CD4017BE vs CD4017AK So sánh
So sánh chi tiết song song của CD4017BE bằng Texas Instruments và CD4017AK bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
CD4017BE - CMOS Decade Counter/Divider, 16-PDIP | Texas Instruments
CD4017BE ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | CD4017BE | CD4017AK |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Logic ICs | Logic ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Chức năng | Counter, Decade (divide-by-10) with 10 decoded outputs | — |
| Logic Family | CMOS 4000B series | — |
| Number of Elements | 1 | — |
| Number of Bits per Element | 10 | — |
| Count Direction | Up | — |
| Trigger Type | Positive edge | — |
| Supply Voltage (VDD) | 3 V to 18 V | — |
| Typical Clock Frequency | 10 MHz (typ) at VDD = 10 V | — |
| Điện áp yên tĩnh | 100% tested at 20 V (per datasheet) | [DATA_NEEDED: quiescent current] |
| Number of Decoded Outputs | 10 (Q0 through Q9) | — |
| Carry Out (CO) Signal | Yes - for cascading | — |
| Master Reset | Yes (active-high) | — |
| Clock Enable | Yes (active-low enable) | — |
| Nhiệt độ hoạt động | -55C to +125C | — |
| Hộp | 16-Pin PDIP (N) | 16-CFP |
| Kiểu lắp đặt | Through-hole | Surface mount |
| Trạng thái RoHS | Compliant (TI product) | [DATA_NEEDED: RoHS status] |
| JEDEC Standard | Meets JEDEC Tentative Standard No. 13A (per datasheet reference) | — |
| Product Type | — | CMOS decade counter and divider |
| Supply Voltage Range | — | 3 V to 12 V |
| Counter Configuration | — | 1 element, 10 bit |
| Counting Sequence | — | Decade, 0 through 9 |
| Clock Edge | — | Falling edge |
| Logic Levels | — | Positive and negative |
| Decoded Outputs | — | 10 outputs |
| Cascade Outputs | — | 1 carry output |
| Tần số xung maksimum | — | [DATA_NEEDED: maximum clock frequency] |
| Khoảng nhiệt độ hoạt động | — | [DATA_NEEDED: operating temperature range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Input Current | — | [DATA_NEEDED: input current] |
| Output Current | — | [DATA_NEEDED: output current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |