DP83TC811RWRNDTQ1 vs DP83TC811SWRNDTQ1 So sánh
So sánh chi tiết song song của DP83TC811RWRNDTQ1 bằng Texas Instruments và DP83TC811SWRNDTQ1 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
DP83TC811RWRNDTQ1 - 100BASE-T1 Automotive PHY | Texas Instruments
DP83TC811RWRNDTQ1 ✓ Hoạt độngTexas Instruments
DP83TC811SWRNDTQ1 - Automotive 100BASE-T1 Ethernet PHY | TI
DP83TC811SWRNDTQ1 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | DP83TC811RWRNDTQ1 | DP83TC811SWRNDTQ1 |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Automotive Ethernet physical-layer transceiver | Automotive 100BASE-T1 Ethernet PHY transceiver |
| Ethernet Standard | IEEE 802.3bw | — |
| Tốc độ dữ liệu | 100BASE-T1 | 100 Mbps (100BASE-T1) |
| Cable Type | Unshielded single twisted-pair cable | Unshielded single twisted pair |
| MAC Interface Support | MII, RMII, and RGMII | MII, RMII, RGMII, SGMII |
| Power Class | Low-power | — |
| Automotive Series | DP83TC811R-Q1 | — |
| Package Type | 36-pin VQFN wettable-flank package | — |
| Package Dimensions | 6.00 mm x 6.00 mm | — |
| Số chân | 36 pins | — |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Diagnostic Support | Diagnostic Tool Kit | Diagnostic Tool Kit |
| Test Pattern | Pseudo-random binary sequence frame generation | — |
| Loopback Support | Internal loopback compatible | — |
| Operating Voltage | [DATA_NEEDED: operating voltage] | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Maximum Data Rate | [DATA_NEEDED: maximum supported data rate] | — |
| Điện áp cung cấp | [DATA_NEEDED: typical and maximum supply current] | — |
| Differential Pair Impedance | [DATA_NEEDED: differential pair impedance] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Status | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Compliance | — | IEEE 802.3bw |
| Automotive Qualification | — | Automotive Grade 1 |
| Power Technology | — | PHYTER power-saving technology |
| Test Support | — | PRBS frame generation compatible with internal loopbacks |
| Hộp | — | 36-pin VQFN wettable flank, 6.00 mm x 6.00 mm |
| Supply Voltage Options | — | 1.8 V, 2.5 V, 3.3 V |
| Transceiver Configuration | — | Full, half |
| Number of Channels | — | 1 channel |
| MAC Interface | — | xMII |
| AEC-Q100 Grade | — | Grade 1 |