AD977CN vs AD977AN So sánh

So sánh chi tiết song song của AD977CN bằng Analog Devices và AD977AN bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
AD977CN AD977CN - 16-Bit 100 kSPS ADC | Analog Devices

AD977CN - 16-Bit 100 kSPS ADC | Analog Devices

AD977CN Obsolete
Analog Devices
AD977AN AD977AN - 16-Bit 100 kSPS Serial SAR ADC | Analog Devices

AD977AN - 16-Bit 100 kSPS Serial SAR ADC | Analog Devices

AD977AN ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số AD977CN AD977AN
Thương hiệu Analog Devices Analog Devices
Danh mục ADC/DAC ADC/DAC
Trạng thái vòng đời Obsolete Hoạt động
Converter Type Successive-approximation A/D converter —
Độ phân giải 16 bit 16 bit
Throughput Rate 100 kSPS for AD977 —
Family Comparison Throughput 200 kSPS for AD977A —
Điện áp cung cấp Single 5 V 5 V
Input Range Unipolar 5 V; unipolar 4 V; bipolar 5 V; bipolar 3.3 V —
Power Dissipation 100 mW maximum —
Power-Down Mode Supported Supported
Hộp 20-pin DIP 20-pin PDIP
Kiểu lắp đặt Through-hole Through-hole
Số chân 20 pins —
Terminal Form Through-hole —
Temperature Grade Industrial —
Manufacturer Analog Devices —
Trạng thái vòng đời Obsolete —
Data Interface [DATA_NEEDED: exact AD977CN output interface] —
Input Type [DATA_NEEDED: exact differential or single-ended input configuration] —
Điện áp tham chiếu [DATA_NEEDED: reference voltage] —
SNR [DATA_NEEDED: signal-to-noise ratio] [DATA_NEEDED: signal-to-noise ratio]
ENOB [DATA_NEEDED: effective number of bits] [DATA_NEEDED: effective number of bits]
INL [DATA_NEEDED: integral nonlinearity] —
DNL [DATA_NEEDED: differential nonlinearity] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Status not_applicable —
Conversion Throughput — 100 kSPS
Analog Input Count — 1 input
Architecture — Successive-approximation switched-capacitor ADC
Process Technology — BiCMOS
Internal Reference — 2.5 V
Unipolar Input Range 1 — 0 V to 5 V
Unipolar Input Range 2 — 0 V to 4 V
Bipolar Input Range 1 — -5 V to +5 V
Bipolar Input Range 2 — -3.3 V to +3.3 V
Maximum Power Dissipation — 100 mW
Factory Calibration — Yes
Giao diện — High-speed serial interface
Analog Input Type — [DATA_NEEDED: analog input type]
Input Impedance — [DATA_NEEDED: input impedance]
THD — [DATA_NEEDED: total harmonic distortion]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá