KSZ8031RNL vs KSZ8021RNL So sánh

So sánh chi tiết song song của KSZ8031RNL bằng Microchip Technology và KSZ8021RNL bằng Microchip Technology. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Microchip Technology
KSZ8031RNL KSZ8031RNL - 10/100 Ethernet PHY | Microchip Technology

KSZ8031RNL - 10/100 Ethernet PHY | Microchip Technology

KSZ8031RNL ✓ Hoạt động
Microchip Technology
KSZ8021RNL KSZ8021RNL - 10/100 Ethernet PHY RMII | Microchip

KSZ8021RNL - 10/100 Ethernet PHY RMII | Microchip

KSZ8021RNL ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số KSZ8031RNL KSZ8021RNL
Thương hiệu Microchip Technology Microchip Technology
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type 10Base-T/100Base-TX Ethernet physical layer transceiver 10Base-T/100Base-TX Ethernet physical-layer transceiver
Ethernet Speed Support 10 Mb/s and 100 Mb/s 10 Mbps and 100 Mbps
Điện áp cung cấp 3.3 V —
Giao diện Reduced Media Independent Interface (RMII) —
Duplex Mode Full duplex —
Cable Standard CAT-5 unshielded twisted pair (UTP) —
Port Count 1 port —
Hộp 24-QFN (4 x 4 mm) 24-QFN with exposed pad, 4 mm x 4 mm
Kiểu lắp đặt Surface mount Surface mount
RMII Reference Clock 25 MHz 50 MHz
Media Interface 10Base-T/100Base-TX Reduced Media Independent Interface (RMII)
Data Link Standard Ethernet —
Evaluation Board KSZ8031RNL-EVAL —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Maximum Ethernet Cable Length [DATA_NEEDED: maximum Ethernet cable length] —
RMII Clock Tolerance [DATA_NEEDED: RMII clock tolerance] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Physical Layer Standards — 10Base-T and 100Base-TX
Supply Configuration — Single supply
Cable Type — CAT-5 unshielded twisted pair (UTP)
Interrupt Support — Dedicated interrupt pin
Control Interface — PHY status and control registers
Polling Requirement — Processor polling not required when interrupt is used
Operating Voltage Range — [DATA_NEEDED: operating voltage range]
Maximum Link Rate — 100 Mbps
Kháng nhiệt — [DATA_NEEDED: junction-to-ambient thermal resistance]
Termination Scheme — [DATA_NEEDED: integrated cable termination details]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá