ISO120G-BI vs ISO120G So sánh
So sánh chi tiết song song của ISO120G-BI bằng Texas Instruments và ISO120G bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
ISO120G-BI - 60 kHz Precision Isolation Amplifier | Texas Instruments
ISO120G-BI NrndSo sánh thông số kỹ thuật
| Tham số | ISO120G-BI | ISO120G |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | NRND | NRND |
| Product Type | Precision isolation amplifier | Precision low-cost isolation amplifier |
| Number of Circuits | 1 circuit | — |
| Signal Bandwidth | 60 kHz | — |
| Rated Isolation Voltage | 1500 Vrms | — |
| Maximum Nonlinearity | 0.01% | — |
| Precision Configuration Bandwidth | 6 kHz | — |
| Maximum Voltage-Offset Drift | 150 uV/°C | — |
| Input Common-Mode Rejection | High at 60 Hz | — |
| Carrier Frequency | User controlled | User controlled |
| Operation | Bipolar | — |
| Partial Discharge Qualification | 100% tested | — |
| Hộp | 16-lead CDIP | 16-CDIP according to the DigiKey product result; related family listing also states 24-pin hermetic DIP |
| Package Pitch | 7.62 mm | — |
| Package Length | 0.300 inch | — |
| Kiểu lắp đặt | Through-hole | — |
| External Components for 60 kHz Bandwidth | None required | — |
| External Capacitors for Guaranteed Precision | 2 capacitors | — |
| Lifecycle Recommendation | Not recommended for new designs | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | unknown |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | — |
| Isolation Voltage Rating | — | 1500 Vrms |
| Input Range | — | 50 mV |
| Supply Voltage Range | — | ±4.5 V to ±18 V |
| Bandwidth | — | 60 kHz |
| Nonlinearity | — | ±0.01% maximum |
| Offset Voltage Drift | — | 150 µV/°C maximum at 6 kHz bandwidth with two external capacitors |
| Partial Discharge Testing | — | 100% tested for partial discharge for ISO120 |
| Bipolar Operation | — | Supported |
| Amplifier Count | — | 1 circuit |
| Lead Count | — | 16 leads according to the DigiKey product result |
| Isolation Class | — | Galvanic isolation amplifier |
| Input Type | — | Bipolar analog input measurement |
| Kiểu đầu ra | — | Differential isolation amplifier output |
| Manufacturer Product Family | — | ISO120 precision low-cost isolation amplifier |
| AEC-Q100 Qualification | — | unknown |