ADM4850ARZ vs ADM483JR So sánh
So sánh chi tiết song song của ADM4850ARZ bằng Analog Devices và ADM483JR bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
So sánh thông số kỹ thuật
| Tham số | ADM4850ARZ | ADM483JR |
|---|---|---|
| Thương hiệu | Analog Devices | Analog Devices |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Differential line transceiver | Low-power differential line transceiver |
| Supported Standards | EIA RS-485 and RS-422 | — |
| Điện áp cung cấp | 5 V | 5 V |
| Maximum Data Rate | 115 kbps | — |
| Duplex Mode | Half-duplex | — |
| Signal Type | Balanced differential | — |
| Bus Architecture | Multipoint bus | — |
| Slew Rate | Limited | Limited for low EMI |
| Transmitter Count | 1 | — |
| Receiver Count | 1 | — |
| Hộp | 8-pin SOIC | 8-lead SOIC, 3.90 mm width |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Tube Quantity | 1 unit per tube | — |
| Reel Packaging | ADM4850ARZ-REEL7 | — |
| Datasheet Revision | Rev. F | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Điện áp cung cấp | [DATA_NEEDED: supply current] | — |
| Output Differential Voltage | [DATA_NEEDED: output differential voltage] | — |
| Receiver Differential Threshold | [DATA_NEEDED: receiver differential threshold] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Tốc độ dữ liệu | — | Up to 250 kbps |
| Communication Standard | — | EIA RS-485/RS-422 compliant |
| Operating Mode | — | Half-duplex |
| Typical Operating Supply Current | — | 120 µA |
| Shutdown Supply Current | — | 100 nA |
| Bus Common-Mode Range | — | -7 V to +12 V |
| Maximum Transceivers on One Bus | — | 32 transceivers |
| Output State When Disabled or Powered Off | — | High impedance |
| Protection | — | Thermal shutdown and short-circuit protection |
| Pin Compatibility | — | Pin-compatible with MAX483 |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |