CY7C65213-32LTXI vs CY7C65213-28PVXI So sánh

So sánh chi tiết song song của CY7C65213-32LTXI bằng Infineon và CY7C65213-28PVXI bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
CY7C65213-32LTXI CY7C65213-32LTXI USB-UART Bridge 32-QFN | Infineon

CY7C65213-32LTXI USB-UART Bridge 32-QFN | Infineon

CY7C65213-32LTXI ✓ Hoạt động
Infineon
CY7C65213-28PVXI CY7C65213-28PVXI - USB-UART LP Bridge Controller 28-SSOP | Infineon

CY7C65213-28PVXI - USB-UART LP Bridge Controller 28-SSOP | Infineon

CY7C65213-28PVXI ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số CY7C65213-32LTXI CY7C65213-28PVXI
Thương hiệu Infineon Infineon
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type USB-to-UART bridge controller USB-to-UART Bridge Controller
USB Standard USB 2.0 Full-Speed —
UART Maximum Data Rate 3 Mbps —
GPIO Count 8 GPIOs —
Serial Interface Support RS232/RS422 —
Hộp 32-QFN 28-pin SSOP
Package Dimensions 5 mm × 5 mm —
Kiểu lắp đặt Surface mount Surface Mount
USB Suspend Support SLEEP# asserted during USB suspend —
Power Architecture Fully integrated USB-to-UART bridge —
Legacy UART Upgrade Supports upgrading UART-based devices to USB —
Operating Voltage [DATA_NEEDED: operating voltage] 5.0 V (VBUS-powered)
Nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
UART Electrical Levels [DATA_NEEDED: UART logic levels] —
Clock or Crystal Requirement [DATA_NEEDED: clock or crystal requirement] —
USB Bus-Powered Suspend Current [DATA_NEEDED: suspend current] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
USB Specification — USB 2.0 Full-Speed (12 Mbps)
UART Data Rate — Up to 3 Mbps
UART Interface — 7 or 8 data bits, hardware and software flow control (RTS/CTS, XON/XOFF)
Internal Flash — 512 bytes (for VID/PID and descriptors)
Internal Regulator — Integrated 3.3V LDO
Internal Oscillator — Yes (no external crystal required)
GPIO Pins — Available (multi-function)
Khoảng nhiệt độ hoạt động — -40C to +85C (industrial)
Suspend Current — [DATA_NEEDED: suspend current]
ESD Protection — [DATA_NEEDED: ESD rating (kV)]
MSL (Moisture Sensitivity Level) — [DATA_NEEDED: MSL level]
Manufacturer — Infineon Technologies (formerly Cypress Semiconductor)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá