DP83867CRRGZT vs DP83867CSRGZR So sánh

So sánh chi tiết song song của DP83867CRRGZT bằng Texas Instruments và DP83867CSRGZR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
DP83867CRRGZT DP83867CRRGZT - Gigabit Ethernet PHY | Texas Instruments

DP83867CRRGZT - Gigabit Ethernet PHY | Texas Instruments

DP83867CRRGZT ✓ Hoạt động
Texas Instruments
DP83867CSRGZR DP83867CSRGZR - Gigabit Ethernet PHY RGMII/SGMII | Texas Instruments

DP83867CSRGZR - Gigabit Ethernet PHY RGMII/SGMII | Texas Instruments

DP83867CSRGZR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số DP83867CRRGZT DP83867CSRGZR
Thương hiệu Texas Instruments Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type 10/100/1000 Base-TX Ethernet physical-layer controller Ethernet Physical Layer Transceiver (PHY)
Supported Ethernet Rates 10 Mbps, 100 Mbps, and 1 Gbps —
Supported Physical Layer Modes 10BASE-T, 100BASE-TX, and 1000BASE-T —
Host Interface RGMII and SGMII —
Number of Ports 1 Ethernet port —
Supply Voltage Options 1.8 V, 2.5 V, and 3.3 V —
Hộp 48-pin VQFN (RGZ), 7 mm x 7 mm 48-VQFN (RGZ) 7x7 mm
Kiểu lắp đặt Surface mount Surface Mount
Khoảng nhiệt độ hoạt động 0 °C to 70 °C —
Cable Diagnostics Supported Yes (built-in)
IEEE 1588 Support Start-of-frame support —
Debug Interface JTAG 1149.1 —
ESD Protection Exceeds 8 kV IEC 61000-4-2 for direct contact > 8 kV IEC 61000-4-2 (direct contact)
Power Class Low-power Gigabit Ethernet PHY transceiver —
Trạng thái RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Tốc độ dữ liệu — 10/100/1000 Mbps
Ethernet Standards — 10BASE-Te, 100BASE-TX, 1000BASE-T
MAC Interface — RGMII, SGMII
Số chân — 48
Điện áp cung cấp — [DATA_NEEDED: core supply voltage range]
I/O Voltage — 3.3 V, 2.5 V, or 1.8 V (configurable)
Nhiệt độ hoạt động — 0 C to 70 C (commercial)
RGMII Latency (TX) — < 90 ns
RGMII Latency (RX) — < 290 ns
Typical Power Consumption — 457 mW
JTAG Support — Yes (boundary scan)
TSN Compliance — Yes (Time Sensitive Network)
Lead-Free / RoHS — Yes (compliant per TI product page)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá