ADM4855AR vs ADM4851ARZ So sánh

So sánh chi tiết song song của ADM4855AR bằng Analog Devices và ADM4851ARZ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
ADM4855AR ADM4855AR - 500 kbps RS-485/RS-422 Transceiver | Analog Devices

ADM4855AR - 500 kbps RS-485/RS-422 Transceiver | Analog Devices

ADM4855AR ✓ Hoạt động
Analog Devices
ADM4851ARZ ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices

ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices

ADM4851ARZ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số ADM4855AR ADM4851ARZ
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-485/RS-422 differential line transceiver RS-485/RS-422 differential line transceiver
Điện áp cung cấp 5 V 5 V
Maximum Data Rate 500 kbps 500 kbps
Duplex Support Half-duplex and full-duplex family options —
Bus Configuration Multipoint bus transmission lines —
Signal Type Balanced differential data transmission Balanced differential
Standards Compliance EIA RS-485 and RS-422 compliant —
EMI Feature Reduced slew rate for low EMI —
Receiver Safety True fail-safe receiver —
Hộp 8-lead SOIC 8-pin SOIC
Kiểu lắp đặt Surface mount Surface mount
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Điện áp cung cấp [DATA_NEEDED: typical and maximum supply current] [DATA_NEEDED: supply current]
Driver Output Current [DATA_NEEDED: output current capability] [DATA_NEEDED: driver output current]
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
Propagation Delay [DATA_NEEDED: driver and receiver propagation delays] —
Trạng thái RoHS [DATA_NEEDED: RoHS compliance statement] unknown
REACH Status [DATA_NEEDED: REACH compliance statement] unknown
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Duplex Mode — Half-duplex
Supported Standards — EIA RS-485 and EIA RS-422
Driver Configuration — 1/1 transceiver
Slew Rate — Limited
Receiver Common-Mode Voltage Range — [DATA_NEEDED: receiver common-mode voltage range]
Differential Input Sensitivity — [DATA_NEEDED: differential input sensitivity]
Điện áp tắt — [DATA_NEEDED: shutdown current]
Lead Pitch — [DATA_NEEDED: lead pitch]
AEC-Q100 Qualification — not_applicable

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá