INA2126UG4 vs INA126P So sánh

So sánh chi tiết song song của INA2126UG4 bằng Texas Instruments và INA126P bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
INA2126UG4 INA2126UG4 - 36V Dual Micropower Instrumentation Amplifier | TI

INA2126UG4 - 36V Dual Micropower Instrumentation Amplifier | TI

INA2126UG4 ✓ Hoạt động
Texas Instruments
INA126P INA126P - 36V MicroPower Precision INA | Texas Instruments

INA126P - 36V MicroPower Precision INA | Texas Instruments

INA126P ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số INA2126UG4 INA126P
Thương hiệu Texas Instruments Texas Instruments
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Device Type Dual precision instrumentation amplifier —
Channel Count 2 channels 1 channel
Maximum Supply Voltage 36 V 36 V
Supply Voltage Range ±1.35 V to ±18 V ±1.35 V to ±18 V
Single-Supply Minimum 2.7 V —
Điện áp yên tĩnh 175 µA per channel 175 µA/channel typical
Offset Voltage 250 µV —
Architecture Two-op-amp instrumentation-amplifier design Two-op-amp instrumentation amplifier
Input Type Differential —
Signal Type Low-level differential-signal acquisition —
Hộp 16-pin SOIC, 3.90 mm width 8-pin PDIP
Kiểu lắp đặt Surface mount Through-hole
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Gain Settings [DATA_NEEDED: available gain settings] —
Input Common-Mode Range [DATA_NEEDED: input common-mode range] —
Khoảng điện áp đầu ra [DATA_NEEDED: output voltage range] —
Gain Error [DATA_NEEDED: gain error] —
Noise Performance [DATA_NEEDED: input noise density] —
Bandwidth [DATA_NEEDED: signal bandwidth] —
Slew Rate [DATA_NEEDED: slew rate] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Product Type — Precision micropower instrumentation amplifier
Input Offset Voltage — 250 µV
Programmable Gain — 1, 10, 100, or 1000 using external resistor
Differential Signal Acquisition — Precision low-noise differential input
Terminal Count — 8 terminals
Package Shape — Rectangular DIP
Temperature Grade — Industrial
Application Class — Portable instrumentation and data acquisition
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá