INA131BP vs INA114AU So sánh

So sánh chi tiết song song của INA131BP bằng Texas Instruments và INA114AU bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
INA131BP INA131BP - G=100 Instrumentation Amplifier | Texas Instruments

INA131BP - G=100 Instrumentation Amplifier | Texas Instruments

INA131BP ✓ Hoạt động
Texas Instruments
INA114AU INA114AU - 1MHz Precision INA Amplifier | Texas Instruments

INA114AU - 1MHz Precision INA Amplifier | Texas Instruments

INA114AU ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số INA131BP INA114AU
Thương hiệu Texas Instruments Texas Instruments
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Amplifier Type Precision instrumentation amplifier Single-amplifier precision instrumentation amplifier
Internal Amplifier Count 3 amplifiers —
Nominal Gain 100 V/V —
Gain Configuration Fixed gain —
Supply Voltage Range 2.25 V to 18 V —
Maximum Total Supply Voltage 50 V —
Signal Bandwidth 70 kHz —
Slew Rate 0.7 V/µs 0.06 V/µs
Adjustment Method On-chip laser trimming —
Number of Circuits 1 circuit —
Package Type 8-pin PDIP —
Số lượng chân 8 pins —
Kiểu lắp đặt Through-hole —
Temperature Grade Industrial grade —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] -40°C to +85°C
Input Offset Voltage [DATA_NEEDED: input offset voltage] —
Input Bias Current [DATA_NEEDED: input bias current] —
Common-Mode Rejection Ratio [DATA_NEEDED: common-mode rejection ratio] —
Power Supply Rejection Ratio [DATA_NEEDED: power supply rejection ratio] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Quiescent Current per Channel [DATA_NEEDED: quiescent current per channel] —
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range] —
Gain-Bandwidth Product — 1 MHz
Input Noise — 11 nV/√Hz
Maximum Offset Voltage — 50 µV
Maximum Offset Voltage Drift — 0.25 µV/°C
Maximum Input Bias Current — 2 nA
Minimum Common-Mode Rejection — 115 dB
Input Overvoltage Protection — ±40 V
Maximum Supply Voltage — ±18 V
Minimum Supply Voltage — ±2.25 V
Maximum Quiescent Current — 3 mA
Gain Range — 1 to 10,000
Hộp — 16-pin SOIC, 3.9 mm wide
Kiểu lắp đặt — Surface mount
Internal Architecture — Three-op-amp instrumentation amplifier
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá