INA141UAG4 vs AD621ARZ So sánh

So sánh chi tiết song song của INA141UAG4 bằng Texas Instruments và AD621ARZ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
AD621ARZ AD621ARZ - 800 kHz Instrumentation Amplifier | Analog Devices

AD621ARZ - 800 kHz Instrumentation Amplifier | Analog Devices

AD621ARZ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số INA141UAG4 AD621ARZ
Thương hiệu Texas Instruments Analog Devices
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Obsolete Hoạt động
Product Type Precision low-power instrumentation amplifier —
Amplifier Count 3 amplifiers —
Gain 10 or 100 —
Bandwidth 1 MHz —
Common-Mode Rejection Ratio 110 dB [DATA_NEEDED: common-mode rejection ratio]
Input Offset Voltage 20 µV —
Input Offset Voltage, Datasheet Listing 250 µV —
Input Noise Density 8 nV/√Hz —
Kiểu đầu ra Single-ended —
Hộp 8-SOIC, 0.154 inch body width, 3.90 mm width 8-pin SOIC
Kiểu lắp đặt Surface mount Surface mount
Supply Voltage Range [DATA_NEEDED: supply voltage range] Up to +/-18 V
Input Common-Mode Range [DATA_NEEDED: input common-mode range] [DATA_NEEDED: input common-mode voltage range]
Khoảng điện áp đầu ra [DATA_NEEDED: output voltage range] [DATA_NEEDED: output voltage range]
Điện áp cung cấp [DATA_NEEDED: typical supply current] [DATA_NEEDED: supply current]
Điện áp yên tĩnh [DATA_NEEDED: quiescent current] [DATA_NEEDED: quiescent current]
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Slew Rate [DATA_NEEDED: slew rate] 1.2 V/us
Gain Bandwidth Product [DATA_NEEDED: gain-bandwidth product] —
Input Bias Current [DATA_NEEDED: input bias current] 500 pA
Trạng thái RoHS [DATA_NEEDED: RoHS status] Compliant
Amplifier Type — Single-channel instrumentation amplifier
Number of Channels — 1 circuit
Small-Signal Bandwidth — 800 kHz
Output Offset Voltage — 75 uV
Gain Range — [DATA_NEEDED: gain range]
Input Noise Voltage — [DATA_NEEDED: input noise voltage]
Input Noise Current — [DATA_NEEDED: input noise current]
Gain Error — [DATA_NEEDED: gain error]
Gain Drift — [DATA_NEEDED: gain drift]
Power-Supply Rejection Ratio — [DATA_NEEDED: power-supply rejection ratio]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá