BSP742RIXUMA1 vs BTS4142NHUMA1 So sánh

So sánh chi tiết song song của BSP742RIXUMA1 bằng Infineon và BTS4142NHUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BSP742RIXUMA1 BSP742RIXUMA1 - 400mA Smart High-Side Switch 41V | Infineon

BSP742RIXUMA1 - 400mA Smart High-Side Switch 41V | Infineon

BSP742RIXUMA1 ✓ Hoạt động
Infineon
BTS4142NHUMA1 BTS4142NHUMA1 - 1.4A 24V Smart High-Side Switch | Infineon

BTS4142NHUMA1 - 1.4A 24V Smart High-Side Switch | Infineon

BTS4142NHUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BSP742RIXUMA1 BTS4142NHUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Smart High-Side Power Switch Smart High-Side Power Switch (Classic PROFET 24V)
Cấu trúc 1:1 N-Channel High-Side —
Family miniPROFET —
Output Current (Nominal) 400 mA —
RDS(on) Typical at 25°C 250 mΩ —
Điện áp cung cấp hoạt động 5 V to 34 V 6 V to 42 V
Load Dump Tolerance 41 V —
Reverse Battery Protection -16 V —
On-State Resistance (max) [DATA_NEEDED: RDS(on) maximum at 25°C] —
Giới hạn dòng điện [DATA_NEEDED: current limit typical value] —
Tắt nhiệt Yes with auto restart —
Overvoltage Protection Yes (including load dump) —
Short Circuit Protection Yes —
Open Load Detection Yes (diagnostic pin) —
Demagnetization of Inductive Loads Yes (internal) —
Hộp PG-DSO-8-6 (SOIC-8, 3.90 mm body) PG-SOT223-4
Kiểu lắp đặt Surface Mount Surface Mount
Khoảng nhiệt độ hoạt động -40 °C to +150 °C —
Cấp MSL [DATA_NEEDED: MSL rating] —
Trạng thái RoHS Compliant Compliant
Number of Channels — 1
Switch Topology — High-side, N-channel vertical MOSFET
Nominal Output Current — 1.4 A
On-State Resistance (RDS(on)) — 70 mOhm (typical)
Load-Dump Protection — Yes (integrated overvoltage clamp)
Overload Protection — Yes (current limiting)
Thermal Protection — Yes (shutdown with auto-restart)
Undervoltage Shutdown — Yes (auto-restart with hysteresis)
ESD Protection (Input Pin) — Yes
Diagnostic Feedback — Yes (open-load, fault)
Nhiệt độ hoạt động — -40C to +150C (junction)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá