kiểu lắp đặt Surface mount Surface mount
Primary Application Fiber-optic receiver xDSL customer-premises equipment
Optical Protocol Application FDDI receiver —
Telecommunications Application SONET/SDH receiver —
Supply Voltage Range [DATA_NEEDED: Supply Voltage Range] —
Input Transimpedance [DATA_NEEDED: Input Transimpedance] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: Operating Temperature Range] —
Trạng thái RoHS [DATA_NEEDED: RoHS Status] [DATA_NEEDED: RoHS compliance]
REACH Status [DATA_NEEDED: REACH Status] [DATA_NEEDED: REACH compliance]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 Qualification] [DATA_NEEDED: AEC-Q100 qualification]
Amplifier Type — Dual high-speed current-feedback operational amplifier
Number of Channels — 2 channels
Điện áp cung cấp — 5 V
Slew Rate — 300 V/µs
Common-Mode Rejection Ratio — 54 dB
Nhiệt độ hoạt động — -40°C to +85°C
Số lượng chân — 8 pins
Output Swing Limit — Within 0.5 V of the supply rail
Signal Type — xDSL line-drive signals
Nominal Supply Configuration — Single supply
Input Common-Mode Range — [DATA_NEEDED: input common-mode voltage range]
Unity-Gain Bandwidth — [DATA_NEEDED: unity-gain bandwidth]
Output Current Capability — [DATA_NEEDED: output current]
Input Offset Voltage — [DATA_NEEDED: input offset voltage]
Điện áp yên tĩnh — [DATA_NEEDED: quiescent current]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá