ADM4856AR vs ADM4852AR So sánh

So sánh chi tiết song song của ADM4856AR bằng Analog Devices và ADM4852AR bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
ADM4856AR ADM4856AR - 2.5 Mbps RS-485/RS-422 Transceiver | Analog Devices

ADM4856AR - 2.5 Mbps RS-485/RS-422 Transceiver | Analog Devices

ADM4856AR ✓ Hoạt động
Analog Devices
ADM4852AR ADM4852AR - 2.5Mbps RS-485 Transceiver | Analog Devices

ADM4852AR - 2.5Mbps RS-485 Transceiver | Analog Devices

ADM4852AR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số ADM4856AR ADM4852AR
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-485/RS-422 differential line transceiver RS-485/RS-422 differential line transceiver
Điện áp cung cấp 5 V 5 V
Maximum Data Rate 2.5 Mbps 2.5 Mbps
Communication Modes Half-duplex and full-duplex Half-duplex and full-duplex
Standards EIA RS-485 and RS-422 compliant —
Slew Rate Reduced, slew-rate limited Limited
Receiver Safety True fail-safe receiver —
Hộp 8-pin SOIC 8-lead SOIC
Package Width 3.90 mm —
Kiểu lắp đặt Surface mount Surface mount
Temperature Grade Commercial and industrial temperature ranges —
Driver Architecture Differential line driver —
Receiver Architecture Differential line receiver —
Bus Application Multipoint bus transmission lines —
Logic Supply Level 5 V CMOS —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: minimum and maximum operating temperatures] [DATA_NEEDED: operating temperature range]
Maximum Supply Voltage [DATA_NEEDED: maximum supply voltage] —
Input and Output Current [DATA_NEEDED: input and output current ratings] —
Standards Compatibility — EIA RS-485 and RS-422
Fail-Safe Receiver — True fail-safe
Bus Topology — Multipoint bus transmission lines
Số lượng chân — 8 pins
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Differential Threshold — [DATA_NEEDED: receiver differential threshold]
Propagation Delay — [DATA_NEEDED: propagation delay]
Điện áp yên tĩnh — [DATA_NEEDED: quiescent current]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá