AD977ABR vs AD977CN So sánh

So sánh chi tiết song song của AD977ABR bằng Analog Devices và AD977CN bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
AD977ABR AD977ABR - 16-Bit 200kSPS Serial SAR ADC | 20-SOIC | ADI

AD977ABR - 16-Bit 200kSPS Serial SAR ADC | 20-SOIC | ADI

AD977ABR ✓ Hoạt động
Analog Devices
AD977CN AD977CN - 16-Bit 100 kSPS ADC | Analog Devices

AD977CN - 16-Bit 100 kSPS ADC | Analog Devices

AD977CN Obsolete

So sánh thông số kỹ thuật

Tham số AD977ABR AD977CN
Thương hiệu Analog Devices Analog Devices
Danh mục ADC/DAC ADC/DAC
Trạng thái vòng đời Hoạt động Obsolete
Độ phân giải 16 bit 16 bit
Architecture Successive Approximation (SAR) —
Number of Channels 1 —
Throughput Rate 200 kSPS 100 kSPS for AD977
Điện áp cung cấp +5 V single Single 5 V
Power Dissipation (max) 100 mW —
Power-Down Mode Current 50 µW (typical) —
Input Ranges (unipolar) 0 V to 5 V; 0 V to 4 V —
Input Ranges (bipolar) ±5 V; ±3.3 V —
Digital Interface Serial (SPI/QSPI/MICROWIRE-compatible) —
Aperture Delay 5 ns —
Track-and-Hold Bandwidth 2 MHz —
Hộp 20-pin SOIC (R-20), wide-body 20-pin DIP
Khoảng nhiệt độ hoạt động -40 °C to +85 °C (industrial) [DATA_NEEDED: operating temperature range]
Kiểu lắp đặt Surface Mount Through-hole
Lead-Free / RoHS Compliant —
Converter Type — Successive-approximation A/D converter
Family Comparison Throughput — 200 kSPS for AD977A
Input Range — Unipolar 5 V; unipolar 4 V; bipolar 5 V; bipolar 3.3 V
Power Dissipation — 100 mW maximum
Power-Down Mode — Supported
Số chân — 20 pins
Terminal Form — Through-hole
Temperature Grade — Industrial
Manufacturer — Analog Devices
Trạng thái vòng đời — Obsolete
Data Interface — [DATA_NEEDED: exact AD977CN output interface]
Input Type — [DATA_NEEDED: exact differential or single-ended input configuration]
Điện áp tham chiếu — [DATA_NEEDED: reference voltage]
SNR — [DATA_NEEDED: signal-to-noise ratio]
ENOB — [DATA_NEEDED: effective number of bits]
INL — [DATA_NEEDED: integral nonlinearity]
DNL — [DATA_NEEDED: differential nonlinearity]
Trạng thái RoHS — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Status — not_applicable

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá