INA155UA vs INA163UA So sánh
So sánh chi tiết song song của INA155UA bằng Texas Instruments và INA163UA bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
INA155UA - 550 kHz Single-Supply CMOS Instrumentation Amp | TI
INA155UA ✓ Hoạt độngTexas Instruments
INA163UA - Low-Noise Instrumentation Amplifier | Texas Instruments
INA163UA ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | INA155UA | INA163UA |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Single-supply CMOS instrumentation amplifier | Low-noise, low-distortion instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Supply Voltage Range | 2.5 V to 6 V | [DATA_NEEDED: supply voltage range] |
| Nominal Single-Supply Voltage | 5.5 V | — |
| Bandwidth | 550 kHz | [DATA_NEEDED: bandwidth] |
| Input Offset Voltage | 1 mV | [DATA_NEEDED: input offset voltage] |
| Output Swing | Rail-to-rail output | — |
| Slew Rate | 6.5 V/us | [DATA_NEEDED: slew rate] |
| Amplifier Type | Instrumentation amplifier | — |
| Semiconductor Technology | CMOS | — |
| Hộp | 8-pin SOIC | 14-pin SOIC |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Gain Range | [DATA_NEEDED: gain range] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection] |
| Điện áp cung cấp | [DATA_NEEDED: supply current] | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Architecture | — | Monolithic current-feedback instrumentation amplifier |
| Output Current | — | [DATA_NEEDED: output current] |
| Gain | — | [DATA_NEEDED: gain configuration] |
| Input Noise | — | [DATA_NEEDED: input noise] |
| Distortion | — | [DATA_NEEDED: distortion] |
| Maximum Gain | — | [DATA_NEEDED: maximum gain] |
| Termination/Packing Code | — | UA package code |