INA133U vs INA133UG4 So sánh

So sánh chi tiết song song của INA133U bằng Texas Instruments và INA133UG4 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
INA133U INA133U - 1.5MHz Precision Difference Amplifier | TI

INA133U - 1.5MHz Precision Difference Amplifier | TI

INA133U Obsolete
Texas Instruments
INA133UG4 INA133UG4 - 1.5MHz Precision Differential Amplifier | Texas Instruments

INA133UG4 - 1.5MHz Precision Differential Amplifier | Texas Instruments

INA133UG4 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số INA133U INA133UG4
Thương hiệu Texas Instruments Texas Instruments
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Obsolete Hoạt động
Product Type Precision difference amplifier Precision difference amplifier
Amplifier Configuration Single amplifier —
Gain Unity gain —
Bandwidth 1.5 MHz —
Offset Voltage 450 µV maximum —
Offset Voltage Drift 5 µV/°C maximum —
Điện áp cung cấp 0.95 mA typical —
Input Common-Mode Rejection [DATA_NEEDED: input common-mode rejection] —
Input Bias Current [DATA_NEEDED: input bias current] —
Slew Rate [DATA_NEEDED: slew rate] 5 V/µs
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Supply Voltage Range [DATA_NEEDED: supply voltage range] 4.5 V to 36 V
Khoảng nhiệt độ hoạt động -40 °C to +85 °C [DATA_NEEDED: operating temperature range]
Hộp 8-pin SOIC 8-SOIC (0.154 inch, 3.90 mm width)
Kiểu lắp đặt Surface mount Surface mount
Resistor Network Laser-trimmed on-chip precision resistor network —
Common-Mode Rejection Mechanism Matched resistor-network tracking —
Trạng thái RoHS unknown Compliant
REACH Status unknown [DATA_NEEDED: REACH status]
Number of Circuits — 1 circuit
-3 dB Bandwidth — 1.5 MHz
Input Offset Voltage — 150 µV minimum; 450 µV maximum
Điện áp yên tĩnh — 950 µA
Khoảng điện áp đầu ra — ±2.25 V to ±18 V
Differential Gain — 1 V/V
Input Common-Mode Range — [DATA_NEEDED: input common-mode voltage range]
Common-Mode Rejection Ratio — [DATA_NEEDED: common-mode rejection ratio]
Độ dày tiếng ồn — [DATA_NEEDED: input noise density]
Rail-to-Rail Output — [DATA_NEEDED: rail-to-rail output capability]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá