ISL83485IP vs ISL83491IP So sánh
So sánh chi tiết song song của ISL83485IP bằng Renesas Electronics và ISL83491IP bằng Renesas Electronics. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Renesas Electronics
ISL83485IP - 3.3V 10Mbps Half-Duplex RS-485/RS-422 | Renesas
ISL83485IP ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | ISL83485IP | ISL83491IP |
|---|---|---|
| Thương hiệu | Renesas Electronics | Renesas Electronics |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | RS-485/RS-422 transceiver | 1/1 RS-485/RS-422 transceiver |
| Transceiver Configuration | 1 driver / 1 receiver | — |
| Duplex Mode | Half duplex | — |
| Điện áp cung cấp | 3.3 V | — |
| Maximum Data Rate | 10 Mbps | [DATA_NEEDED: maximum data rate] |
| Supported Standards | RS-485 and RS-422 | RS-485 and RS-422 |
| Process Technology | BiCMOS | — |
| Power Consumption Profile | Low power | — |
| Signal Type | Balanced differential | — |
| Hộp | 8-pin PDIP | — |
| Kiểu lắp đặt | Through-hole | Through-hole |
| Driver Enable Control | [DATA_NEEDED: driver enable logic polarity and pin assignment] | — |
| Receiver Enable Control | [DATA_NEEDED: receiver enable logic polarity and pin assignment] | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential receiver sensitivity] | — |
| Maximum Driver Output Current | [DATA_NEEDED: maximum driver output current] | — |
| Điện áp cung cấp | [DATA_NEEDED: typical and maximum supply current] | — |
| ESD Protection Rating | [DATA_NEEDED: ESD protection rating] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Technology | — | BiCMOS |
| Operating Mode | — | High-speed or slew-rate-limited |
| Package Type | — | 14-pin PDIP |
| Logic and Communication | — | Balanced differential RS-485/RS-422 |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Supply Shutdown Current | — | [DATA_NEEDED: shutdown current] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |