BTS724GXUMA1 vs BTS3110NHUMA1 So sánh

So sánh chi tiết song song của BTS724GXUMA1 bằng Infineon và BTS3110NHUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS724GXUMA1 BTS724GXUMA1 - 4-Ch High-Side Smart Power Switch 3A | Infineon

BTS724GXUMA1 - 4-Ch High-Side Smart Power Switch 3A | Infineon

BTS724GXUMA1 ✓ Hoạt động
Infineon
BTS3110NHUMA1 BTS3110NHUMA1 - 42V 1.4A Smart Low-Side Switch | Infineon

BTS3110NHUMA1 - 42V 1.4A Smart Low-Side Switch | Infineon

BTS3110NHUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS724GXUMA1 BTS3110NHUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Cấu trúc 4-channel high-side switch —
Số lượng đầu ra 4 —
Cấu hình đầu ra High-side —
On-Resistance (RDS(on)) per Channel 200 mOhm typical at 25 C —
Continuous Load Current per Channel 3 A —
Supply Voltage (Vbb) 5.5 V to 38 V —
Operating Supply Voltage Range 5.5 V to 38 V —
Overvoltage Clamp (Vbb(AZ)) Data needed - see datasheet —
Standby Current 8 mA typical (per datasheet family) —
Input Type CMOS-compatible, ground-referenced —
Diagnostic Output Yes - per-channel status flag —
Protection Features Overload, short-circuit, over-temperature, over-voltage ESD, thermal shutdown, over-load current limit
Demagnetization Fast demagnetization for inductive loads —
Khoảng nhiệt độ hoạt động -40 C to +150 C junction -40 C to +150 C
Hộp PG-DSO-20 (20-pin, exposed thermal considerations) PG-SOT223-4 (SOT-223-4)
Kiểu lắp đặt Surface Mount Surface Mount
Cấp MSL 3 [DATA_NEEDED: MSL level]
Trạng thái RoHS Compliant Compliant
Technology Infineon Smart SIPMOS (vertical power MOSFET + charge pump) —
Family Classic PROFET 24V automotive smart high-side switch Classic HITFET
Product Type — Smart Low-Side Power Switch
Number of Channels — 1
Switch Type — N-Channel (1:1)
Maximum Drain-to-Source Voltage (VDS max) — 42 V
Continuous Drain Current — 1.4 A
On-Resistance (RDS(on) typ) — 200 mOhm
Input Logic Compatibility — TTL / CMOS (3.3 V and 5 V)
On-State Input Voltage (VIH) — [DATA_NEEDED: VIH value]
Off-State Input Voltage (VIL) — [DATA_NEEDED: VIL value]
Status Flag Output — Open-drain diagnostic output
Automotive Qualified — Yes - 12 V automotive applications

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá