BTS4142NHUMA1 vs BSP742RIXUMA1 So sánh

So sánh chi tiết song song của BTS4142NHUMA1 bằng Infineon và BSP742RIXUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS4142NHUMA1 BTS4142NHUMA1 - 1.4A 24V Smart High-Side Switch | Infineon

BTS4142NHUMA1 - 1.4A 24V Smart High-Side Switch | Infineon

BTS4142NHUMA1 ✓ Hoạt động
Infineon
BSP742RIXUMA1 BSP742RIXUMA1 - 400mA Smart High-Side Switch 41V | Infineon

BSP742RIXUMA1 - 400mA Smart High-Side Switch 41V | Infineon

BSP742RIXUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS4142NHUMA1 BSP742RIXUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Smart High-Side Power Switch (Classic PROFET 24V) Smart High-Side Power Switch
Number of Channels 1 —
Switch Topology High-side, N-channel vertical MOSFET —
Nominal Output Current 1.4 A —
On-State Resistance (RDS(on)) 70 mOhm (typical) —
Điện áp cung cấp hoạt động 6 V to 42 V 5 V to 34 V
Load-Dump Protection Yes (integrated overvoltage clamp) —
Overload Protection Yes (current limiting) —
Thermal Protection Yes (shutdown with auto-restart) —
Undervoltage Shutdown Yes (auto-restart with hysteresis) —
ESD Protection (Input Pin) Yes —
Diagnostic Feedback Yes (open-load, fault) —
Hộp PG-SOT223-4 PG-DSO-8-6 (SOIC-8, 3.90 mm body)
Kiểu lắp đặt Surface Mount Surface Mount
Nhiệt độ hoạt động -40C to +150C (junction) —
Trạng thái RoHS Compliant Compliant
Cấu trúc — 1:1 N-Channel High-Side
Family — miniPROFET
Output Current (Nominal) — 400 mA
RDS(on) Typical at 25°C — 250 mΩ
Load Dump Tolerance — 41 V
Reverse Battery Protection — -16 V
On-State Resistance (max) — [DATA_NEEDED: RDS(on) maximum at 25°C]
Giới hạn dòng điện — [DATA_NEEDED: current limit typical value]
Tắt nhiệt — Yes with auto restart
Overvoltage Protection — Yes (including load dump)
Short Circuit Protection — Yes
Open Load Detection — Yes (diagnostic pin)
Demagnetization of Inductive Loads — Yes (internal)
Khoảng nhiệt độ hoạt động — -40 °C to +150 °C
Cấp MSL — [DATA_NEEDED: MSL rating]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá