INA131BP vs INA131AP-1 So sánh
So sánh chi tiết song song của INA131BP bằng Texas Instruments và INA131AP-1 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
INA131BP - G=100 Instrumentation Amplifier | Texas Instruments
INA131BP ✓ Hoạt độngTexas Instruments
INA131AP-1 - Precision Gain-100 Instrumentation Amplifier | TI
INA131AP-1 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | INA131BP | INA131AP-1 |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Amplifier Type | Precision instrumentation amplifier | — |
| Internal Amplifier Count | 3 amplifiers | — |
| Nominal Gain | 100 V/V | — |
| Gain Configuration | Fixed gain | — |
| Supply Voltage Range | 2.25 V to 18 V | — |
| Maximum Total Supply Voltage | 50 V | — |
| Signal Bandwidth | 70 kHz | — |
| Slew Rate | 0.7 V/µs | — |
| Adjustment Method | On-chip laser trimming | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Package Type | 8-pin PDIP | — |
| Số lượng chân | 8 pins | — |
| Kiểu lắp đặt | Through-hole | — |
| Temperature Grade | Industrial grade | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 50 uV maximum |
| Input Bias Current | [DATA_NEEDED: input bias current] | 2 nA maximum |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 110 dB minimum |
| Power Supply Rejection Ratio | [DATA_NEEDED: power supply rejection ratio] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Quiescent Current per Channel | [DATA_NEEDED: quiescent current per channel] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Product Type | — | Precision instrumentation amplifier |
| Internal Gain | — | 100 V/V |
| Architecture | — | 3-op-amp instrumentation amplifier |
| Input Offset Voltage Drift | — | 0.25 uV/°C maximum |
| Input Overvoltage Protection | — | ±40 V |
| Maximum Supply Voltage | — | ±18 V |
| Total Supply Voltage | — | 36 V maximum |
| Number of Inputs | — | 2 differential inputs |
| Số lượng đầu ra | — | 1 output |
| Hộp | — | 8-pin PDIP |
| Kiểu lắp đặt | — | Through-hole |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Điện áp yên tĩnh | — | [DATA_NEEDED: quiescent current] |
| Trạng thái RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |