ADM485JR vs ADM485ARZ So sánh
So sánh chi tiết song song của ADM485JR bằng Analog Devices và ADM485ARZ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | ADM485JR | ADM485ARZ |
|---|---|---|
| Thương hiệu | Analog Devices | Analog Devices |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Low-power differential line transceiver | — |
| Điện áp cung cấp | 5 V | 5 V (single supply) |
| Maximum Data Rate | 5 Mbit/s | — |
| Communication Standards | EIA RS-485 and EIA RS-422 | — |
| Driver Configuration | Differential line driver | — |
| Receiver Configuration | Differential line receiver | — |
| Enable Control | Independent driver and receiver enables | — |
| Bus Mode | Multipoint, full-duplex, or half-duplex communication | — |
| Hộp | 8-pin SOIC | SOIC-8 (SO-8) / SO-8 |
| Package Family | 8-pin DIL or SOIC | — |
| Kiểu lắp đặt | Surface mount | Surface Mount |
| Temperature Qualification | Commercial and industrial temperature ranges | — |
| Power Class | Low power | — |
| EMI Characteristic | Low channel skew | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | Unaffected |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Tốc độ dữ liệu | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| Khoảng nhiệt độ hoạt động | — | -40 C to +85 C |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| Cấp MSL | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |