BTS118DATMA1 vs BTS134DATMA1 So sánh

So sánh chi tiết song song của BTS118DATMA1 bằng Infineon và BTS134DATMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS118DATMA1 BTS118DATMA1 - 42V 2.4A Smart Low-Side Switch | Infineon

BTS118DATMA1 - 42V 2.4A Smart Low-Side Switch | Infineon

BTS118DATMA1 ✓ Hoạt động
Infineon
BTS134DATMA1 BTS134DATMA1 - 42V 3.5A Smart Low-Side Power Switch | Infineon

BTS134DATMA1 - 42V 3.5A Smart Low-Side Power Switch | Infineon

BTS134DATMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS118DATMA1 BTS134DATMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Part Number BTS118DATMA1 —
Manufacturer Infineon Technologies Infineon Technologies
Product Family Smart SIPMOS Low-Side Power Switch —
Cấu trúc 1:1 N-Channel Smart Low-Side Switch —
Load Supply Voltage (Vbb max) 42 V —
Continuous Drain Current 2.4 A —
On-State Resistance (RDS(on)) [DATA_NEEDED: RDS(on) typical @ 25C] [DATA_NEEDED: RDS(on) at VGS=5V, TJ=25C]
Input Logic Level CMOS / TTL compatible —
Input Protection ESD protected —
Thermal Protection Thermal shutdown with auto-restart —
Overload Protection Yes Yes
Short-Circuit Protection Yes Yes
Overvoltage Protection Yes (Vbb transient) —
Current Limitation Yes Yes
Status Feedback Open-drain diagnostic output (shared with IN) —
Hộp PG-TO252-3-11 (DPAK) PG-TO252-3-11 (DPAK, 2 leads + tab, SC-63)
Kiểu lắp đặt Surface Mount Surface Mount
Khoảng nhiệt độ hoạt động -40C to +150C (junction) [DATA_NEEDED: TJ min/max -40C to +150C is typical for HITFET]
RoHS / REACH Green product, RoHS compliant, lead-free —
Cấp MSL MSL 3 (per JEDEC J-STD-020) [DATA_NEEDED: MSL rating]
Product Series — HITFET (BTS134)
Switch Type — N-Channel Low-Side Smart Power Switch
Technology — Smart SIPMOS (vertical DMOS + protection IC)
Input Type — Logic Level
Number of Channels — 1
Cấu hình đầu ra — Low-Side
Continuous Drain Current (ID) — 3.5 A
Operating Voltage (VLoad) — 42 V (max)
Drain-Source Voltage (VDS) — 42 V
Input Logic Threshold (VIH/VIL) — Logic-level (3.3 V / 5 V compatible GPIO)
ESD Protection (Input Pin) — Yes (embedded)
Tắt nhiệt — Yes (auto-restart)
Overvoltage Protection (Load Dump) — Yes
Automotive Qualification — AEC-Q100 (per Arrow listing)
Trạng thái RoHS — Compliant (Green product)
Packing — Tape & Reel (T&R)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá