BSP742R vs BSP752RXUMA2 So sánh

So sánh chi tiết song song của BSP742R bằng Infineon và BSP752RXUMA2 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BSP742R BSP742R - 1.5A Smart High-Side Switch | Infineon PROFET

BSP742R - 1.5A Smart High-Side Switch | Infineon PROFET

BSP742R ✓ Hoạt động
Infineon
BSP752RXUMA2 BSP752RXUMA2 - 1.3A Smart High-Side Power Switch | Infineon

BSP752RXUMA2 - 1.3A Smart High-Side Power Switch | Infineon

BSP752RXUMA2 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BSP742R BSP752RXUMA2
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Family Classic PROFET 12V —
Chức năng Smart High-Side Power Switch —
Number of Channels 1 —
RDS(on) (typical) 70 mΩ —
Nominal Load Current 1.5 A —
Supply Voltage (Vbb) 5.5 V to 34 V —
Load Dump Tolerance up to 40 V —
On-state Resistance Max [DATA_NEEDED: RDS(on) max at TJ=25C] —
Nhiệt độ hoạt động -40C to +150C (TJ) —
Input Type CMOS-compatible, ground-referenced —
Diagnostic Output Open-drain status flag —
Protection Functions Overload, short-circuit, thermal shutdown with restart, overvoltage, reverse battery, fast demagnetization —
Hộp PG-DSO-8 (DSO-8) PG-DSO-8-6 (DSO-8-6)
Kiểu lắp đặt Surface Mount Surface Mount
Technology Smart SIPMOS (monolithic) —
Trạng thái RoHS Compliant Compliant
Automotive Qualified Yes (per Infineon product page) —
Product Type — Smart High-Side Power Switch
Cấu trúc — High-side, 1:1 N-channel
Continuous Load Current — 1.3 A
On-State Resistance (RON) — [DATA_NEEDED: typical RON value in ohms at 25C]
Supply Voltage Range (Vbb) — [DATA_NEEDED: Vbb min/max operating range]
Load Dump Protection — Yes (integrated)
Overload Protection — Yes (current limitation)
Short Circuit Protection — Yes
Tắt nhiệt — Yes (with auto-restart)
Reverse Battery Protection — Yes
Open-Load Detection (OFF state) — Yes (via external resistor)
Status Feedback Pin — Yes
Fast Demagnetization — Yes (for inductive loads)
Khoảng nhiệt độ hoạt động — -40C to +150C (junction)
Qualification — AEC-Q100 (automotive grade)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá