BTS428L2ATMA1 vs ITS724GFUMA1 So sánh

So sánh chi tiết song song của BTS428L2ATMA1 bằng Infineon và ITS724GFUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS428L2ATMA1 BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 ✓ Hoạt động
Infineon
ITS724GFUMA1 ITS724GFUMA1 - 4-Ch 3A Smart High-Side Switch | Infineon

ITS724GFUMA1 - 4-Ch 3A Smart High-Side Switch | Infineon

ITS724GFUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS428L2ATMA1 ITS724GFUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Smart High-Side Power Switch —
Technology Smart SIPMOS (vertical N-channel MOSFET with charge pump) Smart SIPMOS (vertical MOSFET with charge pump)
Number of Channels 1 4
Input Type CMOS-compatible, ground-referenced —
On-State Resistance (R_DS(on)) 50 mOhm (typical) —
Continuous Load Current 5.8 A —
Điện áp cung cấp hoạt động [DATA_NEEDED: nominal and range] —
Standby Current Very low (per datasheet) —
Overvoltage Protection Load-dump / overvoltage clamp —
Overtemperature Protection Yes, with autorestart —
Diagnostic Feedback Yes (open-load, short-circuit, overtemperature) —
Hộp PG-TO252-5-11 (DPAK-5, 4 leads + tab) PG-DSO-20-32
Kiểu lắp đặt Surface Mount Surface Mount
Khoảng nhiệt độ hoạt động [DATA_NEEDED: min/max] -40 C to +85 C (industrial)
RoHS / Pb-Free Yes (Green product, Pb-free finish, J-STD-020) —
Soldering Pb-free reflow per IPC/JEDEC J-STD-020 —
Qualification Automotive-grade (PROFET family) —
Manufacturer — Infineon Technologies
Part Series — ITS724G / PROFET Industrial
Chức năng — 4-Channel Smart High-Side Power Switch
Cấu trúc — High-Side N-Channel MOSFET with charge pump
Continuous Output Current per Channel — 3.3 A
On-State Resistance (typ) — 65 mΩ per channel
Supply Voltage Range (Vbb) — -10 V to 16 V
Load Dump Protection — External resistor required
Input Compatibility — CMOS-compatible, ground-referenced
Diagnostic Output — Open-drain status flag
Trạng thái RoHS — Compliant

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá