BTS52004EKAXUMA1 vs BTG7003A1EPWXUMA2 So sánh

So sánh chi tiết song song của BTS52004EKAXUMA1 bằng Infineon và BTG7003A1EPWXUMA2 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS52004EKAXUMA1 BTS52004EKAXUMA1 - 200mΩ Quad Smart High-Side Switch | Infineon

BTS52004EKAXUMA1 - 200mΩ Quad Smart High-Side Switch | Infineon

BTS52004EKAXUMA1 ✓ Hoạt động
Infineon
BTG7003A1EPWXUMA2 BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon

BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon

BTG7003A1EPWXUMA2 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS52004EKAXUMA1 BTG7003A1EPWXUMA2
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Quad Smart High-Side Power Switch —
Cấu trúc High-Side, 1:1 N-Channel MOSFET with charge pump —
Number of Channels 4 1
On-Resistance (Ron, typ) 200 mΩ per channel —
Continuous Load Current per Channel 800 mA —
Operating Voltage Range (Vbb) 5 V to 38 V —
Load Dump Tolerance Up to 38 V 40 V
Standby Current [DATA_NEEDED: typical Ibb(off)] —
Quiescent Current (active) [DATA_NEEDED: Ibb(on) typ] —
PWM Frequency (max) 1 kHz —
Protection Features Short-circuit, overload, overtemperature, overvoltage, open-load detection —
Diagnostic Output IS pin (proportional load current sense) —
Khoảng nhiệt độ hoạt động -40 °C to +150 °C junction —
Hộp PG-DSO-14-48-EP (DSO-14 with Exposed Pad) PG-TSDSO-14-22 (exposed pad)
Kiểu lắp đặt Surface Mount Surface Mount
Technology Infineon Smart6 —
Cấp MSL 3 (per JEDEC J-STD-020) —
Trạng thái RoHS Compliant Compliant
Switch Type — High-Side Power Switch
Configuration — 1:1 N-Channel
Maximum Continuous Load Current — 15.7 A
Operating Voltage Range — 6 V to 18 V
Idle Mode Quiescent Current — 50 µA
On-Resistance R_DS(on) — 10 mΩ (typ)
Control Input — Active High
Wire Protection — Integrated I²t
Functional Safety — ISO 26262 compliant
Nhiệt độ hoạt động — -40C to +150C (TJ)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá