EFM32ZG222F32-QFP48 vs EFM32G222F32G-E-QFP48 So sánh

So sánh chi tiết song song của EFM32ZG222F32-QFP48 bằng Silicon Labs và EFM32G222F32G-E-QFP48 bằng Silicon Labs. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Silicon Labs
EFM32ZG222F32-QFP48 EFM32ZG222F32-QFP48 - 24 MHz Cortex-M0+ 32KB MCU | Silicon Labs

EFM32ZG222F32-QFP48 - 24 MHz Cortex-M0+ 32KB MCU | Silicon Labs

EFM32ZG222F32-QFP48 ✓ Hoạt động
Silicon Labs
EFM32G222F32G-E-QFP48 EFM32G222F32G-E-QFP48 - 32MHz ARM MCU | Silicon Labs

EFM32G222F32G-E-QFP48 - 32MHz ARM MCU | Silicon Labs

EFM32G222F32G-E-QFP48 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số EFM32ZG222F32-QFP48 EFM32G222F32G-E-QFP48
Thương hiệu Silicon Labs Silicon Labs
Danh mục Microcontrollers Microcontrollers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type 32-bit ARM Cortex-M0+ microcontroller 32-bit ARM Cortex-M3 microcontroller
Series EFM32 Zero Gecko —
Maximum CPU Frequency 24 MHz 32 MHz
Flash Memory 32 kB 32 KB (32K x 8 bits)
RAM 4 kB 8 KB
Digital I/O Pins 37 37 pins
Timers 2 x 16-bit timers —
Supply Voltage Range 1.98 V to 3.8 V [DATA_NEEDED: operating supply voltage range]
Stop Mode Current 0.5 uA —
Run Mode Current 114 uA/MHz —
Processor Core ARM Cortex-M0+ —
Architecture 32-bit —
Hộp 48-TQFP (7 x 7 mm) 48-TQFP, 7 mm x 7 mm
Kiểu lắp đặt Surface Mount Surface mount
Số lượng chân 48 —
Autonomous Peripherals Supported —
Power-Saving Modes Stop mode —
Fast Wake-Up Supported —
ADC Present —
AES Present —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
Timer Count — 3 timers
Timer Resolution — 16 bits per timer
Processor Architecture — ARM Cortex-M3, 32-bit
Device Family — EFM32 Gecko
Số chân — 48 pins
GPIO Electrical Configuration — [DATA_NEEDED: GPIO voltage and current ratings]
Communication Interfaces — [DATA_NEEDED: UART, SPI, I2C, and USB interface inventory]
Analog Peripherals — [DATA_NEEDED: ADC, DAC, and comparator inventory]
Low-Power Modes — [DATA_NEEDED: named low-power modes and current consumption]
Wake-Up Time — [DATA_NEEDED: specified wake-up time]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá